1" Quick-Detach Rings, Medium, Weaver/Picatinny, See-Thru, Law-Enforcement Grade

Scope rings worked great, great price.

Quick disconnect

Great for lights

The guick release feature! Once adjusted properly these are rock solid.

Nothing, these well made solid rings worked perfectly.

I added these rings with the Universal Dovetail to Picatinny/Weaver Adapter to change my Gamo Swarm Maxxim to the Picatinny/Weaver system. This combination works awesome, I'm very pleased with the results. I needed my scope mounted farther back because of the RRR rail system on my Maxxim for better eye relief. I added the rail mentioned above with these rings to the existing RRR rail already on my Maxxim which made the height of my scope perfect with no obstruction from the Swarm feature in the view. Very pleased with the result and with UTG products.

The whole reason I bought these rings was to quickly and easily remove my scope without effecting the settings when I mounted the scope back on to my rifle. I have a high end light and laser set mounted to my scope and can not put the rifle in my gun case with the scope mounted to the rifle. These rings were perfect and solved the problem I had. They are high quality rings that stay in place and hold my scope settings even after time after time of removing the scope. The scope rings also hold the scope in place even after a full day of firing the rifle. They look great and work perfect. I highly recommend these scope rings for anyone looking for rings that perform the way these scope rings do.

I have nothing negative to say about these rings and there is nothing I would change about them.

I guess I should mention the rifle I mounted these rings on and the scope mounted in them. The rifle is a Benjamin Trail NP XL 1100 .22 cal. Air Rifle and the scope is a Leapers 5th Gen 3-9X40 Full Size AO Mil-dot RGB Scope. I have an UltraFire high intensity flashlight and a red/green LaserScope Laser mounted on a NcStar Scope Mount Adaptor with Dual Weaver Rails. Great set up and allows me to use it for small game hunting in almost any outdoor conditions, and now with the addition of the UTG quick detach rings my set up is complete. My compliments to UTG and the great products that they make.

Typical UTG. Well made and a great value for the money.

Nothing.

Overall appearance, even finish, lightweight

Improve strength of threaded metal because three screws failed to tighten on threads.

Follow tightening sequence detailed in instructions. Do not over tighten.

The cam-locks tighten the bases directly over the upper and lower clamping "points." There is no strain over the center, thinnest part of the moveable clamping piece, as with standard style bases. The inclusion of a slippery material between cams and the clamp surface allows the levers to move very smoothly, so you can clearly 'feel' the degree of tightness and adjust them accordingly.

Not a thing, they are great rings.

I purchased these to replace the original rings that came with my Leaper scope. These were the standard style of mounts, with bolts through the thinnest part of the base between the clamping surfaces of the moveable clamp. After repeatedly re-tightening the mounting bolts of the originals on the Weaver rail, the moveable clamps cracked in two under recoil of my Trail NP.

Makes it simple to swap different scopes to the same rifle with minimal to no change of zero. So far no issues with scope of ring slippage. I will buy another set when the time comes

Nothing.

Always check the zero after the swap. In most cases no further scope adjustment will be neccesary.

Holds the scope very firmly and holds a zero even after repeated re-attachments. Easy to take off and re-attach. What's to not like?

Can't think of anything at the moment

I actually got these rings to use on my .223 chambered AR-15 which has an A3 flat-top upper receiver and they work great. I can now easily switch back and forth between my 3-9x scope and 1x tactical red-dot sight quickly and easily.

For the performance and convenience, I can't see how anyone can say that $20 is expensive. Seems like a great value to me.

Quick mounting and not likely to strip. A great improvement over the Center Point !" rings @ $12.95 which are prone to strip the mounting bolt..

I think it is a tad pricey at $19.97