ASG Pistol Rail Mount, 4 Weaver Rails

It fits Gamo P430 or Sig Sauer P226 perfectly.

It is made of plastic.

Nice mount to add a red dot to my BB repeater, which has no provision for a red dot.

It would be better if it were available as an aluminum piece, not plastic. It's a little flexible and I'm a little concerned that if the pistol is dropped or bumped into something it could break, especially in the cold.

It's not a metal mount and the lock screws are pretty small. I'm not using the side weaver mounts, so I cannot comment on those.

For the example I got, its more a functional decoration than an actual rail. It relies on the grub screws for alignment, not the rail on the gun, so it's a bit hard to get installed and aligned correctly for putting a sight on it. Guessing this is the result of loose tolerances for the thing that keep you from mounting it the usual way on a rail.

Tighten the tolerances so it can be mounted like any other rail accessory.

I bought this as a part of an experiment for putting a red dot sight on a pistol. I just threw it on a gun I really don't care about that much. Because of the way it installs, I would not be using it on something I cared about since there's a pretty good chance you'll end up scuffing it up. I have really not tested this long term, but I have very little confidence that it will hold alignment.

It's very inexpensive ads functionality two pistols that don't already have picatinny rails. Allows for sites you wouldn't normally use on pistols.

The retaining screws are absolutely horrible the wrench included is not thick enough to tighten the screws and the screws themselves strip pretty quickly so unless the attachment is loose don't even bother using them you could end up permanently installing this or damaging your pistol when you try to remove it

Just make sure you fit it properly and if you have other screws that will fit the retaining holes use them the ones included are horrible

Ordered this to go on my ASG CZ75 P-07 fits like a glove....Iam going to order another rail mount for my Umarex XBG bb pistol...fits nicely on it. Well made....

n/a

To my surprise...this rail mount works well on my other pistol.....Buy it!

Great Product

dirt cheap, and of that very durable fiber reinforced plastic you find implemented in really tough applications, specificly because it's a really tough plastic.

sell the little side rails separately.

i am using the side rails for a lite application, glued and screwed to my synthetic stock....great for that...and you can probably hack off the other rails too and use them however in that capacity also...but be carefull with the glue and do a good job, or don't do it, and they will hold a majority of lighter accessories securely..

Looks cool. Plenty of rail space.

This rail mounts with set screws and not to the slots in your gun's rail.

This mount does not utilize a bolt that interfaces with the slot on a gun's accessory rail. It uses 4 set screws to hold itself to a gun's frame, which is not very secure and can mar the plastic or the finish on a metal frame. It works fine on my C11 but I wouldn't trust it on a blow back pistol, and definitely not on a real firearm.