Home Blog  
Education / Training Quackenbush .25 pistol: Part 1

Quackenbush .25 pistol: Part 1

by B.B. Pelletier

Test data and photos by Earl “Mac” McDonald

Back in the 1990s, Dennis Quackenbush made a nice part of his living by modifying single-shot pistols from Crosman. In those days, there weren’t as many places to buy aftermarket parts, and Crosman didn’t have a custom shop. In fact, when Dennis and I were seated with Crosman’s CEO at an NRA Airgun Breakfast at the 2001 NRA Annual Meetings and Exhibits in Kansas City, Missouri, we introduced ourselves and he asked both of us what we did. Dennis told him that he made his living modifying Crosman single-shot pistols. “You sell them (the SSP 250) for $39 and I modify them for $125. I can’t keep up with all the work!”

To say the man was stunned is an understatement. I don’t think he believed Dennis, because he restated what Dennis had said, “You mean people pay you $125 to modify a gun that sells for $39?” You could hear the disbelief in his voice.

That man didn’t remain at the reins much longer. And his replacement, Ken D’Arcy, instituted the Crosman Custom Shop a few years after he stepped in. But that did not diminish the number of aftermarket places that modify Crosman airguns and make parts for owners to install. If anything, the number of places increased, though I would not say that it was in response to the Crosman Custom Shop starting up. But it was and still is a direct result of the openness of the Crosman Corporation toward their customers, by providing parts and information that support their guns.

For several years, one of the most popular modifications Dennis made was a steel breech for the Crosman 2240 single-shot pistol. Not only is it stronger and more rigid, it also allows for the installation of a scope — something that most home tinkerers will want to do. And Dennis switched the bolt handle to the left side for right-handed shooters, because they want to continue to hold onto the pistol while they load it. People who don’t shoot these pistols don’t understand that desire, but it only take 15 minutes with one and you understand completely. That one change may have been his greatest contribution, because it showed everyone what a little thought can do to enhance the operation of an inexpensive airgun!

Many of the handguns Dennis built on Crosman frames are righteous thumpers, with power levels far beyond anything Crosman ever envisioned. Dennis has made several guns on this 2240 frame that achieved 100 foot-pounds of energy at the muzzle, and I’ve personally witnessed one that produced 300 foot-pounds. So, like the modern AR, there’s no limit to what you can do with one of these flexible air pistols.

But in this report, we’re going to look at something a little closer to the original gun. It’s a .25-caliber pistol that has the steel receiver from Dennis and a 10.5-inch barrel that he rifled. In terms of power, it’s been left pretty close to original; so it gets a decent number of shots. Because of the large caliber, they don’t go very fast.


The Quackenbush .25-caliber pistol is built on a 2240 frame. It has a steel receiver, and the bolt is on the left side for easier loading.

There are no open sights, as Dennis envisioned owners would want to scope the gun. The receiver has an 11mm dovetail cut into the top. Since the frame is from a 2240, it readily accepts an add-on carbine stock that so many shooters seem to prefer. Certainly, when you put a heavy rifle scope on the pistol, the stock is the best way to go!

Mac reports that the pull length with the carbine stock is 16.3 inches, but the angle of the grip makes it feel shorter. He says it fits him well, and he usually likes a rifle with a pull length of 13 inches. I looked at the pictures he sent and see that the scope hangs back behind the receiver on this gun. That may be why the long pull doesn’t feel so bad. Also, the gun is very light, at only 48 oz. in the scoped pistol configuration, so there’s not a lot of weight hanging out front. The shoulder stock adds another 13 oz.


The optional shoulder stock is something nearly all pistol owners have.

Dennis didn’t number all of the guns that he made, but partway through the production he began to put his own serial numbers on them. His last gun carried the number 850. Mac’s pistol is numbered 509.

Though Dennis no longer makes complete guns, according to his website he still does make the parts for them so owners can modify their own guns. The velocity of the .25-caliber pistol is approximately the same as the 2240 that it was modified from when shooting a 14.7-grain .22-caliber pellet.

The features of this modification are:
Steel barrel, receiver and bolt
The barrel is threaded into the receiver
The transfer port is in the breech instead of the barrel
The new steel bolt is larger than the pellet
The bolt contacts the pellet’s skirt — no probe is used

The pistol is 14 inches long without the shoulder stock, and 26 inches in the carbine configuration. The trigger-pull is a repeatable 43 oz., though some may find the trigger blade a bit too thin for comfort. The scope you see here is a cheap Simmons that Mac thinks was probably a rimfire scope at one time. It has a one-inch tube and fixed 4x magnification. The 32mm objective lens has a fixed parallax that Mac adjusted to 25 yards by turning the lens locking ring.

