Page 2 - UTG 11mm-to-Weaver Adapter, Vertical Scope Reviews

Very easy to attach to my rifle. I feel very confident that the "stop pin" will give stability to my mounting system.

would not change anything for this mounting

Nice item. Looks and works fine. Great price considering.

Nothing.

Mine worked really well on my 1077. I plan to use my second one on my QB78 Beeman. Fits fine on both. If you think it's not worth the money, go into your shop and try to make one. Just kidding, I know some guys have the ability. Better to throw $10 at the issue in my world.

PRICE ! Mounted on my Talon / Condor great alternitive to airforces unit that sells for 38.00.Works just as good for less dough. Makes bipod installation simple and strong.

Nothing , perfect.

Worked as intended, well made.

Nothing

Mounted on Sam Yang 45 with a 3x9 Bug Buster. It gives you extra room for eye relief adjustment.

I needed an adapter to go from the dovetail rail on my rifle to the Weaver rings on my scope. This item fit the bill. It is easy to mount and extends to the rear just enough for me to mount the Bug Buster scope to my Daisey Avanti 853C.

I would make it a little longer so it can cross over the breach of the 853C and grip both dovetail sections of the rifle rail.

This works great, is made very well and solves the problem It was designed for.

Nice solid mount that allows me to use different rings instead of standard 3/8 dovetail rings. Price was very nice and shipping was fast.

Very good price and well made. It worked and my scope is mounted and seems very solid.

None

For the price it is a good product and works well and that is all you can ask for a simple product like this.

Compact and relatively cheap.

Too flimsy for my Bone Collector.

2-screw will not hold. Stop pin is too small, and bent over and eroded the hole in my receiver. Might be O.K. for a low shock rifle.

Holds well, brought the scope back

Nothing

Works great, didn't need the other extension

Nothing

What you need to mount the smaller scopes or to get the scope closer

Nice size, fits on my Crosman 2240 with steel breech. Scope was added with ease. The step increments on the bracket allows more adjustments.

nothing

needed this adaptor for installing my scope on my Crosman 2240. Make sure you have added the longer breech for install.

Attaches to dovetail well and does what it needs to do. The additional screw thru the center (perpendicular to the bore) could be useful it keeping it tight on the mount. Sufficient space for mounting what you want to.

If there was a way to make this thinner so as to minimize raising your optics, I would do that.

I do not like adapters. This raised my red dot so high it would promote bad shooting habits unless you like that sort of thing. If you have to raise your head/cheek to look thru a sight, it's not a good thing. Guys get those mounts where you can adjust your scope for long shots and look thru the under side of the scope thru the mounts for open sight shots. Well, I haven't seen anyone with those kinds of mounts drive tacks like someone with a regular mount can and I've seen and taught a lot of shooters. Overall, I would recommend getting a sight that fits without this device. However, it works fantastically for it's intended use to mount something on.

Well build and easy to use.

Nothing

I would recommend this product for air gun use.

Design is fine

Needs a center lockdown screw for the dove tail, this would not hole on a Hatsan 25 supercharger pistol

Works fine if gun used on is not a magnum springer

Ease of installation. Solid.

Nothing

Serves muy purposes for my Crosman 1377.

This is one of the most useful products around I have at least eight of them.Not only will it allow you to mount a weaver type scope to your gun it also raises the sight a bit off the barrel and makes it easier to put on and sight in without using up the max. WIN/Elev.You'll still have room to make further ajustments.

Nothing it works as it should,Mabey make it a tad longer and higher one could always cut it if needed.

It's just a good add on that really works and is bare bones simple.

It works. I like it.

Nothing.

This piece seems to be molded or extruded rather than machined. So, the leftmost and rightmost "points" are a little bit rounded rather than coming to a sharp point. I found that the less expensive red dot scopes have mounts are are not so carefully made either. Sometimes, if the scope or sight mount is not near perfect, the attachment can come loose. So, just be careful when you mount whatever it is that you put on here and make sure that the clamps fit fully over those points and that they are tight.

A great way to extend the length of an 11mm rail, while changing the mount to Weaver. I recently purchased a Baikal IZH-61 pellet rifle from Pyramyd. It has a fairly small 11mm rail. This inexpensive adapter provides a solid base to attach any number of red dot or full scopes on the rifle.

nothing

Perfect. Clamps securely. Just long enough for a 32mm scope.

Nothing.

Use Picatinny (thru-bolt) rings - 4-screw advised.

Everything" I have at least 10 of them.Now days almost every Red Dot and Laser scope are Weaver mounts and this item helps a lot.

Nothing" It is a perfect simple attachment.

A very basic product.