Roll over image to zoom in
Lifetime limited warranty
List Price $129.99
as low as $10/month
Create an online review and share your thoughts with other customers
Things I liked: replaced the centerpoint scope included with my benjamin mayhem ,22 cal np2 sbd because the wire reticle was too thick and it bothered me. this new leapers is dynamite. now i can see quite clearly. mil dots are great for me.
Things I would have changed: don't need the illumination aspect.
What others should know: good scope for the price. will see how it holds up to my break barrel. so far so good.
Things I liked: The reticle is useful and easy to acquire and the turret knobs are of decent quality.
Things I would have changed: Knowing what I know now I'd probably opt for a side focus knob
What others should know: This scope was nice and worked well until I changed yardage. I ran a small test, 5 shot group at 20 yards on a quarter, adjusted the focal distance and then brought it back to the 20 yard position. The POI shifted a good 2 inches at 20 yards, not theoretically, ACTUAL poi moved. So don't expect to take this scope hunting, or to any sort of field target range. Unless you only shoot at 1 distance and will not ever change that distance, go with something else
Things I liked: This the fourth one of these I have bought. Good quality, sharp image to the edges of the viewing area of the scope. I especially like the 5 yard focusing distance of the A/O.
Things I would have changed: Better instructions on how to get the various colors of the cross hairs.
Create an online review and share your thoughts with other customers. Show Other Reviews
Will this scope fit on and hold up to the Hatsan 135 Vortex QE? If so will the ring that come with the scope work?
Yes, I wouldn't recommend using the weaver rail on the hatsan rifles as they are not standard
Would this fit on a Hatsan 125 Sniper?
Yes, you can use the rings that come with the rifle
Hi, when using this scope with sunshade made for this scope, how do I keep the sunshade attached? There is no end ring to remove so my sunshade comes loose when re-focusing. My guess would be set to infinity and use blue Loctite?? Any help appreciated!
I wouldn't recommend loctiting the sunshade on. When you make parallax adjustments, just don't grab the sunshade to do it, use the actual adjustment bell.
What type of scope base is on your gun? What type of mount do you need? Weaver, Picatinny, 3/8″ or 11mm? Do you need 2-pc mounts or a 1-pc mount? 30mm or 1″? Scope mounts intro (Airgun Academy class)
Scope includes mount. Need a different mount?