Page 4 - UTG Drooper Scope Rail, 11mm-to-Weaver Reviews

Well made, solid with a nice finish. High end appearance. Does what it's supposed to do.

Offer in different degrees of droop correction. I used it in conjunction with Burris Signature rings with offset inserts to get the total amount of droop correction needed for my Gamo Bone Collector.

Works we'll on my Hatsan BT65 Elite.Gave me the added rise that I needed.

4 tightening bolts is a little overkill and has to be placed perfect to fit all slots in uniform.

Works best on Weaer rails.

Very nicely made, no issues whatsoever.

Nothing

WELL MADE

nothing

I tried a different mount at first, but found I needed one that compensates for droop, this mount does. I put this on my Diana 56 and it has not moved or come loose. I shoot almost everyday, and I've put around 1500rounds thru it.

Perfect for shallow cut rails . I love this adapter for the FWB330S and the DIANA 75 10 METER GUNS

NOTHING

I prefer the weave rings

Fixed my problem.

As a new air gunner I had no clue about barrel droop. I bought a .25 cal Hatsan Torpedo to deal with a raccoon issue in an area where I couldn't discharge a firearm. I put a cheap scope on it, but was 5" low at 25 yards, with the vertical adjusted all the way up. I did a little research and mounted a Leapers UTG 3-9x40 AO True Hunter, on this Drooper Rail. Dead nuts, now. The only problem is that those damned raccoons have migrated and all I've been able to shoot are old CDs, beer cans, paper targets, old computer mice and keyboards, etc. I had no clue how much fun I would have with that. I've put several hundred pellets through the gun with this set up and zero is still zero. Anyway, if you're having an issue of being turned all the way up, and still shooting way low, this guy will fix the issue, while providing a rock solid base for your scope.

Worked as advertised.

Nothing.

I have used this product twice. Once on an RWS 350 with low mounts and again on a Gamo Little Cat with low mounts. Had to grind the front top of the mount to get the Bugbuster scope to fit.on the Gamo. This product works as advertised and has not moved on either gun.

Good Quality

The heavy duty construction (solid aluminum piece), extra mount screw and stop pins. Sometimes pieces get lost, so it says something when the company throws in extras just in case.. :)

Nothing at this point.

I bought this in case I had barrel droop on my Whisper Fusion .22 rifle. Apparently it doesn't have any BUT..that being said I have plenty of scope distance left over for longer range shooting (over 25 yards). Currently with this mount and a UTG 4-16x44 AO SWAT AccuShot Rifle Scope, EZ-TAP, Illuminated Mil-Dot Reticle, 1/4 MOA, 30mm Tube (which has 9 mil dots in each direction), I am shooting 6 mils hold under at 25 yards with Crosman Premier 14.3 gr. hollow points. I certainly won't complain about that!

Great piece for mounting a scope to the airking 54.

Nothing

This is an excellent product for curing barrel droop. I've been out of the gun scene for about thirty years. I own a Sheridan air rifle from that time and it's a tack driver but I looked at the new air products and purchased a break barrel rifle. Everyone likes to think that their rifle won't have barrel droop and I was one of them. The truth is that most of the break barrels have some sort of droop. After purchasing this adapter with the droop compensater it took care of the problem. If you're concerned about droop, don't be, It will be an afterthought. I installed it, sighted in my scope and haven't thought about it since. Great product. Would recommend this to anyone with barrel droop problems.

I would add more stop pin adjustments.

Great product, don't hesitate to purchase one.

Have two of these, one on my Crossman Fury and another on my RWS48. Both brought sighting the scope within 1 1/2" correction for center which keeps my scopes within a safe adjustment range. Have learned from experience that overcorrection on the scope adjustments will only result in problems holding zero or trashing the scope entirely. Very will made for the price and does the job.

Nothing

I've read that mounting your scope is not "Rocket Science" but taking a little time to correctly mount and keep the scope adjustments in the middle range off optical center will pay off. This mount can save you headaches and money replacing scopes.

