Target has a kill zone that can be reduced 2x with the attached reducers. The smallest kill zone (0.50") is shown above. The kill zone falls back when you shoot a pellet into it. If a pellet splits, it may not have sufficient energy to knock it back. Shoot the hanging disk to reset the kill zone.
Target shown from the back, where the 2 kill-zone reducers are shown hinged to the target. Use either the larger kill zone that's in the body of the target, or slide down one of the kill-zone reducers.
When you hit the kill zone with a pellet, it flips back and out of the way. Hit the yellow disk hanging below the target face to reset the kill zone.
Roll over image to zoom in
Field target is a fast-growing airgun sport, and this Remington jackrabbit target is a welcome addition. Make sure you have a proper backstop to stop any pellets that miss the target. If the target is hit outside the kill zone, it will not flip back (the target face does not fall, as in traditional pull-to-reset targets). It'll flip back only when you hit the kill zone. Pellets that split on the edge of the kill zone (it happens) may not have enough power to knock back the kill zone and get a point in a field target match.
Most field targets have a string attached to the target to pull it back into position once the kill zone has been hit. But this shoot-to-reset target requires no string and resets when you shoot the reset plate that hangs down.
Shoot-to-reset targets have been used in the U.K. by field target clubs. So, the mechanism is tested and reliable
Field targets will help increase your accuracy. Start off with the largest kill zone, and then use the reducers to challenge yourself as you improve.
Because the target is metal, make sure everyone in the area wears safety glasses. Pellets can ricochet. Be sure to also remove all pets from the area to prevent injury from ricochets.
Greats savings on this item as target may have rust on mechanism.
other products by Crosman
Create an online review and share your thoughts with other customers
Things I liked: Fun little target. The included killzone reducers increase the challenge. Fun to see who can hit the smallest killzone first!
Things I would have changed: It's perfect!
What others should know: Tighten the nut that holds the killzone reducers before shooting!
Things I liked: Works great..great for practice
Things I liked: Nice Target.
Things I would have changed: Shouldn't be rusty in the most critical parts of the target, upon delivery.
What others should know: The first one I received had a balky action because the nuts, spacer, bolt and parts of the paddles arrived rusty. As did the second, free of charge, replacement. And again with the third one! I asked them to not send any more replacements rabbits and instead send an Air Venturi Rat on a Stick. Which did arrive in perfect condition. These rabbit targets are going to require more maintenance and possibly have a shorter lifespan because of the premature corrosion.
Create an online review and share your thoughts with other customers. Show Other Reviews
How tall is each of the remington auto reset's from head to foot?
19.75" x 5.50"