Date: 7/2/2023 9:39
0

Replacement Probe, 1/8 BSPP, Fits Reviews

Replacement Probe, 1/8 BSPP, Fits Shinsung/Career, Sumatra & Seneca Rifles

Average Customer Review

4.5 (19 reviews)
Add to Cart

Only 1 left in stock

Create an online review   and share your thoughts with other customers

The most helpful favorable review

0 of 0 people found the following review helpful:

5.0 5.0

3.0 3.0

By Travis from USA on 2010-01-11 13:17:13

Things I liked:

well its purely a replacement part but works as intended

Things I would have changed:

should be made of stronger metal, the original one i got with my gun broke in half, needs to be around 10 bucks, which would be more worth the price

What others should know:

make sure to keep it clean, i suggest getting the quick disconnect fittings, so you can take it off and say keep it in your pocket or if you have the AIR venturi g4 hand pump keep it in the handle

The most helpful critical review

0 of 0 people found the following review helpful:

1.0 1.0

1.0 1.0

By Robert from USA on 2015-11-16 14:07:33

Things I liked:

I just had to order a second one because the first one snapped in two when I went to remove it from the fill port of my career 707. I had only had it around a month which should tell you how poor the quality is. The probe snapped into two pieces without me using any unusual level of force. I am old fashioned in that I think metal used for high pressure air should not snap so easily. I'm lucky that it didn't cause a serious injury as I had already bled the line when it snapped. I am annoyed that I have no choice but to buy another one as it is not like I have an alternative if I want to use my air rifle again.

Things I would have changed:

As you can guess, I would prefer one that didn't snan after only a month (or ever).

What others should know:

If you have the option to get a better one made somewhere, I would do that instead. if you are stuck with this one like me, be very careful....

Sort by:
Filer by:
  • 5.0 5.0

    5.0 5.0

    Things I liked:

    Works just fine in my Sumatra

    What others should know:

    Wished i had of discovered the Male quick disconnect w/o-ring Part # Quick-Disconnect Male Fitting + O-Ring... that screws on the end of bottom tube 1st, coulda saved me 20 bucks. These are kinda thin and all o-rings are fragile and being Xtra tedious every time ya fill (which is alot on the Sumatra) is tiresome. I just ordered the afore mentioned, makes things simpler, sturdier. Make sure you use silicone grease (oil too thin) to keep them o-ring safe. Ive filled mine countless times w/ no issues. But i bought this as a back up before i knew about the other deal. I never broke the original, now i have 2...Research

  • 5.0 5.0

    3.0 3.0

    Things I liked:

    fits where it is supposed to

    Things I would have changed:

    if anything the price

    What others should know:

    to be honest when i got to hand pumping my careers 9mm and 707 i went back to my break barrels again. at 68 years old now hand pumping is a real job and break barrels are easy once you learn to leverage the actions.

  • 5.0 5.0

    5.0 5.0

    Things I liked:

    There's not a lot like with this fill probe. It looks to be very well made.

    Things I would have changed:

    Change needed is on fill end of the resivior. Need a quick connect fitting.

    What others should know:

    O-rings are hard to find( the 2 on the end. They are easily damaged. Get extras 4-6.

  • 5.0 5.0

    5.0 5.0

    Things I liked:

    There's not a lot like with this fill probe. It looks to be very well made.

    Things I would have changed:

    Change needed is on fill end of the resivior. Need a quick connect fitting.

    What others should know:

    O-rings are hard to find( the 2 on the end. They are easily damaged. Get extras 4-6.

  • 5.0 5.0

    5.0 5.0

    Things I liked:

    Helped and allowed me to fill a airgun.

    What others should know:

    The seals ripped on using it the second time.

  • 5.0 5.0

    5.0 5.0

    Things I liked:

    Well made, works perfectly!

    Things I would have changed:

    Nothing.

    What others should know:

    Pyramyd Air rocks, great products and quick shipping! Great customer support!

  • 1.0 1.0

    1.0 1.0

    Things I liked:

    I just had to order a second one because the first one snapped in two when I went to remove it from the fill port of my career 707. I had only had it around a month which should tell you how poor the quality is. The probe snapped into two pieces without me using any unusual level of force. I am old fashioned in that I think metal used for high pressure air should not snap so easily. I'm lucky that it didn't cause a serious injury as I had already bled the line when it snapped. I am annoyed that I have no choice but to buy another one as it is not like I have an alternative if I want to use my air rifle again.

    Things I would have changed:

    As you can guess, I would prefer one that didn't snan after only a month (or ever).

    What others should know:

    If you have the option to get a better one made somewhere, I would do that instead. if you are stuck with this one like me, be very careful....

  • 5.0 5.0

    5.0 5.0

    Things I liked:

    This probe fit a lot better than the one that came with the gun. It will work with a Sam Yang .50 cal Dragon Claw. Kind of confusing calling it a "Career" replacement probe.

    Things I would have changed:

    List the Airguns that this will work with.

