Page 2 - Air Venturi Female Quick-Disconnect Adapter Reviews

Works great.

Nothing

Good fit for my Discovery, when I need a quick fill from my SCUBA tank.

Probably expensive for the quick fills. So it has been worth it.

Watch you air gages carefully. The Discovery has a small tank when compared to the Sumatra. Fill slowly and carefully.

Working great. Easy to operate with. Good quality.

Overpriced.

Required to fill Benjamin Marauder with Air Venturi Scuba tank adapter. It fits once you tighten it with wrench and does not leak.

Air Venturi should sell their Scuba adapter with this, or make a separate quick disconnect Scuba tank adapter.

Necessary for filling Benjamin Marauder, If you buy Air Venturi Scuba adapter you HAVE TO buy this to fill it!

My came apart after only 2 fills on my Benjamin Marauder. PA 's excellent Customer Service was quick to send a free replacement, but the quality is just not that good.

Poor quality.....much better in stainless steel

Got rig from airtanksforsale for my Hill pump and Shoebox Freedom 8 compressor. FLAWLESS!!!

Works great - no leaks. Allows me to share 3 PCP airguns.

Pricey...

Added a hint of "yellow No. 5" teflon paste to the threads.

This connector works great. I have the Benjamin High-Pressure Hamd Pump and I separated the hose from the pump body with this connector Screwed into the pump body with a little Permatex Ultra Black Gasket Maker On the threads.

nothing

Nothing. The first one came apart on the fill nipple and had to have a weld shop remove it. The second one kept getting hung up as well. Got a new fill adaptor and a SS Foster fitting and now it works great

Get 4500psi stainless steel. Foster fittings. They work great.

Pyramyd Air provides great customer service if you have a problem. You can rely on them.

Not much, it doesn't work...

I would have Pyramid Air make sure the adapter works before they ship it.

You know that feeling you got when you were a kid, and you got a REALLY cool toy for Christmas, but you couldn't use it because your parents forgot to buy the batteries it needed? I just experience a very similar feeling. I just rec'd my new Benjamin Marauder, Hill pump and adapter from Pyramyd Air this afternoon. I mounted my scope, assembled the pump and installed the adapter on the hose. Then I tried to attach the female adapter to the male connector on my new Marauder (that had the 10 for $10 test, so I know the male connector is fine), and it will NOT go all the way on. It appears the O-Ring in the adapter is too small. BTW, I've worked with fittings like this in the past, I know how to use a connector like this. I am VERY frustrated. I'm sure Pyramyd Air will get me a working adapter, but I seriously doubt I'll get it by Christmas day (today is the 22nd).

Gets a good tight seal on my Benjamin Marauder, connects and disconnects easily and it had no problem handling 3000 psi. All in all I'm pleased with how this works.

This fits VERY loosely in the Hill Mk3 Pump. It would be nice to have a fitting that fit a bit better with that particular pump's hose - particularly at this price. The loose fit, and knowing how much tape is in those threads, makes me wonder how long the seal will last.

Use a LOT of tape. I finally went around 5-6 times before getting a good seal between this fitting and the hose of my Hill Mk3. Can't say how it fits other applications.

Works great does not leak and good product.

Cost way to much for such a coupler. You can buy full size high end brass coupler for air for 5 bucks. Why is this one 20.00?

You got to have it so you got to pay the price. But you will see when you get it it should be made of gold!

It work

The Fitting is difficult to attach to the Maruader male fitting and VERY hard to get off after fitting. Pyramin Air sent a second one and it seems to be the same way,, Good thing Pyramid Air stands behing what they sell.

Hard to connect and harder to get off but it is the only thing that works.

The connector does what it is designed for. It allows me to connect my Benjamin Marauder to a Hill air pump.

Should be included with the pump.

clicked right on the fill port for my mrod... nice!

If it was a larger physical diameter it would make operation a bit easier for older hands.

have fun! this is a great little adapter. Once you put it on your fill line check it for leaks with some soapy water. Don't for get to use some teflon tape to prevent leaks.

Black finish

A little bit small and fiddly, hard to attach to the Marauder (this might be something I would change on the Marauder rifle)

This is a necesity for the Hill pump and the Marauder.

works well with my hill pump

this is the fitting that fits the .22 cal Benjamin Marauder Air Rifle

Excellent quality

price? LOL

This will work very well with the Hill Pump for the Marauder. I got the Air Venturi Microbore hose which has the same 1/8" BSPP threads required for the Hill Pump. Works like a charm.

fits with the airforce quick disconnect and hill pump.

It works as it should. Excellent recommendation by chat service.

Fit and finish were better than I expected

longer threaded end

I had to use 5 layers of teflon tape (no sweat since I always have it handy) to get a good seal, it fits pretty loose in the hill pump's hose.

Does its job.

The price is extremely high for such a small piece. Price needs to be a little lower.