Some items excluded. Can be combined with free ground shipping on orders $150+, to contiguous US
Roll over image to zoom in
Lifetime limited warranty
List Price $899.95 Save $45.00 (5%)
as low as $76/month
Out of Stock
Click to get email when it's in stock!
Estimated in-stock date 04-05-19
Place your order now for delivery priority!
Excluded from coupons
This item is not eligible for coupon discounts
AirForce E-Pump Compressor 4500 PSI
When filling air bottles, do not leave the compressor unattended! Do not use for breathing air!
If you’ve wanted a way to fill your PCPs anywhere you roam, AirForce has delivered with the E-Pump, a 4500 psi high-pressure compressor that can go anywhere you can.
Allowing shooters to become their own fill source, the E-pump offers a lightweight and mobile solution. Weighing in at 40lbs, the E-Pump becomes a drag and drop fill source for PCP, paintball, and airsoft tanks. Choose to charge from a standard wall outlet, or take your show on the road by charging directly from a car battery.
The E-Pump features an adjustable cutoff switch, to prevent over-inflation. While many compressors are loud, the E-Pump provides a quiet fill source that is barely noticeable—even when you’re sitting in the same room. Each pump features an easy to read pressure gauge and a quick-disconnect fitting and hose.
Want freedom from commutes to your local dive shop and fire department for your air source? Choose the AirForce E-Pump and never go without air again.
This item is not eligible for coupon discounts
other products by AirForce
Create an online review and share your thoughts with other customers
Things I liked: The unit is compact, easy to transport and appears to use good quality/durable materials. It is relatively quiet and the pressure adjustment gauge is easy to set and read. The quick disconnect hose is adequately long for refilling PCP guns directly.
Things I would have changed: Factory quality control checks need to be improved. The fill hose/pump block fitting came with a leaky Teflon tape seal. The compressor fill pressure would not exceed 1250 psi when initially tested with the Air Venturi quick disconnect plug installed. After the tape was replaced, the unit was set to 4000 psi, pressurized and shut off at 4000psi. The compressor was then connected to a Benjamin Marauder Woods Walker but would fill only to 1850 psi. As suggested by the user manual, a soap solution was used to check the exterior connections; no leakage was detected.
What others should know: Pyramyd Air service promptly provided return authorization and credited my charge account. I would order the E-Pump compressor again when future reviews/ratings show that units are being properly tested at the factory. Although I did not need to remove the case, there should be an easier way for users to access the pump shaft when it needs to be lubricated.
Things I liked: Been waiting for the e-pump since last shot show 2018. Delivered by UPS from PA, packing was good, no problems there. Opened it up and after cleaning up all the peanuts, read the operations manual and set it up, super simple. Only maintenance is a few drops of synthetic compressor oil on the pump shaft every 60 hours of run time. I filled up my 49cc tank for my airforce talon ss From 0 to 3000psi it took 1 hour give or take a few minutes. Very quiet, no noticeable heat buildup on the case. The DC motor was warm to the touch but NOT hot. Seems well built and heavy, not cheap. So far very happy with my purchase.
Things I would have changed: As always a hundred or 2 cheaper would be fantastic.
What others should know: So far its great.
Things I liked: This unit isn't super quiet , however , it is quiet enough that when standing next to it while running it isn't annoying to your hearing . I used it to fill my Talon SS , from 800 psi to 3000 psi it took 35 minutes and the auto shut-off was set at 3000 psi and worked perfectly . Didn't touch the motor housing after my refill so I don't know if the motor got hot or not . So far I like it , will have to see in the long run how it holds up .
Things I would have changed: This being my first compressor the only thing that I would change is to make the refill hose longer , its' 22 inches and I had a hard time trying to set my bullpup next to the pump in order to refill , a 30 inch hose would have been better . I went online and bought a coupler and another hose to make my hose longer and easier for refilling .
What others should know: I give this unit only 4 stars : (1) it is slow , (2) refill hose is too short , (3) price should be $100 lower and (4) my unit came with a defective Foster Quick-Disconnect fitting , had to call AirForceAir to get a new one so I had to wait about 5 days before I could use this compressor .
Create an online review and share your thoughts with other customers. Show Other Reviews
I'm in the process of choosing a portable compressor for both PCP rifles ands 4500PSI cylinders (90cu ft) and have reviewed the Hong Yeng, Nomad and now the Air Force - a paucity of info on the Air Force yet it looks to be the best of the bunch IF it can be used for the 90 cu,ft bottle. Hong Yeng will do it at a 1/3rd of the cost and its not recommended for the Nomad - will the Air Force handle it? Prefer US made products if possible
It is rated to fill air tanks as well as guns directly, but the fill times are pretty long on most tanks
Will this work on most pcp air rifles or only on air force brand?
This would work with an PCP air rifle or pistol
How long does it take to fill an air force texan ss with this compressor?
They haven't been built yet so no one knows. That's why it isn't stated in the description.