Optional accessories shown.
To cock the IZH 46M, move the cocking lever fully as shown. When you've cocked it properly, the bolt assembly on top of the breech will flip up and reveal the loading port for the pellet.
Roll over image to zoom in
IZH-Baikal 46M air pistol
Click the AMMO link to stock up on wadcutter pellets, which are what you shoot in 10-meter matches. Check the ACCESSORIES link for targets and safety gear.
Your gun may be marked with any one of these mfr names: IZH, IZH-Baikal or Baikal. The IZH 46M may be marked as an MP-46M or IZH-46M. There's no difference between these guns. Only the markings are different. They come from the same plant and are manufactured to the same specs. The guns are identical.
The lefthand model has lefthand grips. The trigger is still oriented/slanted for righthanded shooters and cannot be canted to the opposite side for lefthanded shooters. Buy our LH trigger by searching for AV-IZH46MTA or Air Venturi IZH 46M Upgraded....
|Max Velocity||500 fps|
|Cocking Effort||18 lbs.|
|Rear Sight||Adjustable for windage & elevation|
|Trigger Pull||1.1 lbs|
Create an online review and share your thoughts with other customers
Things I liked: This is an extremely accurate target pistol. I have not chronographed any pellets yet, but around 500 fps seems reasonable. I've tried several pellets ranging from Daisy wadcutters through RWS R10's light and heavy. Best accuracy so far has been with RWS Diablo Basics followed by Champions Choice Competition (4.50 mm head). I've shot a few of the lighter JSB and H&N match pellets, and Crosman HP and Crosman pointed pellets. The Crosman pointed hunting pellets do very well for the price. I installed an Air Venturi scope mount and a Bushnell TRS25 red dot sight to see what the gun can do. Shooting off a bag at 50 feet, even with my 60 year old eyes, I'm shooting 3/8" five shot groups with the RWS Diablo Basics and a little larger with the Champions Choice Competition. Even the Crosman pointed hunting shoot 5 in less than a 1/2" at 50 ft. At 75 feet, the RWS Diablo Basics are shooting 5 shot groups around 1/2" but print 3/4" low for a 50 foot zero. I have the trigger set at 4 oz's.
Things I would have changed: Nothing on the gun. It would be nice if extra grips were available as I would like to fit a set to my hand, but don't want to carve on the only set I have.
What others should know: Gun comes with a spare set of seals, cleaning rod, combo disassembly tool, pin punch, and varying width front sights. Schematic and disassembly instructions are a little sparse in the documentation. Two sets of instructions are provided (one from IZH and the second from Air Venturi). No safety on the gun either. Trigger is canted to the right for a right-handed shooter. Pyramid offers a trigger upgrade that will help left- handed guys. It would be vary easy to accidentally discharge the gun as the trigger can be set so light, so would not advise handing it loaded to another shooter. It can be dry fired too. Mine came with beech grips and appear to be oil finished. Rear sight can be removed and flipped over to get a more narrow rear notch.
Things I liked: Very accurate. It is pretty easy to pump, comparing to Beeman P-17. Th grip is big, but when shooting single-handed, it is very stable. The trigger is very light and crisp. The sights are good too, easy to adjust.
Things I would have changed: There is something loose on grip. When I grasp the grip and shake the pistol, you can feel the frame is loose somehow, not attached to the grip tightly. I tried to tight the screws on the grip, but they are tight indeed, so I don't know where to adjust.
What others should know: This is the replacement pistol from PyramydAir. The first one came leaking air. I could shoot around 8-10 rounds normally, then next 2-3 rounds after I pumped, I could hear hissing noise from the little hole behind the barrel, obviously the air was leaking out, then the speed of the pellet was much lower. Then everything would back to normal for another 8-10 rounds, and the circle again. So even this pistol has overall good quality, there is still possibility to get a lemon. But PyramydAir has a very good customer service, I received the shipping label to send the leaking one back and got the replacement one back within several days. Overall it was a good purchase.
Things I liked: 1st time I ever had a factory trigger setting, I did not want to improve. Awsome trig with all typical match grade adjustments.
Things I would have changed: nada
What others should know: I tried it @ 10M of a rest, just one ragged hole centered to ring without touching sights! Barrel not even broken in yet! Recommend when storing to NOT lock down bolt, so you do not unnecessarily keep 0 ring compressed. Wipe off outside with a little Synthetic oil just a drop on 0 ring, don't clean barrel, maybe after 5,000 shots, then only pull thru with a dab of synthetic Hoppes to not damage seals, DO NOT DAMAGE this hammer forged, lapped barrel. Bargain Bargain Bargain. A Lifetime Keeper, with the pox on IZH now, there will be no more.
Create an online review and share your thoughts with other customers. Show Other Reviews
I am looking to purchase a precision air pistol, but would like to be able to put a heavy trigger on it (on the order of #3.5) to keep it in line with my bullseye pistols. How heavy can this trigger be adjusted?
Loading up this trigger defeats the purpose of this pistol. its not a bullseye pistol it is for 10m match. if you're trying to emulate your 1911 or 38 super with this gun you will be disappointed. 2 different animals. a better choice would be the Weihrauch HW 75 or the Gamo compact target pistol imho.
The specifications say 3.9 to 9.8 Newtons, or roughly 0.9 to 2.2 pounds.
It is adjustable. Getting up to the 3.5# mark should not be too hard. I would imagine that would be well within the range of adjustment
|Max Velocity||500 fps|