While many .25-caliber single-shots produce lots of muzzle energy, this isn’t one of them. Those guns are modified into PCPs, where this one is still a CO2 gun. It gives you a taste of a larger caliber without all the extra fuss and noise that a magnum blaster would have.

Mac tells me this pistol is quite accurate, and he loves the way it lobs them in. Next time, we’ll combine Parts 2 and 3 for a good look at the performance of this vintage Quackenbush airgun.


With the longer barrel and no open sights, this pistol looks slicker than the 2240 it was modified from.

author avatar
Tom Gaylord (B.B. Pelletier)
Tom Gaylord, also known as B.B. Pelletier, provides expert insights to airgunners all over the world on behalf of Pyramyd AIR. He has earned the title The Godfather of Airguns™ for his contributions to the industry, spending many years with AirForce Airguns and starting magazines dedicated to the sport such as Airgun Illustrated.

28 thoughts on “Quackenbush .25 pistol: Part 1”

  1. Hi BB,
    For years I have read that #3 Hornady shot works well in 25 cal C02 or PCPs. I wouldn’t want to try it in a springer but it would be interesting to see how it shoots in Mac’s pistol.

    David Enoch

    • David,

      I have fired buckshot from several air rifles, including one that Gary Barnes made for me and then turned into the Barnes Ranger that Edith used to compete in BR-50. The buckshot worked well, though the accuracy was only mediocre. In those days Barnes was talking about hitting Oreo cookies. No animal, he said, could hide behind an Oreo cookie.

      I also used to own a black powder rifle that was designed to shoot number 4 buckshot, which is very close to .22 caliber.

      B.B.

  2. I was looking at the specs for the Evanix Semi/Auto air rifle. That rifle is crying for a 20 shot magazine. I wonder why they went with a 10 shot? It’s pricey but hey……..It’s full auto!

    Mike

    • Mike,

      There have been some changes on the specs for the Conquest, Speed & Max full-/semi-auto guns:

      .177=13 rds per mag
      .22=11 rds per mag
      .25=10 rds per mag

      Double mags are available again, and they are as follows:

      .177=26 rds per mag
      .22=22 rds per mag
      .25=20 rds per mag

      Edith

      • That’s an improvement. However, the double mags look like they need to be removed and reloaded into the gun to get the additional shots. They really need a high cap mag that will shoot 20 shots without switching the mag around. That would make a big difference it the sales potential of the rifle. I’ll bet an after market mag will show up if Evanix doesn’t make one.

        Mike

    • Well, one reason might be the need to keep the revolving cylinder to a reasonable diameter. If you double the number of rounds, you may need to (nearly) double the diameter of the cylinder. Ultimately, that’s why six rounds seems to be a pretty common load (plus/minus 1) for firearms.

      pete

  3. B.B. & Edith,

    Yes, I know that I’m your #1 cause of headaches.

    Is this in the queue for a review?
    /product/winchester-m14-co2-air-rifle?m=2719

    Will PA be providing a link to the manual on the website?

    Sorry.

    kevin

  4. B.B.

    Time to boast!
    http://i46.tinypic.com/2ufww44.jpg
    Assembled everything together for the first time. Surprisingly, everything fits quite easily and works as intended. Main lever is not fully closed to show the hook, long screw instead of a proper trigger, but nevertheless, the “engine” is here.
    A good point to take some day off. Tomorrow I’m leaving for Cologne, Rhine valley and maybe some Netherlands or Belgium, so a week of dolce far niente and beautiful landscapes fill get me back on my feet. And by that time, I hope, receiver will be ready 😉

    duskwight

  5. Hi BB

    This looks very interesting, but I think it’ll probably be restricted to a very small niche market. I’m not certain about the increase to .25 calibre whilst retaining the same powerplant. I doubt whether it will go much faster than 350 to 360 FPS and this will make it an expensive plinker using expensive ammo, but this is just me and I’m sure I’m missing the point. I have to admit that I really liked the Quakerbush .308; that one seemed to be really useful as a hunting rifle.