For the price it is a solid piece of machine work. Sets well within the dovetail and allows a solid and secure placement of a weaver/pic tinny based scope or accessory

I would add an arrow to the product to indicate which end points forward. The unit by design tilts ever so slightly down to compensate for droop. If you put on backwards (yes I did that) you defeat the benefits of the droop compensator.

If you have not encountered the term or effects of droop, check it out in Air Gun Academy on the web and YouTube. Just knowing what droop is and what causes it allowed me to find a product to compensate for it. Accuracy is now up and frustration is now way down.

The only reason I bought this is my Leapers UTG scope didn't fit the dovetail mount of my Walther Terrus. It seems very rugged and well built and mounted easily to my rifle.

Nothing comes to mind.

Really this adapter is for a scope that doesn't fit the standard dovetail mount. It would be a good idea to talk with the Pyramid techs if you buy a new rifle to see if your scope will 'fit' your rifle. Mine didn't. The techs were very helpful though in working this out.

Had a problem mounting a new Scope on my Crossman Fury using the standard rings that came with the scope. Found I had to make an extreme adjustment to the elevation which caused the reticle to float and would not hold zero. Frustrated, I contacted Customer Support at Pyramyd Air and spoke to a very knowledgeable representative who suggested this Drooper Mount. After installing this mount I was able to readjust elevation to a more midrange position. Now the scope is zeroed at 20yds and holding perfectly. Thanks Pyramyd!

Nothing.

Barrel Droop is a problem in many Break Barrels. If you have to make extreme adjustments to the scopes elevation out of the box consider the Droop Compensator mount.

This mount works just like it was supposed to. I didn't have any more up adjustment left in the scope so I bought this mount to get more up adjustment. Now I have almost centered the scope back to it's center adjustment. With the added height of the mount I went from high rings down to low rings and that put the scope at the height that I wanted.

I would not change anything.

Very nicely finished machining and surface treatment. The two vertical threaded rail pin holes lined up perfectly on the RWS 34 P 11mm rail. The 4 pinch bolts provide rock-solid locking of the adapter to the rail in conjunction with the stop pins.

Nothing needs to be changed. Perhaps some consideration to a couple of different iterations of droop compensation? That is likely problematic in that one doesn't necessarily know the degree of compensation needed until one mounts the scope. It could, perhaps be limited to minimal and maximal? Just a passing thought as I had to also shim the rear scope mount even with the droop compensating rail.

Set up requires some light fingered finesse. One has to back up the vertical stop pins and then loosen the four clamp bolts and set the adapter on the 11mm rail, then softly crowd the clamping rail to the 11mm dovetail but allow the adapter to move on the dovetail. One then seeks to screw down the vertical stop pin by small degrees so one can ascertain when it finds the drilled well for it to slip into. For and aft movement will be limited when the pin is in the hole and centered. One then can draw down the four clamping bolts and follow up by bottoming the threaded stop pins in the wells on the dovetail. I used blue Loctite on one screw at a time once I centered the adapter on the rail. So I would not lose the adjustment.

Quality product! Fixed my problem!

Nothing

This fixed my issue with my Gamo Varmint Hunter HP!!!!

Works great does not move.Just the right amount of droop.

When u use this item b sure to order low profile rings. It sits quit high. I use a 56mm bell scope and it leaves about 1/4" from top of gun.the medium rings leave around 1/2" space and the scope sits way to high. You will have a problem with your head position and cheek rest with the medium rings in combination with this item. "ORDER LOW RINGS"

Well machined adapter that precisely fit the 11mm scope rail of the RWS 34-P. The adapter is secure with four (4) clamping screws on the full length clamping wedge and two vertical stop pins. The Picatinny rail top was precisely machined as well.

Nothing.

It is a good idea of use Blue Loctite on all the fasteners once one gets the rail in place. I was very careful to make sure that the stop pins were precisely into the holes in the 11mm rail before setting the clamping screws. Lightly snugging the clamping screws, but allowing the rail to slide slightly allows one to know when the stop pins are captured by the rail holes. Once located, the clamping screws can be tightened and then the stop pins run home. Thus properly and carefully placed, the adapter does not move at all