Interesting gun designs — Benjamin Legacy: Part 4

by Tom Gaylord
Writing as B.B. Pelletier

Part 1
Part 2
Part 3

Benjamin Legacy SE
Benjamin Legacy with a gas spring was a short-lived breakbarrel.

This report covers:

  • Getting started
  • The hold
  • First group
  • Second group
  • After that
  • Additional data
  • What’s next?

Let’s look at the accuracy of the .22-caliber Benjamin Legacy gas-spring rifle. If you remember, this was a rifle that came out just before I went into the hospital in 2010. When I got out 3 months later, the gun had already been taken off the market. I never reviewed it for you because it was an airgun you couldn’t buy, but the fact that it only took 16 lbs. of force to cock it fascinated me. I wanted to see what it could do regardless of whether or not you could buy one; because, if this turned out to be a good idea, it’s worth doing again. read more


Interesting gun designs — Benjamin Legacy: Part 3

by Tom Gaylord
Writing as B.B. Pelletier

Part 1
Part 2

Benjamin Legacy SE
Benjamin Legacy with a gas spring was a short-lived breakbarrel.

This report covers:

  • Something special from the back room!
  • Benefits of a lower-pressure gas spring
  • Trigger
  • Lower power
  • RWS Hobby pellets
  • Crosman Premier pellets
  • JSB Exact RS pellets
  • The point of this review

Something special from the back room!

I’m going slow with this report, because it concerns an airgun you cannot purchase. Read Part 2 to see where I found out about the .22-caliber Benjamin Legacy breakbarrel with a gas spring — not the Legacy with a steel spring that sold many years earlier. In the 3 months between the time I contracted pancreatitis in March of 2010 until I was discharged from the last hospital in June of that year, the Benjamin Legacy with gas spring was born, died and forgotten. I never had the chance to review it for you. read more


Interesting gun designs — Benjamin Legacy: Part 2

by Tom Gaylord
Writing as B.B. Pelletier

Part 1

This report covers:

  • Something special from the back room!
  • Easy to cock
  • Smooth shooting
  • Testus interruptus
  • No more Legacy
  • Something’s coming — maybe
  • The rifle
  • Cocking effort 16 lbs.
  • A modern Diana 27?

Today’s report is the reason I wrote the whole report about interesting designs. Today, I’m going to address what I’ve wanted to show you for the past 5 years. This is an interesting story, so fill your cup, sit back and enjoy.

It began in 2009, when Paul Capello and I started the television show American Airgunner. We needed content for the show, and the Crosman Corporation in East Bloomfield, New York, invited us to come in and film their operation. I had toured parts of their plant before, and I knew there was a lot to see.

Something special from the back room!

During the tour, their head engineer, Ed Schultz, asked if we would like to see something special. Naturally, we were excited! He took us out a back door next to the bulk CO2 tank that fills all the cartridges they make. Then, he told us about a secret project of his. read more