Date: 14/8/2022 9:4
0

Air Venturi Female Quick-Disconnect Adapter Reviews

Air Venturi Female Quick-Disconnect Adapter, 1/8" BSPP Male Threads, Steel, Rated to 5000 PSI

Average Customer Review

4.0 (58 reviews)

Create an online review   and share your thoughts with other customers

The most helpful favorable review

1 of 1 people found the following review helpful:

5.0 5.0

5.0 5.0

By edgar from USA on 2011-11-15 23:39:36

Things I liked:

Basic simple design.It works on my Marauder.

What others should know:

Add teflon tape to the treads to reduce the possibility of any air leaks.

The most helpful critical review

0 of 0 people found the following review helpful:

1.0 1.0

1.0 1.0

By Joel from USA on 2013-10-07 13:09:14

Things I liked:

Nothing

Things I would have changed:

Whatever it takes to make it not leak

What others should know:

Buy the $25.00 one-it's plated to resist rust & made super heavy-duty!

Sort by:
Filer by:
  • 123 Next
  • 5.0 5.0

    4.0 4.0

    Things I liked:

    I don't understand? In Pyramyd Air's description, it says that this adapter, AV-00026, does not work with the Hill hand pump hose. It's been working fine, connecting my Hill Pump MK3 to my Marauder for years. Why do they think this adapter doesn't work with the Hill pump hose? What am I missing?

  • 1.0 1.0

    1.0 1.0

    Things I liked:

    Nothing

    Things I would have changed:

    Whatever it takes to make it not leak

    What others should know:

    Buy the $25.00 one-it's plated to resist rust & made super heavy-duty!

  • 4.0 4.0

    4.0 4.0

    Things I liked:

    Simple and easy to use.

    Things I would have changed:

    Nothing works great

    What others should know:

    Nope!

  • 1.0 1.0

    1.0 1.0

    Things I liked:

    Seems to have solid construction.

    Things I would have changed:

    Test it before shipping

    What others should know:

    This product started leaking air on first use. Double checked tightness and tried again, leaked again. I am going to check the website for hill handpumps and see if they sell a foster adaptor since its a hill pump.

  • 4.0 4.0

    4.0 4.0

    Things I liked:

    good fittings, works well!

    Things I would have changed:

    May be made of stainless steel!

    What others should know:

    this really fits and works fine , always put the tread tape. so it wont leak...

  • 1.0 1.0

    1.0 1.0

    Things I liked:

    Nothing

    Things I would have changed:

    Sell a better quality

    What others should know:

    This QD failed on the first use. We had to struggle and pry to get it off the gun. To their great credit, PA immediately refunded my money and I bought another QD from a different vendor.

  • 5.0 5.0

    5.0 5.0

    Things I liked:

    What can you say it works. A little stiff but it should be easier later.

    Things I would have changed:

    put a small strip of teflon tape in the package

    What others should know:

    none

  • 4.0 4.0

    2.0 2.0

    Things I liked:

    Works well.

    Things I would have changed:

    The price is high for what it is, sticks every noe and then but a little silicone keeps it smooth.

  • 5.0 5.0

    5.0 5.0

    Things I liked:

    It works.

    Things I would have changed:

    If it isn't broke do nothing.

    What others should know:

    Tapered threads no tape needed.

  • 5.0 5.0

    4.0 4.0

    Things I liked:

    This is a top of the line fitting that is easy to use.

    Things I would have changed:

    Some type of coating or plating would be nice.

  • 3.0 3.0

    1.0 1.0

    Things I liked:

    Fits the Air Venturi Microbore Hose and uses less air than my Hill pumps stock hose.

    Things I would have changed:

    Offer it with on the microbore hose and adjust the price down.

  • 3.0 3.0

    2.0 2.0

    Things I liked:

    It's a QD fitting and it works, when it feels like working.

