Page 6 - Air Venturi Nomad II 4500 Reviews

I like that it's quieter than my other compressor that's water cooled, it's a little slower than my water cooled to me that's good ( my other pumps so fast I wonder if the cut off switch will cut off in time) & it's portable as to where my other is not.

a little longer fill hose

all good

Quiet, slow and steady and ready to use with auto shut down

shipping company FEDEX SUCKS

Fedex damaged mine and tried to hide that fact by not delivering it ,finally got ahold of them and received 4 days late. Never did hear back from pyramidair and its been a month now

Works as described. Good quality. Just right for my needs.

Nothing

This unit is very portable and functional. Very easy to operate. The carrying case is great and very helpful in transporting the unit. The dials and power buttons are clearly intuitive. Satisfactorily meet the high pressure air filling need for my airguns.

Should come with silicone oil.

Worth the investment!

Waited three months to get this.Used to mainly top off air cylinder around 30 times.The compressor stopped working, One would think a 7 hundred dollar compressor would last longer. It's just a expensive paper weight. I called PA tech support and get a no tech is available. I call Air Venturi and get a no tech is available. I just want to know where to send it to get it fixed so i can use it a few more times before it stops working again.

Maybe make this compressor last longer then 19 days !

You might want to consider a compressor other then this one

Portable; not terribly loud; small foot print; can use in the field if vehicle is near to run off vehicle battery

Oiling port to be located on top rather than side for easier oiling; eliminate the underneath blue light or relocate to the side of the unit (useless where located currently)

This unit works on 110 but I have heard some people trip their home breakers sometimes. I am not sure unless the amperage on their outlet cannot handle the load. This unit after using it for nearly 20 fills has worked as advertised. I see the many reviews that it works great for a while then fails. I do not know the issues individually as they do not re-post those to let others know. But PA has been doing right by these I hear on failures. I would add a secondary filter system to double the ability to pull water/condensation from the fills of your rifles or pistols since this is a direct fill unit. Just follow the directions of the unit and you are good and covered. One more note......if you stop the pump and try to re-engage it to finish a fill you could from what I read blow the fuse and even the control module board. Be sure to go through the steps when you get your air rifle filled to bleed off the line. Good news is, PA carries the control board for replacement.

Nothing , It's loud, shakes too much when operating and can't fill my gun past 180 bar.

make it work

I got the new Hatsan Piledriver air rifle. It's rated to 300 bar. At the time Pramyd Air had this compressor listed as a recommended accessory, under the listing for the gun on their site. I even had a chat session with one of their "experts" before including it on my order.
It can't fill it past 180 BAR. The instructions for the compressor say not to charge anything over 200 BAR either. I wouldn't have bought it if I knew that. I had to use teflon tape on the 3 side fittings, you could feel the air escaping with your hand even when tightened all the way. Now you can feel the air coming from the guage on top.
I put in a RMA request for this compressor over the weekend, It's Tuesday and I see they already removed it as a recommend accessory but I haven't heard anything about my request yet.

This Product is Better than I Expected an Everything I Hoped, Needed and Wanted it to be!

Larger Padded Pockets to store The Accessories.

If They can Improve Upon This Product...It will be a Long Long Time from Now!

nothing

I would make it charge to what the specs say it does. It's really loud.

It can't charge the rifle past 180 Bar, it's a $700.00 piece of junk. My rifle is rated for 300 Bar and I can only fill it to 180.
If I knew it didn't charge past 200 Bar I wouldn't have bought it in the first place. But I would at least like it to charge to 200.
I only purchased the air venturi compressor because your site recommended it beneath where I put in the order for the rifle. I even had a chat session with one of your "experts" and asked first before buying it. He said it should work fine.
I bought a $1,200.00 rifle from you, not the first purchase I have made with Pyramyd, and now have a $700.00 compressor that can't charge my rifle fully. I did use gas rated teflon tape on the threads of the 3 side fittings because you could feel the air coming from them at first, it wouldn't hardly charge the rifle before that. Now you feel air coming from where the pressure gauge is.
The gauge is faulty as well. It shows 200 when then gauge on rilfe stops at 180.