  • 5.0 5.0

    5.0 5.0

    Things I liked:

    Always nice to have a spare, one for the tank and the other for a pump. Good quality, priced okay. When you need one you need one.

    What others should know:

    Fits my Sumatra perfectly

  • 5.0 5.0

    5.0 5.0

    Things I liked:

    It fit my old shinsung rifle just right.

    Things I would have changed:

    Nothing

    What others should know:

    You should lube lightly so "o" rings will last.

  • 2.0 2.0

    1.0 1.0

    Things I liked:

    Item needed to refill airgun

    Things I would have changed:

    Cheaply made of potmetal. I have gone through 2 of these. Can be dangerous when they break. Hold gun very steady when filling to avoid any additional pressure on this probe.

  • 4.0 4.0

    4.0 4.0

    Things I liked:

    good probe for the money

    Things I would have changed:

    but seals on the probe can be a little more air tigh

    What others should know:

    Shipping for this Item is more then what it need to be can be shipped for $5.15 with tracking with usps

  • 4.0 4.0

    3.0 3.0

    Things I liked:

    Replaced my broken one lol

    Things I would have changed:

    price, finish, better grade o-rings

    What others should know:

    I've tested the o-rings to 3600psi, though they are low grade they are up to the test of filling strong valved sam yang rifles

  • 3.0 3.0

    1.0 1.0

    Things I liked:

    does the job what else could one expect from just looking at this simple part. material wise its a probe end of story- i bet at the machine shop they are shot out by the hundreds by an automatic machine.

    Things I would have changed:

    THE PRICE why? its a part that can be damaged very easy because it has fine theads and is made of bronze- bet made in china

    What others should know:

    its way over priced. pyramyd: make money in other things these parts should be value added perks to the customers- reduce the price-the profit comes from getting more pcp customers!

  • 5.0 5.0

    5.0 5.0

    Things I liked:

    Fit like it should works good

    Things I would have changed:

    nothing

    What others should know:

    nothing

  • 5.0 5.0

    5.0 5.0

    Things I liked:

    I had tried to use my Hill pump to air up my Shinsung 9mm Career Ultra for months without success before I finally got one of these probes. The original set up required a series of adaptors to allow the British pipe threads of the Hill pump to attach to the American JIC threads on the original probes that I purchased, Because of this series of adaptors, I could not seem to stop all the air leaks. After buying one of these probes that have the same British pipe threads as the Hill pump's supplied hose, and getting some silicone o-ring grease I finally got a good air seal and was able to pump up my gun.

    Things I would have changed:

    Nothing!

    What others should know:

    It you have a Hill pump and a Shinsung Career air gun or similar, GET ONE OF THESE PROBES!

  • 5.0 5.0

    3.0 3.0

    Things I liked:

    well its purely a replacement part but works as intended

    Things I would have changed:

    should be made of stronger metal, the original one i got with my gun broke in half, needs to be around 10 bucks, which would be more worth the price

    What others should know:

    make sure to keep it clean, i suggest getting the quick disconnect fittings, so you can take it off and say keep it in your pocket or if you have the AIR venturi g4 hand pump keep it in the handle

  • 3.0 3.0

    4.0 4.0

    Things I liked:

    Sturdy construction; looks like the perfect probe for some guns--just not mine.

    Things I would have changed:

    Make it clear somewhere in the advertising that it is not for a Sumatra Carbine--too loose a fit--air leaked a lot every time I used it.

    What others should know:

    While I did manage to fill my Sumatra Carbine with it to (almost?) full pressure, the leaking was a pain. I was able to improve performance by careful wrapping of the ends of the shaft with Teflon tape, leaving the air holes unobstructed, then lubing with silicone grease. My next experiments would have involved using fine thread to hold the tape in place, but I finally decided to purchase a male/female pair of quick connect adapters, which are (comparatively) a joy to use and waste no air at all.

  • 4.0 4.0

    5.0 5.0

    Things I liked:

    sturdy, easy to use

    Things I would have changed:

    add a quick disconnect instead of the screw on threads

    What others should know:

    if you're using a hand pump, make sure you don't pull on the fill probe, loss of air, even small amounts at high pressure, are a pain to pump by hand.

Buy with confidence

Get FREE shipping on qualifying orders! Any order $150+ with a shipping address in the contiguous US will receive the option for free ground shipping on items sold & shipped by Pyramyd Air during checkout. Certain restrictions apply.

Free shipping may not be combined with a coupon unless stated otherwise.

View Shipping Info

Text JOIN to 91256 and get $10 Off Your Next $50+ Order.

* By providing your number above, you agree to receive recurring autodialed marketing text msgs (e.g. cart reminders) to the mobile number used at opt-in from Pyramyd Air on 91256. Reply with birthday MM/DD/YYYY to verify legal age of 18+ in order to receive texts. Consent is not a condition of purchase. Msg frequency may vary. Msg & data rates may apply. Reply HELP for help and STOP to cancel. See Terms and Conditions & Privacy Policy.