BKL 3/8" or 11mm Dovetail to Weaver Cantilever Adapter, 4" Long, Matte Black

Easy to install and set up. This seems very strong and well made. Came with needed allen wrench.

Provide dimension of the bottom rail size for others that may need to do similar set ups. I was able to discern it would fit based on the Weaver size dimension.

Have fun and be safe!

Very nice looking, GREAT solid construction. Fit perfectly onto my BSA R-10 Worth the cost for the quality of this mount.

Maybe make one longer in back of mounting area to add other accessories in back.

I would recommend this over most all other mounts for fit and centering of mount to barrel center. Don't look anymore for a mount that is just OK this is the answer. Better then most all others. Take it from me & to the BANK!

Solid component. Works well. Does what is expected.

Nothing.

Very well built. I was so impressed with the design, finish and fit on my air pistol. I play to purchase another BKL mount to replace a mount on another rifle.

Nothing could make this better. It's perfect!

I would recommend BKL products to friends at my local gun club.

The unit is very stout and sturdy. Its size makes it suitable for mounting on dovetails where limited space is available. It comes complete with instructions and wrenches.

It was purchased for mounting on a IZH-61 rifle, but the mount base would not flex enough to tighten securely to the rifle's 11mm dovetail. The mount should be made with one side loose to be tightened down against any 11mm dovetail.

The above problem was solved by forming a shim from 36ga aluminum sheet. The adapter then fit snugly on the rifle's dovetail, and was then able to be tightened securely with the supplied wrench.

Well made and easy to install

nothing

This was a must on my 1974 Sheridan Blue Streak that came with a 3/8" dovetail. It makes the scope quite adjustable for eye relief and for easy loading.

Quality mount!! I own another style by BKL and they just make great products!

Nothing.

If you want quality and are willing to pay a little more.... then this is your mount!

Very solid. Light weight and very very well built....

Nothing...you get every thing you pay for....OK, yes I would like it to have been a little cheaper. But it is worth every penny!

I'm using it on my Beeman P1 .20cal pistol. I first bought the cheaper UTG 11mm-to-Weaver Adapter for $ 9.99 which will work just fine...but because I wanted the scope to sit as level as possible, and back further on my pistol, I bought the $38.00 BKL 3/8" or 11mm Dovetail to Weaver Cantilever Adapter, 4" Long. To get it to mount on the P1 you need to screw the spreader screws all the way in. You will be happier if you own a P1 using this adaptor..see pics

Good price - Very tight fit on rail of air gun. Hold red dot well. Great improvement on stock block sites on Browning 800 Mag.

Options for longer interface base to 11mm rail.

Needed to spread before I could tighten. This function is built in to the design

it works great to make a small dovetail to a longer weaver rail i also like the one piece design it fit great i put it on my drozd mp-661k it looks cool and is nice and tight just the right length for a red dot sight and it seems to made nice and strong

nothing