Page 4 - Leapers Accushot 1-Pc Mount w/1" Reviews

I have this on 2 of my spring piston air rifles. Works well, no problems. You get 3 wrenches and extra screws with it.

nothing, worth the $$.

Solid, scope stays where it belongs.

Very solid mount on my Marlin 795 .22 long rifle. Works perfect with the bushnell 3x9x40 scope.

Nothing

Rock solid. Quality. Easy to mount. Extra parts (2 screw sizes and scope top set screw).

Nothing

Mounted this on a HW95 with UTG 3-9x40. Called PA for advice on mount height. Got the medium mounts and the fit is perfect. This is a quality one-piece base and ring set.

Fits perfect

maybe a fourth bolt/nut.. but really nothing

I bought this for my crosman storm xt and it fits great i got a centre point 100 yard scope on it with the one inch optic and its kinda tight to adjust the main yardage on the scope so if you have a 1 inch i would get the high leapers mount but mine still works just kinda tight.

Extremely solid mount for installing a scope on a "springer" airgun, eliminates many possible sources of damage to the scope due to it's one-piece design.

nothing

I had a problem with my scope rings/mounts walking on the dovetail on my Marlin Model 60, semi-automatic 22 rifle. I tried three different sets of rings and all failed. A friend of mine sent me a link for this scope mount. For the money, I thought "Why not?" IT SOLVED MY PROBLEM!!! Since I've had it on my Marlin, I've shot approximately 400 rounds and have not had to re-zero the scope, nor has the mount walked on the dovetail. EXCELLENT product. I would recommend this to anyone that has a semi-automatic 22 with a dovetail.

Maybe put one more set screw for the "just in case" scenario.

more rigid than two piece rings.

Nothing.

Too wide to use with bug buster short scopes.

great mount for the price. sturdy and reliable.

nothing

you wont be disappointed with this mount. stays locked down where you put it.

Solid and clamp up well. ant beat the price

Nothing

The mount is plenty strong, and I'm sure much more stable than two separate rings (that's what I replaced). The recoil stop pin and one-piece design were what I was looking for, and the price made this one my first choice.

Not everyone will care about this, but my Hawke Varmint SF scope is shaped so this mount gave me some problems. On the bottom of the scope, the housing for the windage, elevation, and side-focus knobs sticks down, so that the bottom of the scope is not flat. To make it work, I had to grind off 1/16 of an inch from the flat between the two rings so that there was no contact between the scope and mount. This will only affect you if your scope is shaped like mine -- most should be no problem at all.

This one-piece mount with the recoil stop has greatly increased my confidence in my sighting. I had lots of problems with two different sets of individual rings, and this was an excellent solution.

duel set of lockdown ring screws really keep the scope from shifting... Very light, but also strong to withstand heavy recoil from magnum springer air rifles.

Including shims to elevate scope at the rear ring for break barrel air rifles would be nice. Use better steel for the allen head screws.

Over tightening the ring and base screws can strip the allen hex screw head which appear to be made from soft steel.

great for compact scopes

isn't about time for inexpesive quick release?

I bought these because the RWS 1 piece rings were too long for my 2x7x32 scope

Seems be of good quality , will be awaiting spring weather to try it out , expecting it to hold solidly .

Mount was a bit too long for my Slavia 630 rails , had to grind a tiny bit off each end of the mount to get a solid fit into the grooves on the barrel

Great mount. Easily installed. Has improved accuracy..

Excellent choice for mounting the Leaper's scopes..

Fits nicely on a Henry 22 and with the long base it won't damage the dovetail. Solid.

Nothing

Thanks to the young lady who took my order, she was dead on target with her info .

Good value and very good quality. 4 nuts per ring is a good feature, too. It works perfect on my RWS Diana LP-8 magnum air pistol. with it, I mounted a good i" tube handgun scope and get much better accuracy than the 5MOA red dot I used before. So far, no scope slipage at all. You just cannot beat this price.

May be add a positive stop on the front side.

Use this product for it is proper for, which is for low to medium velocity air gun. This is not for Magnum air rifle. For my RWS Diana 350 Magnum air rifle, I ordered the UTG mount base with a positive stop (at the front)from PyramydAir, then used a pair of tactical ring (6 bolts per ring), plus a Hawke Optic Scope also from PyramydAir. Now, both my RWS 350 magnum and RWS LP-8 works perfect. Thanks, PyramydAir.

Good quality, solid build and good value for the money. It works great on may RWS L8 air pistol with very solid lock, absolutely no slip. But I will not use this one on my RWS 350 Magnum air rifle, it is a differemt beast.

No change needed. It serves great for its intended purpose, a good product for low to medium velocity air rifle of pistol.

Not for Magnum air rifle like the RWS 350, for those beast, you will need a mounting base adaptor with a positive stop, and a pair of beefy rings with powerful lockdow nut and six ring nuts on each ring. at least that is what I have on my RWS 350 magnum.

ordered because of quality and a fair price. I have another one-piece mount from pyramd and it worked great. On a Gamo 640 carbine no movement. Ordered regular ground and received it one day earlier than the scheduled delivery.

Nothing. Great products and great service.

On my Gamo I had to carefully drill a small hole for the stop pin.

Quality you get for the price. If it breaks no problem.... just get another one. I can get almost 4 of these for the price of one of the more expensive models.

Nothing really

Solid mount. Mounted on 2 of my springers. Work great.

The unit is well built and attached quickly to my Henry 22LR. It was easy to zero my Millet Red Dot using this product.

Works great on a 22LR