Date: 15/7/2020 14:5
0
Airgun Hunting is Legal! Check to see what is allowed in your state ⭢ Check It Out!

Hawke 3-12x40 Airmax 30 Compact SF Riflescope Ill. AMX, 1/10 MRAD, 30mm

4.52 reviews
Hawke 3-12x40 Airmax

Roll over image to zoom in

See 2 customer imagesShare your images

Lifetime limited warranty

PY-A-8967

$379.99

List Price $379.99

Add to Cart

Only 1 left in stock

Estimate Shipping

Excluded from coupons
This item is not eligible for coupon discounts

Add to Compare
Add to Wish list

Questions?
Contact Customer Service:
Call: 888-262-4867

Hawke Airmax 30 Side Focus 3-12x40 IR Scope 

  • Wide Angle optical system ideal for varmint/airgun
  • Lightweight and compact construction – short eye relief
  • 16 layer fully multi-coated optics for exceptional clarity
  • Side focus control for parallax adjustment to infinity
  • 30mm mono-tube chassis for superior strength
  • Glass etched, red-illuminated AMX reticle
  • 6 levels of brightness with off positions in-between
  • 1⁄10 MRAD capped, resettable target turrets
  • Fast focus eyebell and high torque zoom ring
  • Side-focus parallax correction: 10 yds-infinity
  • Field of view: 43.7-10.9 ft. @ 100 yds.
  • Eye relief: 3”
  • Length: 10.9”
  • Weight: 20.8 oz.
  • Waterproof, shockproof, nitrogen purged
  • All-caliber rated
  • Includes: lens cloth, lens covers, 3" sidewheel, CR2032 battery


Built specifically with airgunners in mind, the Hawke Airmax 30 SF Compact 3-12x40 AMX IR is equipped to handle the ballistic traits unique to air-propelled projectiles. Be it a heavy, lead pellet; alloy rounds - even air bolts - Hawke’s Airmax riflescope series is a product of the same rigorous engineering and manufacturing standards that characterize the Hawke Sport Optics’ entire optics lineup. 

This riflescope’s AMX IR glass etched reticle is based on common 10x Mil-Dot spacing and offers multiple aim points. This is especially useful when shooting airguns with parabolic trajectories. Half Mil-Dot spacing on the lower post provides more aim points for long shots.The horizontal bars are calculated at 0.5, 1.5, 2.5, 3.5 and 4.5 mil spacing. Hollow posts are segmented into mil spacing and may be used for bracketing.

If you’re in the market for a high-quality, reliable, versatile optic for your air rifle, look no further than Hawke’s Airmax line of riflescopes. 


Limited Quantities

This item is not eligible for coupon discounts


Item Code: HAWKE-13200 [PY-A-8967]

other products by Hawke Sport Optics

Weight1.25 lbs

other products by Hawke Sport Optics

Average Customer Review

4.5 (2 reviews)
3 star2 star1 star

Create an online review and share your thoughts with other customers

5.0 5.0

5.0 5.0

By Larry from USA on 2020-05-25
See all my reviews
Was this review helpful?
0.00 ratings

Things I liked: This scope is the perfect size for my FX Wildcat. Bullpup rifles are compact for a reason and putting on a standard size scope defeats the bullpup's small design. Under the turret caps are excellent drums (Pyramyd should really include a picture of them) with precise markings and a stationary centering post mark so you know how much adjustment you have dialed in. I have less expensive Hawke scopes I also love but the reticle on this one is so much more sharp and fine. The turret caps spin off quickly unlike other scopes that take forever to remove. The 40mm objective appears every bit as bright as my 50mm Hawkes. The side-focus is so much more usable than objective focus. I can side-focus while looking through the scope unlike my objective focus scopes. The drums have a positive "click" and after using them to center different pellets I observed they make precise and consistent reticle adjustments.

Things I would have changed: Maybe smaller turret drums. Current ones are outstanding in usability and accuracy but seem more appropriate for large target scopes than a compact scope.

What others should know: Hawke support team is excellent with super fast assistance. Get yourself a $35 Wheeler Firearms Accurizing Torque Wrench for use in mounting all scopes. Because of the compact design of this scope the amount of tube, forward and aft, of the turrets available for ring placement is very limited. If you are using this scope on a PCP (low or no recoil) consider using single strap rings. You need to keep the forward ring at least 1/2" away from the turret (I traded several emails with Hawke support to resolve an issue.) I had my front ring very close to the turret and tightened it a bit too much. This caused the side-focus gears to be pinched and not operate properly. I had already purchased BKL double-strap rings so I moved them as far from turret as possible and only tightened the forward top strap, of the forward ring, to 15 inch pounds. The rearward top strap, of the forward ring, I torqued to 10 inch pounds. The scope works great now and I love side-focus. I have included pictures.

 

4.0 4.0

4.0 4.0

By Cheng from USA on 2020-03-19
See all my reviews
Was this review helpful?
0.00 ratings

Verified Purchase

Things I liked: This scope has the heavy duty built and good glass for this price range that's for sure.Glass etched reticle is sharp I like it in black more than the illuminated one but it can be useful in different situation.

Things I would have changed: For this price range and quality scope it should come with at least some kind of good plastic or rubber flip-up scope covers instead of double rubber bands one which most people will not use.

What others should know: Since this is a compact scope and short eye relief I have a little problem with eye relief when mount on my FX Wildcat in .22 cal.even I mounted it all the way back.So I remounted the scope rail backward and it looks good.

Create an online review and share your thoughts with other customers.   Show Other Reviews

Got a question? Got an answer?
Log in, then enter your text.

  • Brandon from USA asked:

    Will this scope hold up to a medium power springer like a B9/HW95?

    • Mark from USA:

      Yes

  • Charles from USA asked:

    which of the Hawke 30 mm SF rifle scopes has an OBJECTIVE bell diameter of 46 mm I don't care what the objective lens diameter is listed as, I need a 46 "" objective bell diam. to fit the front ring of an European claw mount. Thanks

    • Mark from USA:

      Hawke makes scopes with 40-42-44 MM objectives. The 40mm and 42mm will fit for sure. The 44mm may be too large to fit.

  • Nicholas from USA asked:

    what height for mounts on Fx WC .25 Compact?

    • Mark from USA:

      30mm med rings will be fine.

What type of scope base is on your gun? What type of mount do you need? Weaver, Picatinny, 3/8″ or 11mm? Do you need 2-pc mounts or a 1-pc mount? 30mm or 1″? Scope mounts intro (Airgun Academy class)

    Navigation