Date: 9/4/2020 23:11
0

Customer Reviews for Diana Fill Probe

Average Customer Review

4.0 (4 reviews)
3 star2 star1 star
Diana Fill Probe
Pre-order

Out of Stock

Create an online review   and share your thoughts with other customers

The most helpful favorable review

0 of 0 people found the following review helpful:

Overall rating:5.0

Value for money:5.0

By JERRY from USA on 2018-09-15 08:26:33

Things I liked: Well machined part

Things I would have changed: A little thicker O-ring for a tighter fit

What others should know: I thought I had a problem with my original probe because I couldn't get the airgun to pressurize. The probe seemed loose at the air pump adapter connection. I compared dimensions between the pump's test plug and the probe and the fill probe seemed to be machined undersized. I called Pyramid .and they quickly sent me a new one at no charge - same loose fit as the original. After going back and forth with Pyramid several times, I asked if they'd had any other issues with the fill probe. They hadn't. Final fix was that apparently I hadn't lubed the probe's o-rings quite enough and they weren't able to seat properly. Note: Lube the o-rings! Lesson learned for an old newbie to the PCP club.

The most helpful critical review

0 of 0 people found the following review helpful:

Overall rating:4.0

Value for money:3.0

By Joseph from USA on 2019-08-18 13:41:18

Things I liked: The second one they sent fit perfectly and was usable with my other female hose ends. Works well with the Stormrider.

Things I would have changed: Quailty control.

What others should know: The first one I got was so big it did not fit anything but the hand pump female hose end and that was tight. Even with sanding it down it would not fit the normal connectors Pyramydair was great to send another one without any issue - thanks!

Sort by:
  • 4.0 4.0

    3.0 3.0

    By Joseph from USA on 2019-08-18
    See all my reviews
    Was this review helpful?
    0.00 ratings

    Verified Purchase

    Things I liked: The second one they sent fit perfectly and was usable with my other female hose ends. Works well with the Stormrider.

    Things I would have changed: Quailty control.

    What others should know: The first one I got was so big it did not fit anything but the hand pump female hose end and that was tight. Even with sanding it down it would not fit the normal connectors Pyramydair was great to send another one without any issue - thanks!

     
  • 4.0 4.0

    3.0 3.0

    By George from USA on 2019-02-04
    See all my reviews
    Was this review helpful?
    5.01 rating

    Verified Purchase

    Things I liked: The looks and value of the rifle cought my eye .

    Things I would have changed: The fill probe would have threads on end or made to fit all quick connects properly . Shouldn't have to wait for two shipments to get a wayto fill a $ 200 + item .

    What others should know: Other than the machining falts with fill probe its a very nice rifle , good feel , nice shooting .just wish i could have had only had positive things to say about it . To think a dollar item almost cost the sale .if not for the sales staff at pyramid air i would have sent it back dissatisfied . Thank you

     
  • 4.0 4.0

    3.0 3.0

    By George from USA on 2019-02-04
    See all my reviews
    Was this review helpful?
    5.01 rating

    Verified Purchase

    Things I liked: The looks and value of the rifle cought my eye .

    Things I would have changed: The fill probe would have threads on end or made to fit all quick connects properly . Shouldn't have to wait for two shipments to get a wayto fill a $ 200 + item .

    What others should know: Other than the machining falts with fill probe its a very nice rifle , good feel , nice shooting .just wish i could have had only had positive things to say about it . To think a dollar item almost cost the sale .

     
  • 5.0 5.0

    5.0 5.0

    By JERRY from USA on 2018-09-15
    See all my reviews
    Was this review helpful?
    0.00 ratings

    Verified Purchase

    Things I liked: Well machined part

    Things I would have changed: A little thicker O-ring for a tighter fit

    What others should know: I thought I had a problem with my original probe because I couldn't get the airgun to pressurize. The probe seemed loose at the air pump adapter connection. I compared dimensions between the pump's test plug and the probe and the fill probe seemed to be machined undersized. I called Pyramid .and they quickly sent me a new one at no charge - same loose fit as the original. After going back and forth with Pyramid several times, I asked if they'd had any other issues with the fill probe. They hadn't. Final fix was that apparently I hadn't lubed the probe's o-rings quite enough and they weren't able to seat properly. Note: Lube the o-rings! Lesson learned for an old newbie to the PCP club.

     
Navigation