AirForce Extra Air Tank, Air or Nitrogen, Hi-Flo Valve, for Condors

This is the standard 'quick connect' spin on tank. It must be removed from gun to fill. I got two of these tanks so I could quickly replace empty tank with a full one. Currently using the 'spin lock' tank that came with gun as I'm shooting over the chronograph at my shop. (Where I have the compressor.) I'll switch to the spin on tanks when I go into the field. I have tried them and they work fine.

No pressure gauge to assist filling. Requires fill adapter to attach to pump.

Options for 3000 psi in the field are limited. Two quick connect tanks are a good way to get an extra 15 or 20 shots when you are away from the compressor.

It is good sized and well made.

Drop the cost.

Excellent air bottle. The valving works quite well.

this tank is an upgrade to my talon ss with a .25 cal barrel. With the standard tank, I was getting about 870fps on #12 on the power wheel. after install the striker weight with this tank, I backed the power wheel to #4 and I am currently getting 950 fps out of my talon ss. Yes, the muzzle report does "crack" but...the energy is through the roof in a pellet gun. Point of impact at 950 fps has not changed and I should a 3 shot group at 30 yards and all 3 pellets touched. ONLY drew back compared to the standard flow tank is the high power shot count. The tank was topped out prior to testing at 3000psi. After through 3 shots through the chronoy, 4 shots on target and 1 test to see if the pellet will penetrate an empty 1 lb propane tank (It does, standard tank will not)for an 8 total shots, psi dropped down to 2500psi. I throws a lot of air.

This is not an issue with Pyramyd Air but I waited 3 months on back order for this tank. Not a big issue but....

Great upgrade especially if you have the talon ss. Buy this, the air force striker weight and an 18" .25 cal. air force barrel and you will have an extremely powerful pellet gun. I will do more testing with the power wheel to see what FPS this gun will do. Stay tuned.

Handy for Quick change for longer shooting time with out stopping to pump up a single bottle.

none

not at this time

The extreme flow capacity. Holy smokes does this puppy make them sizzle. Unbeatable quality and craftsmanship you've come to expect from Airforce products.

Nothing

Buy it NOW! Get the striker weight too! You won't regret this upgrade.

I purchased the above tank on 18th sept 2012 as per order no. 3597326 because my first air tank was leaking and since Pryramyd Air and Airforce refused to replace it. This is my second air tank and that is also leaking. Now I have two leaky air tanks. I am from India. Both the companies please note this.

First one ordered leaked and valve popped at 2700 psi when filling. 2nd One is working great.

Don't like the new shoulder style. AF should sell DIY Tank conversion kits that include all the parts and wrench necessary to convert Standard Tanks to Hi-Flo.

Don't forget to by the striker weight from AF or the Hi-Flo tank won't work on Talon & Talon SS.

adjustable butt-plate ring around the body of tank. foam on tank keeps cheek comfortable.

add a regulator so you can see how much is in tank. you can count your shots, but considering its practically on every other pcp gun, AirForce should consider adding them to their guns.

Works fine on my Talon (with hammer weight). Provided just the velocity that I wanted with kodiaks with the 18" barrel. Easily tuned up to a 32 shot bell curve with 35 fps spread at 180 bar. Average mv 950 fps.

The AF butt pad is just not right.....bad ergonomics. Never fits the shoulder right. Same problem with all AF tanks.

Just right on a .22 Talon as long as you use kodiaks. Lighter pellets are too fast with this tank. Does not go supersonic with medium weight pellets. Does not blow through air as bad as expected as long as you tune the rifle right.