    Looking at really affordable handguns, I came across the Benjamin Trail NP Air Pistol. This really looks like something special at an unbelievable price. What about a test on this one, please!
    Regards
    Vasco

  6. I guess I ought to comment today,considering I went NUTS for Dennis’s guns a couple years ago……and haven’t come back yet! They are everything I ever wished for in a compact,accurate powerhouse!
    To be clear,all the ones I have are HPA only,except for one pistol (16″ long) with a Discovery tube
    that Walter Glover built using a Disco valve,pinned in with screws for safety.It works nicely for Co2
    or HPA.
    Dennis made “Outlaw” pistols…..that use the 2240 grip frame,and came in .22,.25,.308,357,& I believe .452…..although I don’t have the .457.My .25s are set up as carbines,and shoot Kings at 930-950 fps very accurately.Half inch 5 shot groups at 50 yards are common.
    Right now Lloyd Sykes has a .25 rifle,the “Knave” & a 9mm pistol “outlaw” to play with on loan.I figured a guy with his vision and talent is bound to dream up something excellent with Dennis’ guns for a muse.
    I look foreward to pts. 2&3……I remember reading Tom’s reviews repeatedly prior to my campaign to buy every DAQ I could afford.Now I just need a Shoebox compressor and a gross of JSB Kings in .25!

  7. A .375 cal one just sold on the CAF for a bit under 350$.
    It looks a lot like this one but with the 2250 plastic part under the tube where the CO2 powerlet goes, he claimed 15 shots from one powerlet.
    It sold in minutes, if he had a half dozen for sale they all would have sold before the end of the day… at 350$ each.

    • That was actually a pretty good price at $350…..the interest outweighs supply fairly consistently.
      I wish I could machine breeches……I understand it is NOT real easy.

Leave a Comment

Buy With Confidence

  • Free Shipping

    Get FREE shipping on qualifying orders! Any order $150+ with a shipping address in the contiguous US will receive the option for free ground shipping on items sold & shipped by Pyramyd AIR during checkout. Certain restrictions apply.

    Free shipping may not be combined with a coupon unless stated otherwise.

    View Shipping Info

  • Shipping Time Frame

    We work hard to get all orders placed by 12 pm EST out the door within 24 hours on weekdays because we know how excited you are to receive your order. Weekends and holiday shipping times will vary.

    During busy holidays, we step our efforts to ship all orders as fast as possible, but you may experience an additional 1-2 day delay before your order ships. This may also happen if you change your order during processing.

    View Shipping Times

  • Shipping Restrictions

    It's important to know that due to state and local laws, there are certain restrictions for various products. It's up to you to research and comply with the laws in your state, county, and city. If you live in a state or city where air guns are treated as firearms you may be able to take advantage of our FFL special program.

    U.S. federal law requires that all airsoft guns are sold with a 1/4-inch blaze orange muzzle or an orange flash hider to avoid the guns being mistaken for firearms.

    View Shipping Restrictions

  • Expert Service and Repair

    Get the most out of your equipment when you work with the expert technicians at Pyramyd AIR. With over 25 years of combined experience, we offer a range of comprehensive in-house services tailored to kickstart your next adventure.

    If you're picking up a new air gun, our team can test and tune the equipment before it leaves the warehouse. We can even set up an optic or other equipment so you can get out shooting without the hassle. For bowhunters, our certified master bow technicians provide services such as assembly, optics zeroing, and full equipment setup, which can maximize the potential of your purchase.

    By leveraging our expertise and precision, we ensure that your equipment is finely tuned to meet your specific needs and get you ready for your outdoor pursuits. So look out for our services when shopping for something new, and let our experts help you get the most from your outdoor adventures.

    View Service Info

  • Warranty Info

    Shop and purchase with confidence knowing that all of our air guns (except airsoft) are protected by a minimum 1-year manufacturer's warranty from the date of purchase unless otherwise noted on the product page.

    A warranty is provided by each manufacturer to ensure that your product is free of defect in both materials and workmanship.

    View Warranty Details

  • Exchanges / Refunds

    Didn't get what you wanted or have a problem? We understand that sometimes things aren't right and our team is serious about resolving these issues quickly. We can often help you fix small to medium issues over the phone or email.

    If you need to return an item please read our return policy.

    Learn About Returns

Get FREE shipping on qualifying orders! Any order $150+ with a shipping address in the contiguous US will receive the option for free ground shipping on items sold & shipped by Pyramyd AIR during checkout. Certain restrictions apply.

Free shipping may not be combined with a coupon unless stated otherwise.

View Shipping Info

Text JOIN to 91256 and get $10 OFF Your Next $50+ Order!

* By providing your number above, you agree to receive recurring autodialed marketing text msgs (e.g. cart reminders) to the mobile number used at opt-in from Pyramyd AIR on 91256. Reply with birthday MM/DD/YYYY to verify legal age of 18+ in order to receive texts. Consent is not a condition of purchase. Msg frequency may vary. Msg & data rates may apply. Reply HELP for help and STOP to cancel. See Terms and Conditions & Privacy Policy.