    Things I would have changed:

    I have to wiggle it a bit to secure it to the Air Force Spin Loc tank to get the seal going then it's good all the way. There were times when I had to wiggle it many times and the air keep leaking out from the QD side. It's a Quick Disconnect but actually I have a hard time to "connect and disconnect" every time. Better QC would be nice.

    What others should know:

    It gets the job done but the quality could be better for the money you spend on it. The QD is not smooth fitting and the BBs around it could almost fall out if not careful. I did have to use the Teflon tape to secure it to the 1/8 BSPP connection for the Hill pump. With the Air Force Talon SS I actually installed the Spin Loc tank with the QD nozzle pointing down to about 4 o'clock so the fitting goes on right without the hose bending too much from my Hill pump and I can read my tank's air gauge better now it points up to my eyes.

  • 4.0 4.0

    4.0 4.0

    Things I liked:

    Well made adapter. Thank goodness for quick connectors

  • 5.0 5.0

    5.0 5.0

    Things I liked:

    Great quality built solid

    Things I would have changed:

    Nothing

    What others should know:

    Its a flare 1/8 conection so if thers some kina leak from the threads it may need to be tighten a bit do not use teflon(plumers tape/thread sealant) a flare fitting is not ment for that, make sure its clean be for you put together onto pump this will help insure seal.

  • 4.0 4.0

    4.0 4.0

    Things I liked:

    Works well with the Air Venturi I purchased to fill my PCP rifles

  • 4.0 4.0

    4.0 4.0

    Things I liked:

    I bought this out of necessity. I let a friend borrow my Benjamin pump and he brought it back with a different hose on it since he had destroyed my original hose by slamming it in the car door. So in order to use mt pump again I had to buy a fitting so it would connect to my guns again. I wasn't happy about this. My first one I ordered would fit my discovery but try as I might it would not fit my condor. I told pyramyd air about the problem and they sent me another fitting that worked with all my guns. Evidently my first one was out of spec from the factory.

    Things I would have changed:

    The factory that makes these (I'm assuming it is in China due to poor quality control) needs to learn quality control and apply it since these are a precision high pressure bearing fixture that has potential to hurt someone if they fail at high enough pressure.

  • 5.0 5.0

    5.0 5.0

    Things I liked:

    Easy install on Hill Pump. I like the non reflective color.

    Things I would have changed:

    Nothing.

    What others should know:

    First few connect/disconnect cycles were a little tight on a brand new qick fill. After a few fills, it is all smoothed out. Nice audible "click" when fully connected.

  • 5.0 5.0

    5.0 5.0

    Things I liked:

    Quality construction. Does what it's supposed to do.

    Things I would have changed:

    Nothing

  • 1.0 1.0

    1.0 1.0

    Things I liked:

    Price is reasonable. But I would rather pay for quality.

    Things I would have changed:

    Better machining and/or quality control so it would work.

    What others should know:

    Function is so sticky it doesn't work, unless you push-turn-wiggle and shout at it. Didn't get any use out of this item. PA should offer an alternate quality item.

  • 5.0 5.0

    5.0 5.0

    Things I liked:

    Its verry mooth to release and snap together

    Things I would have changed:

    nothing

  • 123 Next

Buy with confidence

Get FREE shipping on qualifying orders! Any order $150+ with a shipping address in the contiguous US will receive the option for free ground shipping on items sold & shipped by Pyramyd Air during checkout. Certain restrictions apply.

Free shipping may not be combined with a coupon unless stated otherwise.

View Shipping Info

Text JOIN to 91256 and get $10 Off Your Next $50+ Order.

* By providing your number above, you agree to receive recurring autodialed marketing text msgs (e.g. cart reminders) to the mobile number used at opt-in from Pyramyd Air on 91256. Reply with birthday MM/DD/YYYY to verify legal age of 18+ in order to receive texts. Consent is not a condition of purchase. Msg frequency may vary. Msg & data rates may apply. Reply HELP for help and STOP to cancel. See Terms and Conditions & Privacy Policy.