Nardi USASee manual
Sold & shipped by PyramydAir
It is recommended that this compressor be used to fill scuba tanks and other types of high volume devices you may use to charge your airgun. When filling air bottles, do not leave the compressor unattended! Do not use for breathing air!
This item is not eligible for coupon discounts
Item Code: NAR-AtlanticG [PY-A-5219]
Create an online review
Its fast, and easy to operate. I have a scuba tank, and a fiberglass tank. 3k, and 45k. I bought my nardi from PA about 3 years ago and it is still running fine. If you like to shoot paper, or varmints this is a must have. A big plus is how portable it is. Light enough for me to lift and load in my car or truck. I too have it on wheels at home in my shop though. Very happy camper here.Things I would have changed:
To the unit itself nothing. The owners manual does have room for improvement ( not a deal breaker though). Wish it came with all adapters and fittings to air up tanks right out of the box.What others should know:
You will need to purchase the mentioned adapter to be able to use this compressor. You will love the time and money you will save now that you wont have to make all those trips to get tanks filled. More time to shoot your guns now that air is available to you at your convenience
Everything pro grade equipment you can't go wrong buying this item no more trips to the dive shop no more than ripping you off for hundred pounds five hundred pounds here and there you know before you leave the gadge says 3300psi you get home it says 3000,i get robed every time can I have a bad shooting experience this changes all of that I went out and bought a 4500 PSI tank I got this machine I timed it I top it off from 2000 - 4500 in 8 minutes this machine is a winner. And you can take it with you on the back your truck all you need to do is get to 300 din feamale adapter with niple on end and you can fill any tank anywhere thats right anywhere,, this is the greatest machine I've ever bought Pyramyd Air thank you so much every gun session every hunt every target practice is a blessing are you air gunners this is actually 10 Stars Pyramyd Air you're the bestThings I would have changed:
Absolutely nothing I am so pleased with this product I can't say anything not one single thing bad about it only thing I can say is that you have to fill your tanks to the right side of the machine when you're facing the side that doesn't have the cover on it because the exhaust from itWhat others should know:
Stop at nothing to buy one of these save your money sell one of your guns or to your guns get this machine it cuts out all the crap going back and forth wasting all that gas going to the dive shop not only are you putting miles on your car or however you get to and from dive shop how many times should go to the dive shop and you have 3300 PSI that gave you and you get home and it's only 3000 I timed it from 2100 to 4500 PSI in my tank that is a 4500 PSI tank 8 minutes this is a no-brainer guys don't buy any other machine but this product no one else sells it for this price if you don't want all that aggravation of going back and forth to the dive shop and not being able to get your tank at times cuz they close this is a no-brainer buy it from Pyramyd Air no matter what because nobody else has it at such a good price and the thing is built prograde just like the firemen use only there's a setup for breathable air like I said you'd be a fool to buy any other place buy from Pyramyd Air
Looks well built, but performance I cannot comment on as the manual is not clear on operation. At least not to me, so I have not attempted to use it. Pretty useless if you are afraid to operate it for lack of concise instructions. I do admit that I am less than mechanically inclined, but most things I have purchased have step by step instruction for use.Things I would have changed:
Ensure manual gives STEP by STEP instruction for starting, hookup to tank, filling, and securing unit. Or PA should develop this and send it out with unit.What others should know:
Be aware that if like me you cannot follow the manual or already know how to operate a HP compressor, that repeated inquiries to PA will not even be answered with at least a "can't help you" answer. First try they did send an Email copy of the manual I already possessed. Four more inquiries have gone totally unanswered. Pretty sad when you consider I have spent over 17,000 dollars there in last two years.
Got a question or answer?
Does anyone who has this compressor have a good step by step sequence for starting , filling, and securing. Manual is confusing on steps. Have written pyramyd air for help but other than emailing the same manual have been absolutely no help and have ignored all further requests for help.
