*Contest ends Sept 15th, 2021 11:59 PM EST. Limit one entry per person. Limited free targets, while supplies last.
$599.99List Price $699.99Save $100.00 (14%)
1-year limited warranty
Walther Reign UXT .22 Caliber
|Max Velocity||975 fps|
Walther Reign Air Rifle
German powerhouse Walther releases a bullpup made to rule over them all, the Reign! The Reign offers a shooting experience fit for a king. Available in .22 or .25 caliber, this bullpup is perfect for the hunter on the move, or the target shooter at the bench. Stylish looks and functional enhancements make this bullpup a sure winner, and all at very attractive price point.
Fill the onboard cylinder to the 3,300 PSI max fill pressure and you'll enjoy up to 60 shots in .22 and up to 40 shots in .25. The all weather polymer stock handles like a dream, and is fully ambidextrous.
The auto indexing magazines can be loaded from either side of the rifle, and if you prefer, the cocking lever can also be swapped from the right to the left side as well. Ensuring good ergonomics, the cocking lever is located just above the trigger for seamless operation.
Walther Reign UXT .22 Caliber
|Max Velocity||975 fps|
|Max Velocity||975 fps|
|Suggested for||Small game hunting/plinking|
|Max Shots per Fill||60|
Create an online review
I have two of them, both in 22 caliber. One was purchased from Pyramid Arms and the other from another owner, who had removed the existing moderator. Both air rifles also had modified trigger springs and adjustments were made to the trigger pull. Once the trigger spring is replaced with of a ballpoint pen one, you will have a proper two stage trigger, and the other adjustments detailed in the instruction manual will leave you with a very nice hunting trigger. The pull weight is approximately 1.5 lbs, and is exceptionally smooth for a bullpup design. I also added Boom Mat in both of these air rifles for deadening the recoil impulse heard and felt in the stock. Boom Mat works very well in that regard. Boom mat was placed in the areas in front of and in back of the magazine insert, as well as the two open spaces in the lower rifle stock. The rifles are now very, very quiet with addition of a Donny FL Koi.Things I would have changed:
Aesthetically and sonically, I would like a shorter, shrouded barrel.What others should know:
The moderators were removed from both of the new ones (heat the cone and twist the can off. Then use a wrench to loosen the cone until it can be fully unscrewed. This way the moderator is not damaged and can be reused. The magazines are easy to use and cycle the rounds perfectly. I have been using H&N 18.1 grain Barracudas and accuracy is 1/2" out 30 meters. A heavy pellet is required for this air rifle. My chrono showed 960 fps with 37 flbs. I do like the design, balance and handling of the Walther Reign. Once the noise and trigger issues are resolved, it is a pleasure to use and highly accurate. Kudos to both Umarex and Pyramid Arms.
Love the guy, I was missing a extra magazine The box was openThings I would have changed:
I wish the suppresor was removable for more OptionsWhat others should know:
Great gun- very accurate , wish suppresor was Removable for more optional suppresors
Super accurate, good shot count within the sweet spot. IMO the best psp out there in this price range.Things I would have changed:
Removeable moderator is a must. Honestly I preferred the look of the original model with the removeable moderator and the barrel shroud. Not a big fan of the pencil barrel at all. Bring that style back, add another inch or two to the barrel length and add an adjustable buttstock for length of pull and this little bullpup will take over the market. Honestly I'd buy another .22 in a minute and add the .25 to the fleet instantly if these changes ever get made.What others should know:
Just remember the price point and what your buying. If you want a dual regulated pcp with all the bells and whistles,..buy an FX for 2k,...if you want a heck of good rifle for the $$$ this one is hard to beat
Got a question or answer?
Can you put a regulator on this and if so maybe the ninja regulator?
Hello fellow airgunners. My question is does anyone know or can measure the transfer port (TP) diameter and length? I estimate the diameter to be 0.130" +/-0.015", which can be improved upon. In General: a bigger TP gives more power, but less shot count, or more wasted air, and vice versa until you get to the Vena Cava, which is the point of diminishing returns. Thanks
what must be done to put a scope on this pikatinny rail ?? the scope i bought is the Hawk 1 inch,,, the mount is the RWS with adjustable up/down,, but the mount wont fit the gun,,, now what ?
To fill your PCP gun:
1.Pick a source of air shown at right
2.If an adapter is needed, one will be shown
3.Add both to your cart to get hooked up
Walther Reign UXT PCP Bullpup Air Rifle with quick-disconnect connector (1M)
To start over click reset
Out of Stock
Estimated in-stock date 07-27-21
Get FREE shipping on qualifying orders!
Any order $150+ with a shipping address in the contiguous US
will receive the option for free ground shipping during checkout.
Certain restrictions apply.
Free shipping may not be combined with a coupon unless stated otherwise.
View Shipping Info
We work hard to get all orders placed by 12 pm EST out the door within 24 hours on weekdays
because we know how excited you are to receive your order.
Weekends and holiday shipping times will vary.
During busy holidays, we step our efforts to ship all orders as fast as possible, but you may experience an additional 1-2 day delay before your order ships. This may also happen if you change your order during processing.
View Shipping Times
It's important to know that due to state and local laws, there are certain restrictions for various products.
It's up to you to research and comply with the laws in your state, county, and city.
If you live in a state or city where air guns are treated as firearms you may be able to take advantage of our FFL special program.
U.S. federal law requires that all airsoft guns are sold with a 1/4-inch blaze orange muzzle or an orange flash hider to avoid the guns being mistaken for firearms.
View Shipping Restrictions
We have a team of expert technicians and a complete repair shop that are able to service a large variety of brands/models of airguns.
Additionally, we are a factory-authorized repair/warranty station for popular brands such as
Air Arms, Air Venturi, Crosman, Diana, Seneca, and Weihrauch airguns.
Our experts also offer exclusive 10-for-$10 Test and 20-for-$20 Service, which evaluates your air gun prior to leaving our warehouse. You'll be able to add these services as you place your order.
View Service Info
Shop and purchase with confidence knowing that all of our air guns (except airsoft) are protected
by a minimum 1-year manufacturer's warranty from the date of purchase unless otherwise noted on the product page.
A warranty is provided by each manufacturer to ensure that your product is free of defect in both materials and workmanship.
View Warranty Details
Didn't get what you wanted or have a problem? We've got you covered!
Return any item in new condition along with its original packaging and any accessories
that might have come with your air gun and receive a full product refund within 60 days of purchase
or, if you'd prefer, exchange for another product.
Our customer service team can help determine the best course of action and provide you with some options in the event you're interested in an exchange.
Learn About Returns
Join the Pyramyd Air mailing list: Our e-mails are filled with new products, deals, sneak peeks, tips and tricks, contests and more - sign up today!
Airgun safety is no accident. You must be 18 years or older to buy any air gun or air rifle in our store.
Text JOIN to 91256 and get $10 Off Your Next $50+ Order.