Fake Silencer for Walther PPK/S

Realistic look from a distance. Screw on to adapt to barrel.

Texture really sucks, the finish is rough and needs better finish like black gloss finish.

Did not make any bit difference regarding guns accuracy. With or without fake suppressor, guns accuracy SUCKS. It's the worst BB gun I got so far. I know I was supposed to give my review on suppressor only, sorry I just can't passed this opportunity. I bought both gun and suppressor from you.

I love this! Finish is excellent. Very realistic. Very well made.

Be careful screwing it on and off. The threads are to fine and change to a thicker thread will be more reliable.

Great Silencer !!!

I love this! 100% cool factor. Finish is excellent. Very realistic. Factory installation is the way to go. They do a professional job at Pyramyd. The metal barrel is a plus.

Threads are real fine, but I think with careful handling, they should be ok.

Have this done by Pyramyd for proper installation. You will not be dissapointed.

Failry easy to install, looks cool attached to the gun.

However the the treading still poses a problem since the blowback does shake the silencer loose eventually, Change the thread to a thicker more reliable thread. Or create a "snap-on" silencer similar to what airsoft guns have available.

Check the silencer after every CO2 bottle to ensure that it is still on and secure, if not, tighten it back on. OR u can buy some low-high strength thread locker at a parts store and that will solve ur problems, just be sure u use low strength or medium strength if u plan on taking the silencer off for whatever reason.

Awesome look and feel. Very well made.

The threads are to fine and may be a little delicate. Be careful screwing it on and off.

Please get this item factory installed from Pyramid. They do a really nice job with the barrel installation.
Do not try to do it yourself!

Full metal, including the replacement metal barrel cage that's included. Fairly easy to install yourself, if you have some kind of background and knowledge in fabrication and mechanics.

A manual for those who might need a couple detailed explainations on how to install the product, although there is a very vague picture "manual" on the back of the packaging that should give you a general idea of what your doing. I dont know if it was my older model of PPK/S or not, but I had some difficultity getting the stock barrel to fit with the rubber "fitter" into the metal cage, far enough to properly sit in the locking position. Took a pair of pliers and a cloth to hold the cage down while I place the pins in to secure it into place.

The diameter of the "barrel" in the silencer is actually a bit larger than the .177" barrel in the gun. Around 3mm to be exact. Not sure yet on how this effects performance, but I can only imagine it only helping the BB fly a little straighter. But it could also hinder your fps since air has more room to expand out and around the BB in the the larger diameter "barrel"....kinda like a real gun...at least dropping the effective range a little bit. :p (Might be useful for those who've full-auto modded their gun)

What I like about this is that it adds barrel length, and increases accuracy a little bit.

If I could change this product, I would make a less finer threading for the barrel connection because the silencer is easily cross-threaded, causing damage to both threading on the silencer and the inner gun barrel.

This silencer can be very easily overtightened. If this happens, attempting to remove it will actually cause you to unscrew the base connector from the silencer outer shaft. I had to unscrew the base adapter of the silencer using a set of pliers with a cloth to keep the pliers from crushing the threaded component. Do not overtighten, but just screw it on until it it stops turning with a slight amount of pressure and you're set.

Looks absolutely awesome! It was very easy to install, especially for someone who is as mechanically challenged as myself.

While it is easy to install, I advise to exercise much care when installing all pieces back to their original places, so as to not encounter problems in the future.

metal, works properly

nothing

if you know what you are doing, meaning can disassemble and put a bb gun back together properly, you can ask them to ship this to you so you can do your own handy work or otherwise you have to ship your bb gun to them to have it installed by their professionals. so if you want to save some time and can handle a little challenge then ASK them to ship it to you because if you dont ask they just sit on your order and wait to receive your bb gun. * this will void your warranty though I will add.

Very nice toy.

I would add an instruction on how to install the silencer. Some parts (included) on the gun need to be change in order to install the silencer.