Date: 28/9/2020 17:57
0
Airgun Hunting is Legal! Check to see what is allowed in your state ⭢ Check It Out!

Hawke Match 1" Rings, Low, 3/8" to 11mm Dovetails

4.511 reviews
Hawke Match 1"

Roll over image to zoom in

Share your images

Pick Your Option

Lifetime limited warranty

PY-A-5163

$18.99

List Price $20.99 Save $2.00 (9%)

Add to Cart

In-stock

Estimate Shipping

Add to Compare
Add to Wish list

  • 1" rings
  • Low profile
  • Fits 3/8" to 11mm dovetails
  • 4 hex screws/ring cap secure your scope
  • Retractable scope stop pin
  • High-grade aluminum
  • Rings lined with textured, cushioned tape to securely hold scope
  • Includes 2 hex wrenches


You've spent some hard-earned dollars on your scope, so it doesn't make sense to cut corners when buying a mount. The mount is the guard dog of the scope, making sure it stays put and doesn't shift around.

That's why you need these Hawke match rings. Each ring has 2 hex screws clamping the base to your air gun. Even better, each ring has 4 hex screws to snugly hold the scope tube. Surrounded by cushioned tape lining each ring, your scope tube will be solidly held in place.

Since spring-piston air guns can have some pretty harsh 2-way recoil, one of the rings has a scope stop pin to further anchor the ring and help prevent movement.

In stock


Item Code: Hawke-22100 [PY-A-5163]

other products by Hawke Sport Optics

Share

Average Customer Review

4.5 (11 reviews)
3 star2 star

Create an online review and share your thoughts with other customers

1.0 1.0

1.0 1.0

By David from USA on 2019-04-09
See all my reviews
Was this review helpful?
0.00 ratings

Verified Purchase

Things I liked: I liked the construction, finish, and padded tape inside the rings.

Things I would have changed: The rings would not fit the 3/8" in rails on my Ruger .22 rifle. The product description said to rotate the clamp to fit 9-11mm or 3/8in rails, but the clamp would not fit the 3/8in rails. I believe this is because the ring clamp holes were not drilled in the correct places. I had to use a Dremel to enlarge the holes to allow the clamp to fit.

 

5.0 5.0

5.0 5.0

By Dennis from USA on 2018-12-09
See all my reviews
Was this review helpful?
0.00 ratings

Verified Purchase

Things I liked: Very easy to install and I believe very good quality.

 

4.0 4.0

5.0 5.0

By Lonie from USA on 2018-07-28
See all my reviews
Was this review helpful?
0.00 ratings

Things I liked: The main thing that I really liked about this , product is the double screws and they're very well built and they're strong enough to stand up to even bigger rifles not on just an air gun

Things I would have changed: Absolutely nothing

What others should know: I put a set of these on a 243 Savage model 99e and they were perfect no problems no failures absolutely perfect product for light Centerfire rifles very strong product

 

Create an online review and share your thoughts with other customers.   Show Other Reviews

Got a question? Got an answer?
Log in, then enter your text.

  • John from USA asked:

    How low is the low from the base to the scope tube? (I am mounting on a PCP where the rail is raised. If they could make them, I'd have rings barely big enough for the screw to hold them on.)

    • Mark from USA:

      Approx 3/8"

  • John from USA asked:

    Will these rings work with a 44mm bell scope

    • Mark from USA:

      No

  • michael from USA asked:

    I would like to use these low profile rings for a Vism hog terminator 3 9 x 42 I need about 1" from bottom of tube to top of rail.

    See all discussions

    Navigation