Leapers 30mm Rings, Medium, Weaver Mount, See-Thru

The price is great! I mounted a scope easily. The rings seemed high quality. I'm confident my scope is mounted well with these rings.

Nothing!

Nice quality at a great price.

solid quality mounts

nothing

Have a weaver style mount and a 30mm scope, buy these. You won't be disappointed! Have them on all my air rifles from LCS Air Arms to FX Dreamline and Air Force models.

Good price, quality, seem strong. Took 1 star because the measurement on the saddle height of this mount is not correct/useable, causing me to order wrong mount!! Triple check for correct saddle height measurement points!

Size and fit!! The diagrams shown (U T G ) do not accurately show " saddle height " in the diagrams it appears the saddle height is from the bottom of scope ( which is correct ) to the bottom of the groove of the picintany. This is NOT correct. The U T G " medium " mount spec.says " 14 mm saddle hight , does not use the groove , but measures from the bottom of scope to the TOP of the rail.The diagram on the box of the U T G 30 mm picatinny/weaver rings shows saddle height measurement to the bottom of the groove! Again this is not correct.The "medium profile" rings measure 20 mm from bottom of scope to groove on pic./weaver mount! Will call customer service @ PA.

I am trying to lower my Leeapers 4-16X44 on Hatsan AT44 long QE . My scope came with mounts that are the same mounts that I just received! The saddle height needs to be clarified. It is not correct/or clear, IT SHOULD BE.

Great product. Well made, and right price.

scope fits great and these rings are well made,scope does not move

4 screw caps , see thru rings, light weight aluminum, price compared to alternatives.

Leapers, instead of the single bolt mount to rail, have a model with two screws. a more stronger, secure mount.

I purchased these rings for a Savage 93 17HMR. A while back, I mounted a BSA 6-24x 44 SF 30mm scope with this style ring in low height profile, worked great, 44mm scope low enough for caps to clear barrel. That's a long scope with a sun shade, and sometime along the way, the Leapers front base bolt broke. I saved that scope for a future project, and ordered an Aeron 8-32x50 SF 30mm mil dot scope, 14"long. Ordered these rings, but to my surprise, the 50mm scope , with the (e) low rings cleared the barrel by 1/8". I used parts from the new to fix the older mounts. You want to keep your scope as low as possible to the bore center to center under 1.5". But now I don't trust these mounts, Wheeler torqued at 25in/lbs. I may order the Max strength cam lock low rings sold here at Pyramyd. Air, they look more secure/heavy duty/ stronger.

Very good Quality

Nothing

sturdy and well built

these are well built but should not be over torgued because of the aluminum threads (25 in lbs) and should be retorgued after the first couple of shoots. due to the tap because it can shift and lossen up again.

Nice price. Solid built.

none

can't beat the price for a solid mount.

Perfect fit and installed in less than 5 minutes

Nothing

IF you have a 30 mm scope with AO these are the mounts you need to permit the front of the scope to clear the receiver if you are direct mounting it to a rifle with weaver. Grooves idled in the receiver.