ENTER DAILY FOR A CHANCE TO WIN
888-262-4867 (GUNS)Deals888-262-4867 (GUNS)Deals1-year limited warranty
Earn 220 Bullseye Bucks
PY-A-4124
$219.95
List Price $229.95 Save $10.00 (4%)
as low as $20/month
Only 3 left in stock
Excluded from coupons
This item is not eligible for coupon discounts
Limited Quantities
This item is not eligible for coupon discounts
other products by AirForce
Unit Converter for Airgun Measurements
Create an online review and share your thoughts with other customers
1.0 1.0
1.0 1.0
Things I liked: This air tank have a good look...
Things I would have changed: air tank received without the protective cap from the valve, yet it is on the picture... So I can not make use of it outside in case of dust entering the valve inlet
What others should know: this air tank is difficult to implement, remove the clips to remove the threaded support for the sinking completely because the valve and pressure gauge prevent the screw and unscrew it quickly and completely (as with the original air tank) then you must return the medium has its place and screw the clip. this air tank is only practical if you filled with the K-valve, but the connection is not provided yet the air tank costs more than $ 200 ...
Show Other ReviewsCreate an online review and share your thoughts with other customers
Got a question? Got an answer?
Log in, then enter your text.
I find it quite weak, did not you?
Airforce has 3-4 levels of power output in valve. The High Output valve for .25 Escape SS is the highest powered. There are also 2 sizes of bottom threads going into the tank. The Customer Service Representatives at Airforce are very knowledgeable best to give them a call for gun info 877-247-4867
No, this is a standard tank designed for .20 cal and up. It has plenty of power.
adjustable valve as it's not hi-flo?, with a 60yard range it has done in how much pressure?
The valve does not adjust, the adjustable power is on the air gun itself.
4.0 4.0
5.0 5.0
See all my reviews
Things I liked: Solves the problem with knowing how much air remains in the tank.
Things I would have changed: The clearance between the gauge and the frame made installation difficult. I was finally able to install the tank but I rubbed the finish off the frame in the process. I have asked Pryamid Air what I can do to protect the frame where the gauge rubbed off the finish. Although I have not yet heard back from them, I am still very pleased with the ability to know just how much air remains in the tank.
What others should know: The problem I had may be a transient quality control problem but I would ask about this before buying.