Hello, I have had mind about two years now. Works well but one time I did have to drain the carburetor bowl because if junk in the bottom of the bowl. So.......starting, (1) Connect your fill bottle to the full hose. (2) Make sure the bottle valve is closed and the bottle release valve is also closed. (3) Open both release drain valves on the compressor. (4) put choke on (if cool outside). (5) Move the gas lever to about one half open. (6) Turn the on switch to (on) from off (located on side of motor. (7) Pull the start rope as needed to get the gas engine running. (8) After the engine is warned -up and running okay close BOTH DRAIN VALVES on the compressor. (9) As the pressure builds up on the fill gauge located on the hose OPEN the FILL BOTTLE. (10) You will see the pressure slowly build-up in the FILL BOTTLE GAUGE. (11) When the FILL BOTTLE GAUGE READS 4,500 psi CLOSE the FILL BOTTLE VALVE. (12) Working fast, with fill bottle valve closed......turn the switch to the off position and shut the engine down. You air tank should be filled. I also let some air blow out the two relief drain vales about every 10 minutes of running the compressor. Open each one for about 3-5 seconds at a time you will see a lot of water blow out, close when no more comes out. I am sure this is the same procedure for the electric model. I hope this helps, if not call me 301 977-4405...Maryland
Is there any American manufacturer that makes a compressor for pcp airgun tanks? The major problem for anything made in Italy is finding parts or someone to repair them when they break down. Everything mechanical ALWAYS breaks down eventually! Other than the outrageous price per unit, I really have no faith in the quality of the offerings sold here, and will drop my interest in going pcp unless my faith is restored. The nearest dive shop around here is a 45 minute drive. That kind of fill up is not realistic, nor is using a hand pump for a man my age. So, it's a good quality compressor or not at all!
How long it'll take to fill up 88 cu ft tank?
About 45 min. to an hour.
Out of Stock
This item is past due. Check back for updates.
Out of Stock
Estimated in-stock date 07-27-22
Out of Stock
Estimated in-stock date 07-20-22
Only 4 left in stock
Get FREE shipping on qualifying orders!
Any order $150+ with a shipping address in the contiguous US
will receive the option for free ground shipping during checkout.
Certain restrictions apply.
Free shipping may not be combined with a coupon unless stated otherwise.
View Shipping Info
We work hard to get all orders placed by 12 pm EST out the door within 24 hours on weekdays
because we know how excited you are to receive your order.
Weekends and holiday shipping times will vary.
During busy holidays, we step our efforts to ship all orders as fast as possible, but you may experience an additional 1-2 day delay before your order ships. This may also happen if you change your order during processing.
View Shipping Times
It's important to know that due to state and local laws, there are certain restrictions for various products.
It's up to you to research and comply with the laws in your state, county, and city.
If you live in a state or city where air guns are treated as firearms you may be able to take advantage of our FFL special program.
U.S. federal law requires that all airsoft guns are sold with a 1/4-inch blaze orange muzzle or an orange flash hider to avoid the guns being mistaken for firearms.
View Shipping Restrictions
We have a team of expert technicians and a complete repair shop that are able to service a large variety of brands/models of airguns.
Additionally, we are a factory-authorized repair/warranty station for popular brands such as
Air Arms, Air Venturi, Crosman, Diana, Seneca, and Weihrauch airguns.
Our experts also offer exclusive 10-for-$10 Test and 20-for-$20 Service, which evaluates your air gun prior to leaving our warehouse. You'll be able to add these services as you place your order.
View Service Info
Shop and purchase with confidence knowing that all of our air guns (except airsoft) are protected
by a minimum 1-year manufacturer's warranty from the date of purchase unless otherwise noted on the product page.
A warranty is provided by each manufacturer to ensure that your product is free of defect in both materials and workmanship.
View Warranty Details
Didn't get what you wanted or have a problem? We've got you covered!
Return any item in new condition along with its original packaging and any accessories
that might have come with your air gun and receive a full product refund within 60 days of purchase
or, if you'd prefer, exchange for another product.
Our customer service team can help determine the best course of action and provide you with some options in the event you're interested in an exchange.
Learn About Returns
Join the Pyramyd Air mailing list: Our e-mails are filled with new products, deals, sneak peeks, tips and tricks, contests and more - sign up today!
Airgun safety is no accident. You must be 18 years or older to buy any air gun or air rifle in our store.
Text JOIN to 91256 and get $10 Off Your Next $50+ Order.