UTG New Gen 80mm Add-On SWAT Wheel, For AccuShot SWAT Scopes

Was able to open bore to make fit my hawke.great quality..allows me to adjust parralex much easier..

O

Can't go wrong with this product

Solid construction, finish, fit. The 80 mm wheel is just the right size for my rifle/scope combination. Rifle is a Benjamin Marauder Field & Target with a UTG 3-12 X 44 True Hunter Classic Scope with 30 mm tube and mil-dot reticle. This scope has the side wheel parallax and works great with the 80mm wheel. It does not get in the way and has markings on the outside of the wheel for yardage. It also has 2 Allen head set screws to hold the wheel in place, it also has groves in the shaft that match the side wheel parallax cap to make positive contact and adjustments. The finish is mat black with laser etched yardage numbers that are filled with white so it is very easy to read. This is a great addition for the scope.

nothing at all.

The reason I wanted the side wheel is because the turret for the parallax adjustment was quite stiff. It will stay where you put it. This wheel makes it so much easier to use the focus on the side of the scope. To me, the side adjustment is much easier to use than the adjustment on the front of the scope.

Easy installation specifically for SWAT scope. Entry level FT equipment

Nothing, even comes with appropriate sized allen key

Good product great price

Nice tight fit. Easy to install.

Larger numbers or full flat dial face for adding calibrated tapes.

This one is a good size that doesn't interfere with left side magazines on RAW 1000x.

I have several of these and the best thing they have going for them is the price. Pretty good side wheel for the money.

The mounting system with the rubber bushing totally sucks. COME ON UTG, YOU CAN DO BETTER THAN THIS !! Fortunately I have a lathe, so I can make aluminum split bushings to replace the awful rubber bushing.

Very poor mounting system.

The numbers on the side wheel N scope matches and its very easy to see.

None

If I have one more scope and for that price I would order another right away.

Its a perfect fit for my leapers 6-24x56.

None

None

Worked perfect on my Athlon Talos BTR 4-14 scope. It does not need any modification and fits like a glove. The edge of the wheel also doesn't stick up past the scope turret, allowing me to still easily put the airgun away in its case.

I wish there would have been 3 or 4 grub screws to tighten this scope down. While it fits snugly and will not fall off, it can wobble slightly.

I haven't tried, but I am assuming that this wheel, along with the other two wheels made for the AccuShot SWAT scopes will fit the Athlon Talos BTR 4-14 perfectly as well. There is no information on the internet that I could find about this, so I hope this review helps other people in my position.

works good

extra screws

works nice with UTG swat

Nice wheel. Bought it for an accushot OP3 but would not fit.Turrets have different nubs on them. It can be fit without a lot of work. Yardage lines up.

adaptable rubber center to fit all there scopes.

Works great.