TenPoint HP Aluminum Bushing, .297", 12 Pack

After the 2023 archery season I decided to change my nocks to lighted nocks. I purchased ten point alpha blaze nocks and .297 inner diameter, which you require for my evo x 16” bolts and the lighted nocks. I didn’t need the inserts as my evo x bolts already had them, exactly the same as the ones I purchased. I didn’t check anything on the inserts except they matched what you said to use. I read that the lighted nocks would be tight so I installed them on 6 bolts. I was concerned how tight they actually were but I figured you knew what you were doing. Boy was I wrong. I took my crossbow to check the scope. Out of 6 lighted nocks not one worked, all too tight to move in or out. I was only able to save one out of six. I started to check the specs on the inserts and the nocks. NOT EVEN CLOSE TO WHAT THEY ARE SUPPOSED TO BE. The inserts I bought are .260, not .297 I. D. as stated. The lighted nocks are .266. The inserts on my bolts are .260. I drilled the insert out to about .265 and the one lighted nock I was able to save now fits and works just as it is supposed to. NOT TOO TIGHT, NOT TOO LOOSE. I shot to 15 times and it never came close to falling out. I can easily pull it out to turn off the light without tools, just like you advertise. You really need to stop selling products that don’t perform as advertised. This was entirely too much work to get lighted nocks. I will never recommend Ten Point products to anyone.

The updated aluminum bushing for the alpha nock is horrible. The original slotted style was too loose-I had to glue in every nock to thr plastic insert. With the “improved” aluminum bushing the nocks will not fit! I have to remove quite a bit of material with emery cloth before the nock will fit in the bushing!

Bushing glues in place perfect the alignment is accurate

Had another archer hit my bolt and ruined the nock and insert, drilled it out and replaced it. Easy enough for the average person.

Probably the best most accurate nock I've used. The stability it gives to an arrow in flite is unmatched.

I was breaking nocks on my Nitro X due to the power of the bow. Made the switch to the new HP and problem solved.

I bought these to change some of my old carbon arrows over into Alpha Nocks. It is a must that you measure the inside of your carbon arrow for these to properly work. Once installed I had no problem and now my old carbon arrows I can shoot with my invader 400. Very happy with my purchase and if needed will buy these again. I will tell you this 10 point stands behind their product if it’s not right 99.9% of the time they’ll make it right. I’m happy to do business with them.

Easy to install after getting the old alpha nock out. Much more durable. I bought them so I could use the new alpha blaze but they are months late being available.

Only usable on Tenpoint bolts. Am dissappointed that they can't be used for any other brand.

Huge improvement from the previous design. Very solid and easy to install.