Left: Safety off. Right: Safety on.
Roll over image to zoom in
1-year limited warranty
Earn 150 Bullseye Bucks
List Price $168.00, Orig.Price $159.99 Save $10.00 (6%)
as low as $14/month
Bundle & Save $11.00!
Only 3 left in stock
|Max Velocity||700 fps|
|Cocking Effort||47 lbs.|
|Front Sight||Fiber Optic|
|Trigger Pull||4.0 lbs|
Create an online review and share your thoughts with other customers
Things I liked: This pistol is heavy duty and powerful. IMO heavier pellets are best for accuracy and hard impacting (greater than 10.0g). This pistol performs nearly with the power of an air spring rifle. I have been amazed at the power. I am hitting paper targets at 50 yards with the open sights, bench resting. I do not have a chrono, but with 8.5g pellest, it seems like it is more in the range of 800 fps. Impressive performance for an air spring pistol. This is a great air spring pistol, and a good value for the price. I recommend it.
Things I would have changed: I had to adjust the rear sight almost to the limit because out of the box it shot so far to the left. This to me, as an engineer, means that the rear sight mount and/or the front sight mount is not trued to the bore axis. I did finally get it adjusted, but this is a QA issue that has disappointed me some. These pistols could be bore sighted before shipping, along with a QC check point for axial sight mounting precision.
What others should know: I have ordered an air pistol scope with cross hairs, and dove tail mount. This will be the best way to get top accuracy from this pistol IMO. Be careful when inserting pellets, as some pellet designs tend to jam when inserting into the tight chamber (Crosman Premier Piranha 10.5g). The plastic cocking assist is needed IMO, cocking without it is really not intended, given the location and size of the front sight. Remove it when firing.
Things I liked: Awesome pistol
Things I would have changed: nothing
Things I liked: Excellent quality pistol for the money. Once sighted in for 15 meters, it fired a variety of different size .22 pellets accurately. Cocking, with the assist, is fairly easy.
Things I would have changed: Trigger safety could be of higher quality. Would prefer gas piston to spring.
What others should know: Great value & a fun gun to shoot.
Create an online review and share your thoughts with other customers. Show Other Reviews
I have used the browning 800 22 cal and its awesome, however in the instructions they stress the type of oil to be used and not to much either so what type and where can I get it ?
It depends on what you are trying to lubricate. Give this lubrication guide a read, Pyramyd sells the lubricants and oils mentioned inside. Read the spring gun maintenance section. https://cdn.pyramydair.com/site/manuals/RWS_SpringGunTips_Umarex.pdf
If so many pistols are basically the same in construction. The price is the difference and the trigger pull and the stength of cocking the gun. Why the difference in the price. One is 19lbs and another is 58lbs. Guns look the same. What metals are they using that is so much more expensive,that warrants the higher cost.
That really depends on what you are comparing this to. One thing to keep in mind, if the cocking effort is higher, it's got a more powerful spring or gas ram inside of it, which means it should be shooting harder than something with less cocking effort.
Can I mount a UTG Weaver/Picatinny Riser Mount, Medium Profile, 0.83" High (PY-A-3404) on this Browning?
I used this adapter on mine and had issues with it sliding. Even fully tightened down, the adapter slides from the anti-recoil. I VERY CAREFULLY drilled a small hole in the top of the gun to receive the set screw on the adapter.
It would have to be a UTG 11mm to picatinny mount UTG New Gen Dovetail-to-Picatinny/Weaver Adapter,... .
|Max Velocity||700 fps|