Page 5 - Leapers Accushot 1-Pc Mount w/1" Reviews

Stays put!

For the money, you can't ask for any better. If it's not broken don't try and fix it.

Just buy it.

Excellent product suitable for both air and rimfire rifles -solid construction - some type of case hardened screws - I have 1,000 rounds through my air rifle with the new mount with no movement of scopr or loose mounts

nothing

It STOPS having to re-tighten your scope every 500 rounds

Great product. Holds securely.

NONE

Very well built, extremely inexpensive...works like a firm rock on my RWS 48 holding a Leapers 3-9x32 with no scope creep.

nothing

Buy Mortimer, buy

Bought this mount for a Marlin 60 because standard two piece rings will not stay in place. Worked great and would recommend to any Marlin 60 owner that is having trouble with his scope moving.

This is a well made product and for the money is much stronger than other mounts I have purchased in the past, you have that feeling this mount could be tightened with a impact wrench.

In my case everything worked out very well and fit like a glove with no flaws, and trust me I,m a firm believer in Murphy's law.

When ordering make sure you pick the mounts that are high enough to clear your scope over the gun barrel or excisting rear sights you may have.

very solid mount. seems very good quality. I mounted it on my wife's Marlin .22 since I couldn't find any decent "rimfire" scope mounts

make it in the U.S.A.

Great mount. Bolts are not flimsy. VERY rugged mount.

Nothing.

Use blue loctite only on the bottom bolts. The top scope mount bolts holds fine without it.

Rock solid, screws do not strip when tightened. Shorter length allows moving all the way forward on RWS 48 to allow scope to be moved forward for proper eye relief without hitting mounts. Four ring screws on each ring. Price is great. Would give six stars if barrel droop compensation was built in.

Offer a steel version. Build in some compensation for barrel droop so the scope rings don't have to be shimmed. Add a fourth screw on the base for added staying power on magnum spring guns. Add additional set pin holes in base to allow set pin to be used on popular rifles when mount is centered, moved all the way forward as well as in the default position. Default position did not work on my RWS 48 since scope hit the mount before proper eye relief was achieved when moving scope forward.

This mount was used on an RWS 48 and was selected due to its lower height and shorter length. The lower height allows scopes to be mounted closer to the bore which is always better since your head does not have to be pulled up off the stock in an awkward position in order to see through the scope. Close your eyes when shouldering the rifle, find a comfortable position on the stock with your cheek solidly on the stock and your head slightly forward. Open your eyes, if you have to raise your head to see through the scope the mount is too high. The shorter lenghth allows the scope to be moved forward enough to achieved proper eye relief. You should not have to move your head to the rear to get a perfectly clear, round sight picture in the scope. This mount will allow use of 40mm scopes with an AO and an overall max diameter of app 48mm when used on the RWS 48. Airgunners: do yourself a huge favor if you are not familiar with proper scope mounting techniques and go to a local gunsmith or reputable gun store and shoulder a rifle with a properly mounted scope. I am shocked at many of the rediculous mounts offered for airguns and the apparent lack of knowledge as to how to mount scopes. I recently bought an RWS combination package with the rifle and an RWS 4x32 scope and mount. The mount was so high it was unusable and the crosshairs broke in the scope after 10 shots. You would think the RWS folks would know which mount would work with their own scope but they are content to package this junk and hope a newcomer will not know any better. I contacted RWS and was told that their "better" scopes all have 30mm tubes and are much better quality. They don't seem to care that only a giraffe could use their mounts unless the scope objective was greater than 60mm.

Well built and solid. The spare screws that are included are a nice bonus.

Nothing

GREAT MOUNT!!!!!

Longer length version with two recoil pins for RWS rails new and old lengths

Leapers swapped mine out as the tolerance stack up between my rifle and the mount did not work togather. I am lucky Leapers is local to me. First mount from their stock fit perfectly. Great customer service from Leapers even on such a low priced product. Guess thats why I do own alot of Leapers made items.

I use this mount to attach a 40mm scope, it keeps the scope close to the barrel, just the way I like it.

I would have made the rind caps more like the B-Square ring caps - but these work as they are.

if you want a 40mm scope to fit close to your barrel - this is the mount to go with.

Fit my gun just perfect. Sold at a great price. Thanks!

I used it on a Marlin 795 22LR rifle. Probably the most secure and sturdiest mount I have ever used. Love the one piece base design.

Nothing

Saw this recommended on the Rim Fire Central site, and got it right away for a Marlin Model 60 project gun in .22LR. Great quality, fair price, lightning fast shipping. Mounted easily, holds the big Mueller APV steady through repeated trips to the range. I now use and recommend this product to all my "rifle rescue" customers with optics on their firearms.

A slightly more rounded appearance would enhance the aesthetics a bit, but that's just one man's opinion. Still a great buy the $$.

Just get one, before prices go up !

Extra screws..

Not a thing..

This is my 2nd Accushot 1-piece mount. Put it on my .22Mag pistol and it solved any & all "walking" problems. The first mount is still on my Ruger Blackhawk & which hasn't moved at all..I wrote a review on that one months ago...Buy this mount--it's worth it!!!

Well made, comes with all needed hardware including extra screws, good value. I will use the three I have ordered to mount scopes on my Marlin 22, Model 60, rifles. One of the few products to keep the scope from "walking" off the dovetail.

Nothing

I received my merchandise in rapid fashion. No delays at all and I liked the way I could track my order during shipping. I ordered the second time due to excellent service I received on the first order.

Rock solid mount. Stays where you put it, even w/o stop pin. My gun has no stop pin hole. Like the size of the screws that hold the mount on to the dovetail.

Not a dam thing

If you have no hole in the comp tube for a stop pin. Don't worry. this mount will not creep.

It totally secured my scope on my rifle. I had originally had twin mounts (cheezy things from the local Wal-Mart) and after every couple shots (and this is on a pellet rifle!), the scope would slide out of the setting. With this mount, those problems are gone forever. Set once and forget it.

Nothing.

Rock solid mounting to a dovetail, Great fit and finish.

Not a thing.

Do not hesitate to install one of these units. Beats 2 piece mounts hands down.