UTG Accushot 4-16x56 AO, Etched Mil-Dot IR, 1/8 MOA, 30mm

Solid build quality. Locking turrets. Decent glass.

Mil-Dot Reticle & MOA Turrets? Whaat? Why?? What purpose could this possibly serve? I don't know how I overlooked this. I like Mil-Dot, when I saw the reticle was MIL, I actually bought this and a 3-12x. Big mistake. There is only one reason why a company would chose a reticle format that does not match the turret format -- because the tracking consistency is poor and the different formats masks that. Useless. I feel swindled.

Do not buy this. This scope is preying on the uninformed.
Look up MIL vs MOA. Both are fine, however, it is important that your turrets and reticle match. This scope has MIL reticle and MOA turrets.
This means you cannot adjust the turrets based on what you see. It's ridiculous. Waste of money.

If you already bought this scope, well... You can zero it and use the MIL reticle for hold-over, but don't touch the turrets.
Besides, they don't track well anyway. Roll the turret from one extreme to the other and you'll find it didn't go back where it started. Shame.

Solid clicks, accurate tracking, holds up well, reasonable cost, side parallex adjustment, does what its supposed to do.

This is all nitpicking stuff...I would prefer finer crosshairs for 100 yard shooting, but in a hunting situation and at more reasonable distances these are fine. AO range marks are a little off.

Ive had 2 of these scopes for over 2 years now and not a bit of trouble with either one. Its a good solid first scope for my PCP rifles. I only stepped up to a more expensive scope because I needed a finer crosshair for very long ranges. Otherwise, I would buy another for my new high end PCP.

The image in the scope is excellent for a scope in this price point. The reticle and mildots are thin and won't block you view of small targets. Using the adjustable objective (and the optional 100 mm focus wheel) I can accurately determine the range of my target out to 55 yards The spacing of the mildots is accurate, which makes this scope excellent for field target use.

The knob for the adjustible objective is way to stiff. Installing the 100 mm focus wheel helped,

I have mounted this scope on my Benjamin Marauder, which make a nice combination for field target competition.

The 4-16x56 I received is very much up to my expectations. Quality of materials (given the price point) and machining are very good in my opinion. Assembly is excellent. The optics on my scope were great across all magnifications and distances; no ghosting, fisheye, or dark edges. The 56mm objective lens gathers more than enough light to make up for magnification extremes and low light conditions. I do like the memory feature on the illumination.

I'd really like to see an increased eye relief. For some reason I just need to have about 4" and this scope is at about 3", the industry standard. I realize everyone might have a different opinion but 36 colors? Red has always been just fine for me as long as I can adjust brightness. I didn't base my decision on that and I'd recommend it be about the last thing one considers. As I said above I do like the memory feature on the illumination though.

Sidewheel & AO Turret: The alignment of the optional sidewheel's markings with the parallax turret markings that have been the case of many negative comments were not an issue. The 110mm Big Wheel I received lined up perfectly with the markings on the turret. It takes a bit of fiddling to find the right sprocket alignment but mine lined up perfectly. I'd have to say that Leapers UTG finally took note and spent a bit more QA aligning the wheel's hard rubber sprocket to the turret. There is a bit of slop in the movement but its not a metal to metal contact so I'll accept that the interface causes that. I don't expect a scope at this price point to "tune" as $1K scope or even a $400 scope.

I just got this scope and this is not a full review but I am posting this to answer some questions that might interest some. The etched reticle has a much finer crosshair that the standard model. That is what I was after and rolled the dice and won. This scope is quite a bit larger than the 4-16x44mm model. It's a big scope. I mounted it to a Gen 1 Marauder using UTG medium 30mm mounts. The front bell barely clears the barrel w/o the scope cover. With the scope cover its a no go as it pushes the barrel shroud down. So no front scope cover with medium mounts but it lines up well with my eye with my cheek on the stock. Out of the several other UTG scopes I have this is the clearest. I spent a little more than the standard 4-16x44mm standard model with SF (which I currently own) but it was well worth the extra $$.

It is a big heavy scope. I would not recommend this for a rifle you want to drag around hunting all day. I bought this for field target so weight is not and issue and for my use a plus. The reticle is very fine. Again great for target work, much better than the non-etched reticle models. This may not be the best for reticle hunting but it does have the lighted reticle so that should overcome the fine reticle for hunting.

Though I have the side wheel installed I have not done any ranging work with it yet so I can't tell you how well/consistently is ranges.

I have tried a lot of scopes. For my shooting and for my money this is the scope I settled on. I have 3 and sold off the others. A+with me

It is a bit heavy to carry a lot, but 99% of my shooting is from the bench. Perfect for that..

I think the 36 color reticle is a waste. Maybe you would like it.. I never use it so a bit reduced on the price for doing away with it for me would be nice. Brian

Great scope. 56mm makes a hugh difference.

Nothing. Works great like it is.

You can use medium 33mm rings, but youll have to shim it so it doesnt touch the barrel.

This is a great scope for the money. I have purchased two of these fine scopes. The illuminated reticle gives the best vision on target no matter the background. Takes a beating from my .30 Caliber Springer and still holds up.

I wish I had purchased this scope for all my Airguns. Works well on pcp or springers.

The UTG Accushot is great for punching holes or bring home the game. Can't beat it for features for the bucks.

Value for the money. Ease of adjustment. This scope has a lot of options. Fits atop of my .25 Marauder nicely. Can not believe how accurate the AO is out to 50 yards. Makes a great FT scope. The 75 and 100 yard marks are on the money too. But you don't have the precise in between yardage marks as you do with 50 yards and closer.

Weight. This is a big, heavy scope. The AO side knob is hard to turn while sighting a target. But I added a wheel and it's now a piece of cake. I leave the scope set at 10x for ease of calculating mill dots. The adjustment is a two handed cranking on the whole scope to change settings. I don't know why it has to be so tight. Even the user manual says not to loosen any thing to make it easier to turn.

It's a 30mm tube and 56mm objectives, you need tall rings.

Have this scope mounted on my Hatsan Bullboss .25 cal. At 30 yrds can do dime size groups. This is my first etche glass scope and the difference between this and a regular mil-dot with the wire reticle is night and day. Cross hairs are thin which lets you see more of your target at longer distances.The mounting rings that came with the scope were perfect for my purpose (mounting on a bull-pup).

At dusk when the sun is low, there tends to be glare on the scope. The sunshade needs to be a little longer or UTG should make a sunshade that would screw it the end.There are thread there so it may be possible although it may reduce the field of vision..

Barring the sun issue, this is a great scope for the price and I would recommend it highly.