888-262-4867 (GUNS)Deals888-262-4867 (GUNS)DealsCaliber: 0.177" (4.5mm), Stock: Synthetic, Handle: Right, 10rd mag, removable shoulder stock & hard case
1-year limited warranty
Earn 500 Bullseye Bucks
PY-3625-6955
$499.99
List Price $549.99 Save $50.00 (9%)
as low as $44/month
Only 2 left in stock
| Caliber | 0.177" (4.5mm) |
| Max Velocity | 870 fps |
| Muzzle Energy | 14.5 ft/lbs |
| Loudness | 2-Low-Medium |
| Barrel Length | 10.4" |
| Overall Length | 36.0" |
| Shot Capacity | 10 |
| Barrel | Rifled |
| Front Sight | none |
| Rear Sight | none |
| Scopeable | Weaver & 11mm dovetails |
| Trigger | Two-stage adjustable |
| Suggested for | Small game hunting/plinking |
| Action | Sidelever |
| Safety | Manual |
| Powerplant | Pre-charged pneumatic |
| Function | Repeater |
| Max Shots per Fill | 25 |
| Body Type | Rifle |
| Fixed/adj. power | Fixed |
| Weight | 6.6 lbs |
| Cylinder Size | 50 cc |
Create an online review and share your thoughts with other customers
2.0 2.0
2.0 2.0
2.0 2.0
Verified Purchase
Things I liked: Cool looking, trigger grip and tactical grip
What others should know: Sadly this did not meet or exceed expectations that Hatsan has set with its other Airguns. The side cocking mechanism is very rough. It's extremely difficult to fully cock the gun, and often will double feed. I paid for the 10/10 and cannot understand why this was not addressed. Also the FPS is way lower than advertized. About 60fps, not really an issue but Hatsan normally under advertises its FPS. At 10 meters it's fairly accurate but I expected better. This obviously does not represent Hatsans normal standards with their products, BUT this one unfortunately, needs to go back
| By Ken from USA on 2018-05-24 |
|
| By Steven from USA on 2018-05-21 |
|
| By Ken from USA on 2018-05-18 |
|
5.0 5.0
4.0 4.0
4.0 4.0
Things I liked: Everything is what I like! The feel on the grip is excellent, very well balanced, to be able to remove the air silinder makes it much easier to pump. Just looks cool. Plenty of power. The QE works great, very low noise.Highly recommend!
Things I would have changed: If the stock could be removed easier that would be a plus, and have a true weaver rail would be great also.
What others should know: With all the bells and whistles like a flash light, red dot and a laser you will be ready for anything!
Create an online review and share your thoughts with other customers. Show Other Reviews
Got a question? Got an answer?
Log in, then enter your text.
Is there a way to adjust the hammer spring on this pistol?
Can you get the pistol grip in left hand
Do they offer lefty grips for this pistol? Only thing that's held me back on possibly purchasing one
To fill your PCP gun:
1.Pick a source of air shown at right
2.If an adapter is needed, one will be shown
3.Add both to your cart to get hooked up
Hatsan AT P2 Quiet Energy Tact Pistol with 1/8" BSPP connector (2M)
To start over click reset
Tank fill calculator
| Caliber | 0.177" (4.5mm) |
| Max Velocity | 870 fps |
| Muzzle Energy | 14.5 ft/lbs |
| Stock | Synthetic |
| Grip | Right |
| Color | Black |
Only 1 left in stock
Only 5 left in stock
Only 2 left in stock
Only 2 left in stock
Only 3 left in stock
Only 4 left in stock
Only 1 left in stock
Only 5 left in stock
Only 2 left in stock
Only 1 left in stock
Only 5 left in stock
Only 2 left in stock
Only 4 left in stock
Only 1 left in stock
4.0 4.0
5.0 5.0
4.0 4.0
See all my reviews
Verified Purchase
Things I liked: This is one of my favorite guns I own, it looks so pretty with the gold trigger and other bits, and the molded grip and adjustable stock make it extremely comfortable, it's also lightweight. Fairly accurate with the dot sight and I'm able to get quite a few shots with one fill. The power surprised me, I shot a partical board plank with my Marauder pistol in .22 and the pellet embedded halfway through the plank, then I shot the same plank with the AT P2 in .25 and it went straight through the plank, the book behind it and my door. I then learned that this is not an inside gun.
Things I would have changed: The side lever is extremely difficult to operate, I'm hoping it gets easier over time. I like the idea of a combination dovetail and picatinny rail but without it being standard it becomes useless, I find it difficult to mount anything on the picatinny rail so I bought a picatinny to dovetail adapter that seems to work better.
What others should know: If you can't decide between this or the one without the stock, I'd recommend this one it's so big it needs the stock.