Seneca .22 Cal, 28.5 Grains, Domed, 125ct

Accurate. One hole.

They are sized for Korean .22 which is @ .221 versus .217 to .219 for American. Old European air guns are also big. Obviously ..size American..at least SOME BATCHES ! Preciousity of airgunners...put pells in a empty tin that you like. Simple. Plink with damaged ( slight) pells. Simple.

I have zero problems with loading..provided..1) absolutely straight insert to bore. 2) use flat surface to push pell.( I use my thumbnails on either side of breech( safety issue) and wiggle in.) Guns: Beeman Mach 12.5, Hatsan 125 non sniper, Hatsan Edge spring; Beeman Grizzly. The accuracy is due to groove/lands tight fit. Grip and spin pellet well.

Accurate in my Sumatra at 860 fps. No flyers at this speed.

Screw on lid.

Warning: Lots of reviewers using these in Benjamin pumpers are taking a risk of blowing off the soldered-on breech, especially older guns. The weight of these pellets and barrel fit causes a higher static breech pressure (900-1000psi) for a longer time before the pellet moves down the barrel when the valve releases. In other words, high back pressure on an old solder connection. It will be just a matter of time before it separates so be mindful of it.

They look cool.

Make them so they will load.

They are very hard to load and wouldn't work in my magazine on a swarm series Gamo

the price is good , one hole groups

offer tins of 250 or 500 and some foam padding in the tin , better quality control , found 1 or 2 per tin that had holes and missing lead in the nose and 8 to 10 that the nose was deformed a little , some fit a lot tighter than others

I had no flyers but they did fit tight in my delta wolf , at 24y and 912 fps I shot 3 groups of 3 and had 3 holes on paper that were a single hole with no over lap just a single perfect hole that all 3 pellets went threw 3 times , they shot better than the jsb 25gn RD but hit harder and no flyers

I set my delta wolf to the fac setting for JSB 25 g monsters and they shot at 900 fps and did load tight in the barrel but the group I got at 20y was smaller than a dime for 10 shots and they did hit real hard , so the do group very good in my gun

more per tin

for the money give them a try

Fits in the magazine of the Stormrider, but works quite well with my Diana Stormrider.

Nothing at all, the rounds are perfect for what they are.

These things work quite well with PCP rifles. I have a Diana Stormrider and these rounds work quite well with them.

I like their weight also their Length A lot of bearing service in Bore . Pellets are oversized you need to buy whatever caliber you have have both calibers of 5.5 pelletizer or a 4.5 pellet Sizer they have to be sized for before you use them theyre too tight hard to push in the bridge of my Springers other than that after sizing theyre awesome very accurate you need a powerful gun . To push that lead mass out if you have that they’re very accurate I wish I could send you a photo they splat ouch to an inch in diameter wow

I would change the can they need to make it more user-friendly it’s very hard to get open very thin very tight fitting very smooth no grip not fun

I mentioned before I put Vortech spring kits In a Beeman R – one also HW number 80 also a Diana 350 magnum. All supercharged spring kits and silicone impregnated pistons it’s a serious wack attack

I like their weight also their Length A lot of bearing service in Bore . Pellets are oversized you need to buy whatever caliber you have have both calibers of 5.5 pelletizer or a 4.5 pellet Sizer they have to be sized for before you use them theyre too tight hard to push in the bridge of my Springers other than that after sizing theyre awesome very accurate you need a powerful gun . To push that lead mass out if you have that they’re very accurate I wish I could send you a photo they splat ouch to an inch in diameter wow

I would change the can they need to make it more user-friendly it’s very hard to get open very thin very tight fitting very smooth no grip not fun

I mentioned before I put Vortech spring kits In a Beeman R – one also HW number 80 also a Diana 350 magnum. All supercharged spring kits and silicone impregnated pistons it’s a serious wack attack

If you have a gun that will shoot them, these are a hard-hitting pellet that punches above its weight. They don't fit every bore well, nor do they fit every magazine. They get the best push from a pcp or magnum break barrel.

Although the last tins I've purchased are far better, I have received tins of dirty-looking pellets. Expect the occasional bent skirt.

These are a good hunting load in the proper gun, and carry lot of wallop.

The price was good. The initial design got me to try these as they look impressive and the weight would have lots of punch on small game.

I thought I'd try these as most springers like heavier pellets. These did not do so good. My Aspen and Swarm magnum just didn't digest and shoot these very well.