Roll over image to zoom in
1-year limited warranty
List Price $29.99, Orig.Price $24.99 Save $5.00 (20%)
Need a replacement probe for your FX, Evanix, Kral Arms, or Hatsan airgun? Get the right one.
Create an online review and share your thoughts with other customers
Things I liked: It was wonderful
What others should know: I worked the way it should.
Things I liked: Fits Hatsan Vortex Air Rams on all my 135's QE and the older ones and Torpedo 155. Tuning w/ air. At a 160bar you can kill a coyote w/ the .30cal or shoot 100yr targets easy. Every correspondence w/ Hatsan gives a diff bar rating. Ive heard 130, 140, 150. All responses from Hatsan, so i guess it depends on which rep answer your emails. Ive heard guys swear up and down its 140 or 150. 1 new 1 came w/ 130, 1 came w/ 140, a refurbished 1 came w/ 150. Fact. Ill say over 165bar aint worth it. I tried 175. Its too much. Breaks forearm bolts on stock w/ a few shots. I keep 1 .30cal at 160bar for varmit dispatch. I dont shoot it much except to keep it zeroed. 1 at a 140bar, its really easy to cock and shoot all day having fun. No wear and tear. 1 at 150bar just because its a happy medium and...why not. Just as accurate at 160bar, the limiting factor is the shooter, trigger. If you only got 1 rifle and shoot alot, dont go over 150bar. All rams leak over time. Hatsans can be topped off, its cool
Things I would have changed: The o-rings were trash.Had to run to auto parts store right off. Get silicon grease too, the oil is too thin and pipe tape. O-rings are #9 = id 7/32 od 11/32.
What others should know: 3 out of my 5 needed the hole for the port ground bigger, or the hole didnt line up. 2 had to be completely disassembled to grind hole. 1 just used a file. 2 also the Ram didnt line up, and if you remove 3rd pin it will rotate some. but 2 of them it was as easy as taking the stock off and boom there it was. W/ the .30cal .50g JSB you can get 40fpe w/ 160bar. About 36fpe at 150bar. 31fpe at 140bar. At 160bar expect ram failure or leak down around 2500 shots, im sure this varies, it pump back up once and i got another 2000 shots. Then went flat and i replaced it. At 140bar i got 5000 shots still going strong. Get similar but lower FPE in .25 and .22. So its really a matter of how much of a hobby is this for ya. These high bar work best w/ the .30. The .22 didnt like over 140 much, the 25g JSB breaks forearm bolts too at 150bar. Torpedo in .25 love 150bar (140 new) at 100yrd targets and crows. 35lb coyotes dont like Hawke ReDots or 7.62mm 50g JSB from 160bar at 40yrds in they skull=quick
Things I liked: This probe did not fit/funtion on my Hatsun Barrage.
Things I would have changed: Stock the correct probe for the Hatsan Barrage.
Create an online review and share your thoughts with other customers. Show Other Reviews
Will this fit the hatsan nova qe
Will this fit a kral puncher pibull
Fits all Kral Arms rifles except Ekinoks and Knight models. Yes.
Will this work with a Hatsan AT P2?
Only 1 left in stock
Only 1 left in stock