Roll over image to zoom in
|Max Velocity||780 fps|
|Muzzle Energy||19.8 ft/lbs|
|Front Sight||Adjustable for elevation|
|Rear Sight||Adjustable for windage & elevation|
|Scopeable||Weaver & 11mm dovetails|
|Suggested for||Small game hunting/plinking|
|Max Shots per Fill||25|
|Cylinder Size||50 cc|
and share your thoughts with other customers
Things I liked: Accuracy Solid construction Removable stock that also has a great deal of configuration flexibility Multishot Picatinny AND dovetail rails Inexpensive magazines and additional airtubes
Things I would have changed: Pay more attention to details! The barrel itself is of great quality, but the crowning job was just done in haste. I was able to recrown the barrel using professional (but expensive) tools in 10 minutes. The accuracy improved quite a bit. Also, most parts were not lubed. You can extend the longevity of this gun by properly selecting and applying lubricants to various parts of the gun. I know the gun has a 1/2x20 UNF barrel, which is great. However, for those of us who want to stay legal and not have a loud gun, Hatsan should consider a version that has a non-removable factory installed shroud. But keep the 1/2x20 UNF threading option available to those who are more, well, adventurous.
What others should know: This gun is heavy as a pistol, but it balances well. As a carbine, it is actually quite light and also well balanced at the same time. To maximize accuracy, use a magnified sight. I was doing okay at 10 yards using a 2-MOA red dot, but at 25 yards, using a magnified scope dramatically improved accuracy. There are lots of mods one can do to this gun. Most, if not all, of these mods will void the warranty. However, these mods can change muzzle energy (tune up or down) and improve the overall efficiency of the gun. My .177 is now shooting at 11 FPE and good for 20 shots with a low extreme spread. That's not bad for a little 50cc air cylinder! Also, the shoulder stock may be both difficult to put in and wiggle at the same time. Put a little bit of Gorilla tape on the stock side, then use a little bit of grease on the pistol side. Mine now slides in with ease and yet with no wiggle from that joint. The dovetail of this gun does NOT work with BKL rings.
Things I liked: Fit and finish were as good as I expected.
Things I would have changed: I wish some manufacturer made a powerful (600+ FPS with 25 grain lead pellet).25 caliber air pistol that was smaller, even if it was only a single shot pistol.
What others should know: The connection between the female air input to the pistol and the male output from the air tank leaked badly. I was not able to overcome the leak and returned the pistol.
Things I liked: The feel of this gun is amazing. The grips are very comfortable. The gun is really accurate, I put a Leapers UTG 3-9x32 CQB Bug Buster Rifle Scope on it and had is sighted in with 4 shots and 15 yards. The cocking action is fun to do because it is different than most guns, the clips are also nice and easy to reload. The gun is a little heavy but I'm putting it in the pro column because the weight is well balanced and feels right.
Things I would have changed: Like everything I ever read about this gun before getting it, it is LOUD. I knew it was one of the louder guns but everything else out shines this fact. I did try to shoot it in my backyard to sight it in, thank goodness it only took 4 rounds to sight in because every shot made me cringe. The weaver rings that I bought for the gun didnt seem to work, they just didnt fit, so I switched to 11mm dove tail and it worked just fine. This gun does leak some air when left sitting for days, not too much but some. The air filling could have been set up better, the air tube needs to have a direct connect to the pump.
What others should know: Overall I purchased this air gun knowing that it was going to be too loud for backyard shooting, which it is, but I enjoy it enough to take it places to shoot, and have transformed my garage into an indoor shooting range, 10 yards, to shoot this gun. So overall it is a great gun to add to my collection, just wish I could shoot it more.
Show Other Reviews and share your thoughts with other customers
What velocity does this air gun shoot 25 caliber 25.4 grain pellets as calculated by a Chronograph?
it should shoot in the high 6 hundred range.
can this be run on co2?
i dont see how you would get c02 into the air cylinder so i'd say no it cant!!!
just bout this guys from you but i have a hand pump for a Benjamin Mrauder... i don't want to bu another pump.. can i get some kind of adapter to switch back and forth?
will have to purchase male quick disconnect for$9.95 will hook-up hatsan fill probe to your pump good luck
Click on the PCP Hookup tab to the right, and it will help you confirm/make the choice on the adapters if any are needed
To fill your PCP gun:
1.Pick a source of air shown at right
2.If an adapter is needed, one will be shown
3.Add both to your cart to get hooked up
Hatsan AT P2 PCP Air Pistol & Shoulder Stock with 1/8" BSPP connector (2M)
To start over click reset
|Max Velocity||780 fps|
|Muzzle Energy||19.8 ft/lbs|