Page 8 - UTG 11mm-to-Weaver Adapter, Vertical Scope Reviews

Great for a wider choice of scopes and a more secure mounting of scope.than 11mm type mounts.Great price and very well made .

Nothing' great piece of equip.

No it,s a graet standard mount thats worth every cent.

Fit perfectly and it's solid.

Nothing. It's great as it is!

If you have to adapt a weaver scope mount to an 11mm mount this is what you need.

Good price. Sturdy construction.

NOTHING

This is what you need to mount the LEAPERS BUG BUSTER SCOPES. The 4x or 6x or the 3-9x32. I got the 6x and the 3-9 BUG BUSTERS mounted on my MM tuned B26's. Mount it backwards to get the proper eye relief on these very short scopes, works like a charm everytime.

Rock solid, heavy duty Allen set screws. Once your scope is locked into place it is not going anywhere.

Nothing

This is the one piece of equipment an airgunner has to have if he is thinking about mounting a scope of any sort.

This mount is soild! Much more than expected for the price.

Nothing

Highly recommended

Good, tight fit with stop screw. Cut-away groove down middle of rail. Worked perfectly for my Nightstalker TK to add the third Weaver rail. Also allowed better placement and eye-relief for my scope.

Nothing.

Works great, good buy.

It sits square, mounts up solid, and fits a 3/8" dovetail.

I would make the extended portion of the mount just a bit thicker, to minimize any chance of flex if you use the last slot to mount a scope ring.

The extended portion of the mount is thinner than I would like. If you push down on it with your thumb, it can flex a thousanth of an inch or so. If you use the two extreme slots, you will have a 3.125" ring center. One thousanth of an inch flex with these centers will give you an impact deviation of 0.3" at 25 yards. This might make a difference to the precision airgunners, but not me. As long as you don't use the extended portion, it is ROCK SOLID ANYWAY.

The mount is well-made, leaving little to be desired in a straight 11mm to weaver type of mount

I would like a mount that compensates for the droop in the break barrel pellet rifles, like the Leaper mounts for the RWS rifles.

This is easy to mount and I especially liked the fact that the rear section could be used to put the scope back further.... closer to the eye.

Fits fine, has a stop pin, and does what it advertised. Great value for the money.

Add a third bracket screw and a better quality finish. Though it has two screws that hold secure, a third would add more security. The finish is okay, when you stare at the sides of the rails, you can see the finish isn't great.

Price and the quality was very good. mounts prefect on a IZH 94. comes with extra shoes.

Not a darn thing it is very simple and it works.

Quality construction and price

Nothing

Fit perfectly on my Crosman 2300S

Very solid design, super steady mount

Nothing

I was able to mount this on top of the 459-MT mounts on a Crosman 1377 in order to mount a more potent scope. That may sound like overkill for a pump pistol but that's neither here nor there. What is important is that this is a VERY solid mount for Weaver accessories.

i was very pleased with the mount. everything fit great. very satisfied with the product. theron linton

nothing

Excellent mount. I needed to mount a Bug Buster scope on an IZH-61 and this allowed that to happen. I couldn't have done it without it. This is a good sturdy mount and with the base length plus the two screws I have not had one micron of scope creep.

Nothing

This mount allows a scope to be more forward on the gun but it could also be reversed if your scope is too far away and make it closer to you. On my IZH-61 the rear screw is actually hanging over the rear of the gun rail but it doesn't matter because of the long base and the two screws together still hold the base really tight.

This mount woked well for a short, folding stock air rifle, I wanted to put a red dot sight on. It did what I needed and then some.

I would have put a center screw on the clamp, for recoil resistance

Great mount for rifles with a short dove-tail groove cut into the action. Especially older guns. Sturdy and well consructed.

Maybe a third screw in the middle for extra holding power. Perhaps a second stop pin on the other end of the rail so it could be turned backwards for a closer eye-relief.

Not sure, but the locking clamp might be reversible to accomadate a 3/8" dove-tail. I like the fact that the Pic/Weav rail remains at about the 100 mm length like most other mounts,...just the clamp is shorter.