Some items excluded. Can be combined with free ground shipping on orders $150+, to contiguous US
Roll over image to zoom in
1-year limited warranty
List Price $99.99 Save $10.00 (10%)
as low as $16/month
Only 1 left in stock
Vortek PG2 SHO-Tune Kit fits Air Arms TX200 / Pro Sport Air Rifles
EZ Install, only 25mm pre-load to install!
No compressor needed to install!
No tight guides, and no seasonal greases that limit full shooting performance
Give your TX200 and Pro-Sport over 12+ ft-lbs of energy!
This is the latest assembly of the PG2-Air Arms TX200/Pro-Sport Tuning Kit complete with assembled guide arrangement + tophat. This kit is engineered to produce the smooth, consistent velocities and eliminate spring harmonic noise. With this kit, you will achieve 12+ ft-lbs of energy and your air rifle will perform exceptionally smooth during lock-up, and quiet the close of the cycle.
To have your tuning kit installed on your personal air rifle, call Pyramyd Air's Customer Service line at 1-888-262-GUNS (4867) to arrange service and delivery. To have a kit installed on a new air rifle purchase, purchase a compatible rifle, the VortekTune Kit, and Tune Kit installation service (for an additional fee) to have your rifle arrive with the Vortek Kit installed.
Tuning Kits installed by Pyramyd Air carry Air Venturi's 1-year limited warranty.
other products by Vortek
Create an online review and share your thoughts with other customers
Things I liked: Made my TX200 .22 very quite! Accuracy the Same on a good day (seated position) hardly any recoil!
Things I would have changed: Being able to add preload, yes you CAN'T add pre load washers in this TX200 tune kit. The moly piston seal that comes with the kit is useless it's to small! Don't give you much power at all! I'm using factory AA piston seal.
What others should know: It takes around 500 shots to break in but after that you'll get very good consistency with RWS hobby 11.9gn avg. Of 785fpe 16.2fpe with JSB 15.89 avg. 656fpe 15.2fpe
Things I liked: UPDATE ^ I didn't think a springer could be so quiet but this one is the quietest Springer I've ever shot. Now just over 500 shots I consider it broken in .Super quiet in both cocking and shot cycle I am very happy and will buy one for my Beaman R9. Also there is a slight increase in power. As before artillery hold had to be adjusted about an inch forward on stock. Accuracy was not compromised pellet in pellet at 35 yards. Now $ 1,160. In this gun [Crazy] If this works as well in my R9 I may be purchasing more for all my German guns. Once again let me exclaim. (SMOOTH!)
Things I would have changed: Can't think of a thing.
What others should know: If you have a noisy Springer give this one a try.....
Things I liked: Just breaking the sin on my TX200 just under a hundred and fifty shots cocking Cycles very smooth and I do sense a quieter action when firing a fairly quiet gun to begin with but more of a thunk. A little more power and accuracy the same...
Things I would have changed: Nothing yet
What others should know: The real test Will come after five hundred shots if no problems it should be smooth sailing from there. Money well spent if it continues to fire like it does you always take a chance on these aftermarket kits 65 or so FPS increase with the high output kit artillery hold had to be changed slightly I have over $1,000 already invested in my Springer
Create an online review and share your thoughts with other customers. Show Other Reviews
Does this give sub 18fpe because the TX200 I have does sub 15fpe with 15.89gn as others pellets do full 18fpe? This kit for better shooting experience more or so not for power?
So if you cleaned the barrel, and have checked the piston seal, my only though is maybe the stock screws or your scope. Make sure the stock screws are tight and that your scope and mounts are solid. Maybe try another scope on it to verify. Or if you recently got a new batch of pellets from what you were shooting before, that could be it. Hard to say anything with certainty though.
Thanks, I should of keep reading also Tyler my TX200 been shooting all over the place?? I relubed it cleaned the barrel an everything I inspected seals they look okay to me but I cant get it to shot consistently accurate groups like before? Any suggestions?
Users can expect 15-17 FPE after installation
Does it come with power washers?
Does this kit fit in my sub 12 fpe version tx200hc ???