Umarex Gauntlet PCP Rifle Mag, .22 Cal, 10rds

Works as it should.

More metal than plastic.

Nothing else to add.

Function and price

Nothing

Grab you a couple extra mags. I carry a couple with pellets and the others with slugs

Work great nice having spare mags

You don't have to feed pellets one by one

Nothing

Easy to load. Easy to insert into rifle. Good affordable price.

Nothing comes to mind.

Having multiple mags sure makes it easy to keep shooting without having to stop and reload mags.

Works just fine.

Nothing.

Buy at least two extra magazines.

Actual Umarex magazine, not an after-market

Although These are actual Umarex magazines, one out of the two that I ordered does not work properly.

Fits my Origin as expected

Make the loading port more circular, with less overlap between shot positions. The port only needs to be large enough to not require placing the port over each hole with a lot of precision. The way it is just seems to let pocket lint & grit into the mag too easily The numbers would be much nicer if they indicate the number of remaining shots

I think the cover is too loose on these mags, and the spring is unreliable. There's two basic things I always do with one of these mags: bend the end of the spring where it catches on the mag outer housing, so that it's less likely to pop loose & tighten the cover retaining screw so the cover doesn't flop around while loading. If the cover moves too easily, it becomes a bit more likely to accidentally drop the mag

This works perfectly in my marauder .22

Lower cost about $10 would be good.

I have not yet received my gauntlet 2 but I am sure it will work as well as it does in the marauder.

Solid construction. Clearly marked direction of rotation. Excellent pricing. Repairable.

This is a rather simple device, so it works very well. The mechanism is well made with very little to malfunction. It personifies the KISS concept.

I have 8 the .25 cal version of this magazine for my .25 cal Gauntlet 1 and have been very happy with this product. I have only had the need to repair one magazine over the past several years and found that they are easy to repair if you need to do that. One of my mags had a spring that was a little on the 'weak' side to advance the last pellet for firing. I disassembled the magazine and drilled one new anchor hole to allow the spring to wind a tad farther, which allowed the pellet rotation to advance the last pellet with more force. Problem solved. I ordered these 2 magazines in advance of my order for a .22 cal Gauntlet 2, which won't be out until late next month. I have enough confidence in the design to have ordered in advance of my need for the .22 cal version of this item. I think you will find that this is a solid design and do long service.