Roll over image to zoom in
1-year limited warranty
Earn 50 Bullseye Bucks
List Price $54.99 Save $5.00 (9%)
Only 1 left in stock
Tech Tip: The 9398 sights are made for any HW and Weihrauch made Beeman break barrel rifle that has dovetail grooves on the muzzle end of the barrel (some Beeman rifles just came with muzzle brakes with no provisions for front or rear sights).
Tech Tip: These sights do not have any moving parts in the clamps and are often very tight that they occasionally need to be physically manipulated to get them on to the dovetail on the barrel (i.e. tapped with a hammer. In some cases, folks have filed the sight's clamping points a little to get it on there but normally this would not be necessary.
Never let a lost insert spoil your shooting again! The globe front sight & inserts make it easy to take your shot in any lighting condition. Fits Beeman, HW, and Weihrauch air rifles with a Dovetail groove near the muzzle. Please see tech tips listed above.
other products by Weihrauch
Create an online review and share your thoughts with other customers
Things I liked: The inserts are great
Things I would have changed: The material of the front sight itself is too soft. I tried to insert it on the grooves in the muzzle in different ways and the filings got deformed. I will most likely return the product.
What others should know: Perhaps there is a specific way of inserting the sight that I do not know about. A shame really, since my HW90 is a delight to shoot with open sights.
Things I liked: My rifle is an older HW30 that had the fixed front sight post globe sight. The option of different front sight posts appealed to me.
Things I would have changed: Should be easier to install.
What others should know: I could not install the front sight on the barrel using a "push fit." Using excess force would have damaged it. I noticed there is a slot machined longitudinally in the bottom that does does not carry all the way through the sight. I had to file the end of the sight to carry the slot all the way through-this allowed me to install the unit on the barrel. I'm not sure if this is a manufacturing defect, but I made it work. I had to raise the rear sight quite a bit to get back on zero at the ranges I shoot at.
Things I liked: it seems to be aluminum with only the dial part that opens being steel
Things I would have changed: specify which hw this fits on!!!
What others should know: I couldn't get this onto my HW95, return and or exchange with PA were NOT a pleasure, VERY FRUSTRATING I don't know if I got a bad one or not, or if it just doesn't fit, I would be be very hesitant to order this for a HW95...
Create an online review and share your thoughts with other customers. Show Other Reviews
What groove width will this sight fit?
It would be nice to know the diameter of this tube.
Will this fit the Air Arms T200?
Only 1 left in stock