Globe Front Sight & Inserts, Fits Weihrauch & Beeman HW Air Rifles

Exactly what I needed for my Beeman R7. And it was an exact fit. Very happy with it.

Nothing

By with confidence is a quality product.

Bought to replace my old Berman R10 sight if the same type. Nice target sight, especially when combined with a good aperture sight. Plenty of easy to change blades for different uses to choose from. Good sight of this type for the money.

Fine as it is. Even more sight blade choices would be nice. Optional or standard if the quality is kept.

Best with good aperture sights, I believe. Less useful with standard open sights, but to each his own.

Metal construction and the extra inserts!

Not loosing my original!

This is the exact sight that comes with Weirauch and German BeeMan Air rifles from the factory!

The overall looks and included accoutrements are impressive.

The extremely soft aluminum cannot be mounted effectively without damaging the sight or the gun. This might fit a gun with a crude 3/8 dovetail, but NOT Weihrauch or FWB.

Spend the money to acquire the CORRECT sight.

It's a functional globe sight

This is very low quality and very overpriced. The soft Aluminum dovetails will fold at the slightest misalignment or during removal. It's junk however there are no better options for HW rifles short of making one yourself.

Very disappointed but stuck using it

Sight fit on the gun with little fuss. A small plastic machinists hammer and my gun was back to new again.

Nothing. Worked as advertised, very pleased with sight.

I worked the sight back and forth in the barrel dovetail one side at a time to smooth the sights dovetail. Then used a small plastic machinists hammer to tap the sight in place. No galling at all on the sights dovetail.

Me gusta que es muy rapido de cambiar, los insertos, es muy buena calidad el material

Que sea mas sencillo de fijar, ya que tuve que abrir con fuerza para adaptar al rifle

Tal vez que se puede cortar un poco para que se pueda abrir mas el riel.

The inserts are great

The material of the front sight itself is too soft. I tried to insert it on the grooves in the muzzle in different ways and the filings got deformed. I will most likely return the product.

Perhaps there is a specific way of inserting the sight that I do not know about. A shame really, since my HW90 is a delight to shoot with open sights.

My rifle is an older HW30 that had the fixed front sight post globe sight. The option of different front sight posts appealed to me.

Should be easier to install.

I could not install the front sight on the barrel using a "push fit." Using excess force would have damaged it. I noticed there is a slot machined longitudinally in the bottom that does does not carry all the way through the sight. I had to file the end of the sight to carry the slot all the way through-this allowed me to install the unit on the barrel. I'm not sure if this is a manufacturing defect, but I made it work. I had to raise the rear sight quite a bit to get back on zero at the ranges I shoot at.

it seems to be aluminum with only the dial part that opens being steel

specify which hw this fits on!!!

I couldn't get this onto my HW95, return and or exchange with PA were NOT a pleasure, VERY FRUSTRATING I don't know if I got a bad one or not, or if it just doesn't fit, I would be be very hesitant to order this for a HW95...