M1A/M14 Scope Mount System

Its a sturdy mount. I had no problem with mounting it on my rifle, just use the correct bolts for the correct holes. Its that easy. I'll probably use a red dot or a lpvo as a longer scope may cover the loading port.

Better instructions for people who aren't familiar with this type of mount. You might want to put a small drop of clear fingernail polish on the threads to stop vibration from working them loose.

It's a solid mount. No complaints here

was easy to install and now waiting to get scope

nothing

you can count on getting just what you ordered

If you are buying the M1A air rifle from pyramid, this is a great choice to make for mounting a scope. I did this and I'm very happy with it, however there are a couple things that you MUST DO if you want to make this unit work. The M1A air rifle from pyramid is an incredible deal for $200! However, the rifle itself comes with two 5m holes in the side for mounting a scope, but this kit comes with (1) 5M screw and (1) 6M screw which, if used, WILL strip out the soft brass screw hole. The answer is simple, go to your hardware store and buy (2) appropriate length 5M screws, and (5) 5M washers which are required for the backing behind one of the 5M screws. I was able to find both of these screws as well as the five needed washers at an Ace Hardware by my house already in anodized black.... Looks great on the rifle. One final thing that you will need, a cheek riser to put on the spot stock so you can use your scope effectively. I don't recommend sheeping out, get a nice leather one!

High quality steel, make sure to read above!

does the job

nothing

main rail was great

bolt are cheaply made and had to were not properly threaded had to fix it myself.

All steel mount

Nothing

If you are putting this on an air rifle, just realize that you’re mounting it to a piece of plastic. The “receiver” is just a piece of plastic with a brass nut.

The mount did its job 110%. The rifle did not hold up to the challenge.

Solid metal construction. Fits perfectly onto my M1A

Nothing

Allows you to install an optic on the replica M1A air rifle .

Mounts easy a so does my scope

My make the mount a little taller so you can use & adjust your pep sight higher.

Take your time screwing the mount screws in fine threads.

The rail does not interfere with loading the rifle, and the mount is well made, and sturdy.

Nothing.

Not the fault of the mount, but I needed to clean up the threads on the receiver with a metric tap before the mount screws would start.

This high quality Venturi M-14 Scope Mount System fits perfectly and effectively on the Venturi Springfield Armory M-14 22 cal pellet rifle. I While the open sites of the rifle are very suitable for plinking, target, or plain instruction on sight alignment and sight picture for a target shooting student, the scope mount allows putting a hunting scope on the rifle for Starling elimination in the back yard. I waited a couple of months for this to come back in stock and the wait was worth it. I tried out an M-14 scope mount I purchased on Amazon, but it did not fit the pellet rifle, so I sent it back. Pyramid notified me when the Venturi mount was back in stock and I immediately placed my order. It attaches perfectly and solidly without any modification to the stock rifle.

Nothing

Your best option for a perfect picatinny scope mount fit on the M-14 pellet rifle.