Benjamin Marauder Woods Walker Air Pistol Kit

Shots well great Triger pull with a clean break

replace the red dot its not a good site for this gun

The red dot site supplied has been a big disappointment. on its lowest setting it still to bright and the dot is so big it hides a 1.5" bull at 25 yards, not worth your time or money.

This is my favorite pistol of my collection. The pistol is awesome, it is very accurate, quiet and I can get at least 40 good shots off of a 3000 psi fill. It never has problems feeding or anything, the trigger is great, it is easy to fill, everything is good about the pistol. The pump works well also.

Don't but the kit, just get the pistol, unless you need a pump too. The stock is long and not too comfortable. The red dot sight on this sort of sucks. the red dot is huge, making it hard to aim at small targets. The pump is good, but most pcpers I know use tanks anyway. Save the money and buy just the pistol unless you also need the pump.

the pistol is great, I would give it 5 stars down the line. the kit is not worth it. Get just the pistol:

https://www.pyramydair.com/product/benjamin-marauder-woods-walker-air-pistol?m=2722

I keep wanting to replace the red dot, but never seem to get around to it. It works, the dot is just big and fuzzy making it hard to aim at small targets because it obscures them. a smaller dot or a crosshair would be so much nicer.

Definitely buy this gun, but as a pistol only. The stock will collect dust. If you need a pump then this is a good deal however.

This is my first PCP airgun. It is accurate & very easy to use. I was concerned about how difficult it might be to pump up but have found it to be completely manageable. I love the fact that I can shoot several magazines full of pellets before needing to recharge. The cami pattern is very well done & the quality of construction is also good.

The stock has a bit of play when installed.

I am thoroughly please with this product & the service I received from Pyramid Air.

Whats not to like. I installed the extended stock, and it was solid. Absolutely no movement. The red dot that came with the package looked really cheap, so I installed a different scope instead. I shot a full magazine, benched rest at 25 yards. 8 shots all in the bullseye .5MOA , using the Crosman Premier 14.3 gr, hollow points that came with the package. It also performed really well using the JSB exact 18.13 gr domed, and H&N 21.14 gr barracuda match; different points of impact, of course. Sweet spot appears to be between 2500 and 1800 pounds with the lease pellet deviation; around 20 shots at the most. Love the trigger. I know you can make lighter, but the factory setting is perfect. Love the 8 shot magazine, its so nice not having to load pellets one at a time.

The red dot is junk. A 2X fixed sight scope would be a better replacement, in my opinion; or include an extra magazine .

Good intoduction to pcp airguns. Small enough to use a hand pump.

This is my first pcp and I love it. I zeroed the thing in less than 2 mags. Very accurate. I hit everything I aim at within 50 yards. Easy to fill with a hand pump. About 20 pumps to top off after 24 shots. Powerful shoots right through 1/2 inch pine plywood at 20 yards.

#1- the pistol grips are bad. They feel like a cheap plastic toy. The supplied butt stock is a good solid replacement but the cheek weld is too low. #2- The spring loaded lens caps keep springing open and will not stay shut. #3- I purchased the RAI adapter for the AR stock but the butt end of the pistol itself is loose and creates a loose connection to the adapter and stock. Bummer.

This is an awesome pistol/carbine. I hope (and expect) there are fixes to my minor issues. The wobbly AR stock interferes with my point of aim (specifically when re-cocking). This gun has been around for a long time and there are a good amount of after market products available. BTW I have not heard of anyone else having this issue with the AR stock. I'm hoping it's an isolated issue and can be remedied. Otherwise I'll have to put the supplied stock back on and I'll be stuck with a useless AR stock, RAI Adapter and Folding Adapter... ugggg.