










CenterPoint 1-Pc Mount, 1" Rings, Medium, 3/8" Dovetail, 4 Screws/Cap
PY-A-3632
Not Available
View more products from CenterPoint
Description
Helpful resources:
- Tips for picking scope mounts
- 1" rings
- 1-pc mount
- Medium profile
- Fits 3/8" dovetail
- 4 screws/ring cap
- 3 hex screws secure the base
Overall Rating
Review This Product
Tell us what you think
7 of 7 CenterPoint 1-Pc Mount, 1" Rings Reviews
Nothing special to comment on here.
Things I Would Have Changedwill not fit the centerpoint 4-16x40 illuminated scope. Not so much due to the 40mm ocular lense but because the center portion interferes with the buldge in the scope where the turrets and illumination dial are located. Also the mount does not come with the sticky pads as shown in the pictures. The rings themselves are smooth allowing fore scope creep. Not good.
This mount and scope were recommended by a Pyramid Air staff member. I have learned that it is best to do one's own research. This mount is too long and does not fit the Browning 800 Express I bought it for. The base of the mount is about 1/4" too long for the dovetail on the gun. To make things worse the (2) hex wrenches included in the kit are both too small and do not fit the mounting screws. Although it looks like decent quality for the money what good is it if you can't use it.
Things I Would Have ChangedMake sure the hex wrenches work with the screws provided before packing. That is not Pyramid Air's fault but after all the product is made in China. Customer/tech support should be better informed with product compatibility before making recommendations and wasting customer's money and trust.
What Others Should KnowThis mount will not work with a Browning 800 Express. It is too long to fit the gun's grooves. You will not be able to use the mounting hex wrenches provided, they are too small. I'm guessing they are also poor quality (why include 2 if you don't expect them to break.)
very sturdy, good overall quality!!!
Things I Would Have Changedthis mount is about 1mm from being able to fit the "CenterPoint Optics 3-9x40 Adventure Class Rifle Scope"
great mount,copy o the UK Sportmatch.
Things I Would Have Changedneed 4 screw base rail.
What Others Should KnowSame as Centerpoint.
This is a very good 1-piece mount. The internal stop-pin is essential for spring powered airguns.
Things I Would Have ChangedS/H charge is excessive for such a small item.
What Others Should KnowMount claims to fit up to 45mm objective...My 40mm with A/O ring up front fits, but won't clear for the lens cap.
Ordered from PA smart post, said it would be here on the 7th.....got it on the 6th. For the investment it's great. Easy to install, everything needed to install is provided, screws, allen wrenches, stop pin etc. (Even extra screws,stop pin) Mounted on GP nitro, immediately went to shoot and all was well. I won't be sending this back. Going to order another for Hammerli X2.
Things I Would Have ChangedI hooked my twin daughters into shooting air rifles and they love it. They want to know if this product will ever be offered in pink?
What Others Should KnowAll of the Crossman/Benjamin "thumbhole" stocked nitro piston rifles are not really thumbhole but hand hold stocks. As a result, the comb is high and forces you to crunch your face to get a good sight picture. This mount raises the scope about 3/8" which rectifies that problem IMO. It's a good product and I am happy with it.
Get FREE shipping on qualifying orders! Any order $150+ with a shipping address in the contiguous US will receive the option for free ground shipping on items sold & shipped by Pyramyd AIR during checkout. Certain restrictions apply.
Free shipping may not be combined with a coupon unless stated otherwise.
View Shipping Info
During busy holidays, we step our efforts to ship all orders as fast as possible, but you may experience an additional 1-2 day delay before your order ships. This may also happen if you change your order during processing.
View Shipping Times
U.S. federal law requires that all airsoft products be sold with a 1/4-inch blaze orange muzzle or an orange flash hider to avoid being mistaken for regulated products.
View Shipping Restrictions
We can test and adjust your equipment at our warehouse before shipping, so you receive a product that's ready to perform right out of the box. We can even set up an optic or other equipment so you can get out shooting without the hassle. For bowhunters, our certified master bow technicians provide services such as assembly, optics zeroing, and full equipment setup, which can maximize the potential of your purchase.
By leveraging our expertise and precision, we ensure that your equipment is finely tuned to meet your specific needs and get you ready for your outdoor pursuits. So look out for our services when shopping for something new, and let our experts help you get the most from your outdoor adventures.
View Service Info
A warranty is provided by each manufacturer to ensure that your product is free of defect in both materials and workmanship.
View Warranty Details
If you need to return an item please read our return policy.
Learn About Returns
Get FREE shipping on qualifying orders! Any order $150+ with a shipping address in the contiguous US will receive the option for free ground shipping on items sold & shipped by Pyramyd AIR during checkout. Certain restrictions apply.
Free shipping may not be combined with a coupon unless stated otherwise.
View Shipping Info
Join the Pyramyd AIR mailing list: Our e-mails are filled with new products, deals, sneak peeks, tips and tricks, contests and more - sign up today!
Text JOIN to 91256 and get $10 OFF Your Next $50+ Order!
* By providing your number above, you agree to receive recurring autodialed marketing text msgs (e.g. cart reminders) to the mobile number used at opt-in from Pyramyd AIR on 91256. Reply with birthday MM/DD/YYYY to verify legal age of 21+ in order to receive texts. Consent is not a condition of purchase. Msg frequency may vary. Msg & data rates may apply. Reply HELP for help and STOP to cancel. See Terms and Conditions & Privacy Policy.
Feb 16, 2018
By John
Good solid mount, does not slip on my springers. Extra screw are nice since you may have to replace one due to poor tapping process.
Things I Would Have ChangedDo a better QC on the drilling and tapping. Ordered 3 sets and had one stripped screw on each set
What Others Should KnowDo not over torque