Page 4 - UTG Scope Mount Base, Fits Reviews

Easy installation, solid construction great design for the 34

Nada, it would be nice to have some adjustment, But for the money its a great mount.

I was about 10 inches [] at 30 yards with my scope adjusted for max elevation. I reset the scope to the center of adjustment and re mounted the scope on the new mount and I was 1/2 inch [] at 30 yards. Lucky maybe. But it works for me!

This mount "fixed" the problem with sheared mount stop screws and finally by Diana 34 is useful with my variable scope. Prior to this I had relegated it to open site use.

Nothing

It accomodates and conforms to just about any gun wih a droop issue. Initially when installed with rings and scope- the scope appears to point straight down to the muzzle. I've had far too many scopes that I just couldn't dial down far enough. In this case with th Leapers droop mount I was dialing up for a change! Very functional, sturdy, good screws.

Nothing. It's a GEM! Wish RWS would've considered the idea aeons ago.

The barrel droop problem has been brought to the RWS table on a multitude of occaisions and fell on deaf ears. Other gun manufacturers as well. That other parties have stepped-up to the plate and produced the idea shows an element of integrity in the air-gunning world. I'm not harping RWS or any other manufacturer for their inability to listen to their clientelle. I'm simply grateful that someone LISTENED! This... IS the option to turn-to where barrel droop is an issue and Paul, I can't thank you enough for the suggestion! It works flawlessly!

Quality craftmanship. Very well made.

Nothing.

I was never happy with the scope mounts that came with my RWS 34. I was so unhappy with them that I took the scope off and shot it with the open sights. After receiving this product, the scope is now a permanent fixture, I love it!

Simple yet effective, well made, inexpensive...

Make an adjustable model...

Use the lowest rings you can find (Item#:RG18W-25L[PY-A-2445]), since this will make your scope sit pretty high (a 50mm scope can fit with low rings). I used a couple of different scopes on this mount and found that some still did need shimming, while others didn't. If you have a scope with limited elevation, you may run out of clicks. If you're have this issue, try different brand scopes. I initially used this base with a 3-9x40 and 4-16x40 centerpoint and ran out of clicks (was still 1" high at 20 yards). I then tried a leapers and a bushnell and didn't have any issues. Other than that, this is an excellent, economical solution...

Easy installation

Nothing

It worked perfectly on my 34. I had a one peice mount and with all of the elevation i was 6 inches low at 30 yards. I centered the scopes elevation screw and mounted the scope on the base. 1 Shot dead on. I had to adjust about 6 clicks up.

the mount stops your scope from slipping back and it fits very well, good job on that part.

make it adjustable somehow

the base made my panther 34 shoot to high over compenfate the barrel droop. had to shim my scope anyway to correct the p.o.i.

Every thing, it works as advertised ,easy installation ,easy sight in scope stays put !

Nothing !

Leapers got it right !

I am a machinist by trade so I can appriciate the workmanship put into this product. The mount fits like a glove and looks good. Excellent design!!

For what it is, I wouldn't change a thing. The majority of RWS springers will greatly benifit from this mount.

Not all RWS models have the amount of barrel droop that this mount compensates for. This mount didn't work for my particular gun (model 34) because it over compensated. I use a Leupold straight 6x for optics and a Beeman one piece mount. With this setup I shot about 12" low at 30 yards and had to use most of my elevation upwards adjustment to correct it. With the new Leapers mount, Weaver rings and the same scope, I shot about 30" high at 30 yards but didn't have enough downwards elevation adjustment in the scope to get any closer than 6" high at 30 yards. I hope that Leapers will produce this mount with a variety elevation compensations to compliment the design. A recommendation would be in 6" increments. I know this would be challenging to keep the costs down, but I think they would still sell alot of them because people like myself would probably buy a full set of them in order to keep the scope running as close to optically centered as possible. Plus it would be alot of fun trying different combinations of scopes, rings, and pellets.

Everything this mount is ROCK SOLID and solves all probs with my 350 mag.Thanks to this mount i now own one MEAN and VERY ACCURATE springer

NOTHING

I have it on a RWS 350 mag with MED rings

Brianag618; Very interesting design and idea. Fits well and very easy to install. Does exactly what it was designed to do.

To the product it self nothing, needs to be included when you buy an RWS Rifle.

Before you switch out your existing scope and use this device, I strongly advice, if you have a Laser Scope to make sure it is sighted in correctly, it will make adjusting and sighting in your scope using this device very easy, if not get one and save your self a lot of time sighting in your scope. Also sugggest that you buy a New Set of Leapers Scope Mounts, Leapers # LPS-RG18W-25L. These are Low Profile mounts and come with a Knub on the bottom of the mount that LOCKS into the Weaver Rail Slots of the New Scope Mount, also preventing the Scope from Shifting. Do not be surprised if after mounting your scope on this New Mount, that you will have to Lower your adjusting knob to its lowest point, to start resighting in your scope. If you take your time and set this New Mount up correctly you will be very happy with the results, it will also help shooting at longer ranges, because it changes your elavation settings, but may give you a problem if trying to shoot at less then 20 yrds, do to your scope being bottomed out, to make up for shooting at the longer ranges. Does help with groups once you get use to using it. Who ever helped design this mount, did a great job.