I just recieved a Hatsan Piledriver 50. and air venturi. It can only fill my Hatsan to 180.

Air pyramid needs to stop recommending this compressor for the Piledriver.

Much faster than a pump. Not nearly as loud as I expected

Nothing to change really

This was one of my best purchases. My collection is up to seven guns now, and that's just too much pumping. A few minutes to pump each gun, and I'm out in the yard shooting.

Quick, simple, reliable auto shutoff, portability, great soft case designed for the unit (fits perfectly).

Nothing, except maybe a horizontal oil dripper (port is on the side of the unit). LOL

This review is based on .177 disco 1,000/2,000 psi at 70 fills, 10 fills on ten yr. old trolling motor battery and 60 fills on 110 volt house current. Average fill time 1 min. 40 sec. for both. Low end is a little different each time as I shoot 25 shots per fill. Load Gage reaches 23 just before unit shuts down. Price is agreeable as I knew exactly what to expect, thanks to staff member Mary for the tip on the oil purchase.

Love it! this works great fills my Hatsan flash in about 3:30 minutes, since this is my first PCP compressor i am glad i went with this instead of wasting money on a hand pump

nothing at all

Just read the manual and watch the videos on You tube so you are full informed on how to operate it and you will be happy.Great carry case perfect for filling a PCP gun, now i will be buying much more PCP rifles, way to go PA!

Well built performs well so far.

Longer battery cord and fill hose.

Keep a record on how may fills you do and keep up on the load indicator and always fill 3 drops of silicone oil in your fill port. And you should have no problem.

Compact - Worked out of the box - Nice carrying case

Should have come with silicone oil.

Pumps my 500cc fx crown bottle from 150 bar to 250 bar in about 7 min.

It's a nice size compressor and I like that it can be setup for 220/110/12 volt power source.

I'd improve the oiling orifice to a reservoir of some sort.

It's a bit loud, but tolerable. Do NOT try to fill big air tanks with it, you'll damage your compressor! I have a Great White 97 Cu. Ft. air tank and I only have it filled at a scuba shop. I use the Nomad II to fill my PCP Air Rifles only.

Very convenient to use. No more hand pumping or tanks. Also it really is not that noisy when running.

Nothing.

Follow maintenance instructions and keep the compressor lubed. After using the Nomad II, I could not go back to hand pumping or an air tank.

Easy to use/maintain.

Make the light were more useful.

I have only purchased in April 2020.

I own 5 PCP air rifles 2 of which are big bore air guzzlers. I started out using the Air Venturi MK 4 by Hill Hand Pump which gets tiring to use during a day of shooting. I purchased the Air Venturi Nomad 1 in 2018 which has and still serves me well. I purchased the Nomad 2 because of its compact all in one case design with a separate power switch and compressor start switch, compared to the less convenient Nomad 1 with its separate power supply. Also when a group of friends and family get together it serves as a 2nd fill source to keep the PCP's topped off.

The Nomad 2 included 1 empty plastic bottle for Silicone oil but no oil included. This puzzled me based on my purchase of the Nomad 1 which included a full bottle of silicone oil. The owners manual states that you should oil accordingly every 3-5 fills with 2-3 drops of silicone oil.This oil should be include as it was with the Nomad 1. I brought this to the attention P/A customer service, It was explained that oil is not included and the compressor is ready to use out of the box. They did promptly send me a bottle of silicone oil as a courtesy. I give customer Service 5 stars.Thanks

If you order the Nomad 2 also order silicone oil, The unit is a little pricey but worth it if you have several or only 1 PCP air guns to fill.

When it works, it works! Tidy little package and quiet. This is a first for me so I have nothing to compare.

This unit seems a bit high-strung, but this is all new to me and may very well reflect operator error. By high-strung I mean something "interesting" happens every time I use it. The most recent being it shutting off when the ammeter hit 20 amps, which is straight away when under load. I opened the bleed valve and let it run for a while at lower amperage and then things worked just fine after that.

Don't forget to bleed the line before disconnecting from the (in my case Flashpup) gun!! Blew an O ring right now....duh