Page 3 - Air Venturi Female Quick-Disconnect Adapter Reviews

Very high quality. Ease of use.

Weigh 160lbs and dont lift weights. Its still very easy to fill my PCP to 3000psi.

It is what it is

This thing needs longer thread to work with Hill pump and Marauder gun. The BSPP seals up via tapered ends being pushed up against each other. The problem with this fitting is the tread is too short and the connector from the Hill pump comes up against the hex part of the fitting before the 2 tapered ends meet each other. Now they do meet up but it leaks. So what i ended up doing is getting an adapter from McMaster Carr Part number 4092K91 which adapts the BSPP tread to NPT tread. That will allow you to put a female 1/8 foster fitting on the other end of the McMaster Carr fitting

You can't get this to stop leaking when trying to attach Hill pump to this. You need a work around. Mcmaster carr part number 4092K91 and a female 1/8 foster work great

size ease of use

1/8 inch more threads. item would not make complete connection to a Hill pump/hose. Pyramyd Air sent a foster connector that made every thing work.

Attached easily to hose, did not leak.

Nothing.

I used this fitting to connect the Hill pump to my Marauder .25. It works perfectly.

Well made and works great.

Chrome plate

Alway's ask the support line people if this is the correct one for your weapon (PCP), its free.

Works great for changing fill adapters between multiple pcp guns. Need one of these if you're filling a Marauder.

Machining on threads is a little course,

Easy to screw into my scuba tank adapter and easy to connect and disconnect from my marauder.

Seems too expensive for such a small piece

It works plain and simple. Needed the AV female QD for my Marauder to work with my Hill pump.

Nothing; what is there to change as far a function???? Pricey for what it is! This is really at best a $8 item plain and simple.

You need to use plumbers tape around the threads to make it airtight or risk over tightening it.

Works perfect with my Marauder. Quick and easy connecting.

nothing

Use pipe tape for solid seal to air pump hose.

Works good.

Nothing.

I think fittings should come with the pumps you buy. Just my opinion.

Works good on my marauder pistol.

none

A little expensive but seems to be the going rate for this type of connection.

Basic simple design.It works on my Marauder.

Add teflon tape to the treads to reduce the possibility of any air leaks.

If you have more than one PCP gun with different air-charge probes, this is pure gold in convenience. Put this on the air hose end from the tank and get the "female" threaded version for each air probe. This allows tooless quick change from each gun's probe. I am a convenience nut!

Better thread machining. A bit rough so make sure you start them properly, not cross-threaded.

Air Venturi Male Quick-Disconnect, 1/8" BSPP Female Threads, Steel, Rated to 5000 PSI, Incl. Delrin Seal

It makes up for a distinct short coming by Benjamin and Pyramid. When I received my BJ Marauder Pistol, I was unable to charge it with air and try it out because BJ did not include it with the piece. This was my first air gun from Pyramid (out of 8) that did not come with a much needed fitting. Pyramid's short coming was not informing the buyer in the online ad that they needed to purchase it with the gun. That meant that I had to pay $8 shipping on a $20 item that should have been included or shipped with the gun under the "free shipping" that Pyramid provides. The fitting works very well and I prefer it to the "probe with O-rings" type. Much more secure when filling from high pressure air tank.

Benjamin should have included it.

Pyramid should have offered to ship it free in a plain envelope since it was partly an error on their part. P.S. love the Marauder Pistol.

seems to be well made

A sealing gasket is necessary and it should come with one but doesn't.

For PCP you should used steel not brass, unless the brass specifically says rated for >3000 psi

Disconnects with ease. Threads are done real smooth and it holds air great. I put a couple of wraps of teflon tape on but I don't even know if it would have needed them.

Perhaps make it a little larger and beefier.

Good little quick disconnect. I am using 3300psi into a 400cc reservoir and going into a large Parker fitting on my gun. I am running a lot of pressure and this little thing works great. You can pay more but it won't work any better.

excelent quality,good steel,perfect fit.

nothing

better than some of the plated fittings out there,best buy for your money IMO.

High pressure rated.

Quality of threads; burrs from machining.

Best used with an Air Force male quick disconnect.