Page 2 - UTG Scope Mount Base, Fits Reviews

El modelo es perfecto en sí, se ajusta al rifle que adquiri que es el Diana 350 Magnum y el valor precio es perfecto, este articulo lo recomiendo.

This base seems well built. It was easy to mount. I have shot 2-3 hundred round using the base and works well. I'm getting 3 shot groups at 25 yards that I can cover with a dime.

nothing

I have a RWS 34 and shooting Crosman supreme pellets, 10.5 grains. The gun really seems to like this pellet.

Fixed the barrel droop problem on my 10 year old Diana 34. Excellent design. Absolutely solid after several hundred shots. I hadn't even heard of barrel droop until I replaced my old 3-9X Daisy scope (which had zeroed just fine) with a new Hawke Air Max. At first I thought I must have a defective scope but a little searching revealed the true problem.

The 20.7 inch drop compensation on this model is more than needed for my Diana 34 as my Hawke scope now zeros at close to the minimum elevation. The black finish had flaked off on a small region. Otherwise 5 stars.

I matched this with low mount Leapers Space Age rings which work great. The base is fairly high and the low mount rings gave my Hawke 4-12x40 scope plenty of clearance without having to remove the factory sight.

Just the Mount I needed for my Pellet Gun

EASY INSTALLATION, worked out good on my old rws 45 which is 30 wears old and still shootin fine! Dont know why Iwaited so long to add a scope to it.

The front tang needed to be filed a little to fit the bulge in front of the 11mm rail which came on the model 45.

The thing that I like most.....I didn't have to use it!! No droop on my rifle. However I did install it, and that was a breeze. Great design, reasonably priced.

Nada

There is also a mount from UTG that does NOT compensate for barrel droop (item # :LEMNT-DNTOWL[PY-A-2639]), so like me, that may be the one that you need.

Rock solid base. Very well manufactured. It not only has a lip on the front that you can see in the picture, but also a stop pin in the rear in order to help with the second springer recoil.

Nada

I bought the medium rings to go with it, but feel they are too high. If I had to do it over again I'd definitely use the low rings. I have a 40mm scope and it sits way up high. Other reviews said that there was some obstruction that made the medium rings necessary, but now that I have it installed I can not understand what they are referring to.

Nice Sturdy Mount for Diana Air Rifles. Barrel angle adjustment is excellent. Put this mount on my RWS Model 36 and the fit was perfect.

I just wanted to add to the review I posted earlier. I thought that a shorter mount would be best for this set up "I was wrong". In most cases having the scope mounted as close to the barrel as you can is the best set up , but not in this case. Putting a real low set of rings on this mount over compensates the barrel angle. Instead of not having enough up elevation in the scope now you don't have enough down elevation adjustment. I would recommended the UTG Premium rings Medium in Weaver mount. The UTC Premium Low rings I ordered work but the Medium rings would leave a little more elevation adjustment in the scope .

Nice sturdy mount for Diana Air Rifles. Barrel angle adjustment is excellent. Put the mount on my RWS model 36 and the fit was perfect. Mount stays put and doesn't move. The mount does make up for the barrel angle on my model 36

I wish they could make the mount a little shorter and not quite so tall.

I ordered the mount with a set of accushot low profile weaver rings. They were advertised as low but when they showed up they were Medium. If you have a 44mm obj scope or less you need low rings because the base is to high. I have a RWS 450 40mm objective scope and when mounted on the base and rings the center of the objective is almost two inches high. When sighting in at 16 or 20 yards this makes for a real step trajectory over the line of sight. You need the lowest mounts possible that your scope can handle and still have clearance over the power plant housing to get the line of sight and pellet trajectory with in reason. For some people this makes no difference, but to me personally, I have been hunting for 34 yrs with Rifle and air gun and to me having a flatter trajectory leaves less guess work in the field.

This mount fits perfectly and locks up tight. Its canted forward at the exact angle to give your scope back some much needed height adjustment.

Easy to mount, nice fit, does what it's designed to do. I tried mounting a scope on this rifle years ago and gave up getting it sighted in. Then the rear sight spring came out and I was just shooting it using guestimation which worked but wasn't consistent. This mount and a scope put it right in the black every time. This rifle is now usable.

nothing

Easy solution to mounting a scope to a Diana RWS 34.

This mount is super solid! Made to fit perfectly on my 34p rws.

nothing

If you have a model that these mounts are made for they are well worth the money.

Setup was easy. Worked like a charm.

Nothing.

Get the Weaver mounts to match scope diameter. Have original RWS scope and took awhile to find tube diameter. Other than that, setup and zeroing in was fast.

it's solid

can't think of anything

this, and LOW rings make it high enough for my 4-16x50. my 34 has really impressed me with this setup.

Great mounts! Easy to install and rock solid with the UTG rings.

Make it a little lower in height if possible.

Way too much compensation for an RWS 350 (mine anyway). I was out of scope adjustment and still 6" too high at 20 yards. I tried an old 2 piece mount as a test and was able to zero with no problem. Apparently my 350 has little or no droop. I am going to exchange the mount for the non-droop version.

Works just as advertised. I use it on my Diana 34 with great success. Really allows for full use of scope adjustments. Don't have to max out elevation anymore! Looks great too. I use it with low rings and its perfect.

Nothing. Works great, looks great. Get it.

Do yourself a favor and get this if you have a diana airgun with barrel droop issues. It saves time and makes life much easier. Also when I disassemble my gun I can leave this on, doesn't get in the way of my obsessive tuning. I used locktite on the screws and haven't thought about it since installation.

I was putting shots in the black rings of an NRA Official 25 Foot Air Rifle Target at 90 feet within 10 minutes of installing this mount. I'm using the standard scope that comes with the RWS 34 combo. I'm very pleased with this purchase and I wish I had bought it sooner.

Nothing.

This base perfectly adjusted for droop in my model 34. It seems well made and did not cost to much.

It would be nice if it was shorter so the scope could be mounted lower. I am using low rings but it is still rather high although useable. I may look for some super lo rings.

Nicely machined. The Weaver mount style prevents ring walk.

Like others have expressed, my mount placed shots over an inch to the right at 30 yards. This could not be adjusted by the scope.

Whats not to Like???This was the end-all answer to my nightmare of C-Mounts (bought three-killed three). In less than 5 minutes i had it mounted, scope zeroed at 25 Yds and tearing Jagged Single Holes with my RWS 48 .22. WHERE HAVE YOU BEEN ALL MY LIFE??? As an Engineer by trade I can say that this device has it all-Strength, Ease of use, and Value- a WINNER!!!

Not a dad-gum thing!!! Unless it could go back in time and be available about four years ago! :)

Be careful! This mount caused me to twist my ankle- DOING THE HAPPY DANCE!!!!!! Just kidding-well not about the Happy Dance...