Tag Archives: Air Venturi Pro-Guide spring retainer

Comparing the T05 trigger to the T06: Part 3

Posted on by B.B. Pelletier ↓ 47 Comments

by B.B. Pelletier

Part 1
Part 2

RWS Diana 34 Panther
Part 1
Part 2
Part 3
Part 4

Pro-Guide spring retainer system for RWS Diana rifles: Part 5 — The RWS Diana 34 Panther
Part 5

I’m testing the T06 trigger today using the accuracy test as a means to evaluate the operation of the trigger. The object is not to see how accurate this RWS Diana model 34P is. We already know that from tests run long ago. But as I try to shoot groups with the gun, I can get the feel of the new trigger better than any other method. So, today is about a trigger and not about this air rifle.

Of course, I’ve already used the trigger a lot in the velocity testing I did a couple days ago. Now, however, I’ll be holding tight on a small target, and any aberration in the trigger will come though loud and clear. This is where the rubber meets the road! read more

Comparing the T05 trigger to the T06: Part 2

Posted on by B.B. Pelletier ↓ 53 Comments

by B.B. Pelletier

Part 1

RWS Diana 34 Panther
Part 1
Part 2
Part 3
Part 4

Pro-Guide spring retainer system for RWS Diana rifles — Part 5 The RWS Diana 34 Panther
Part 5

You’ll notice that I’m doing something different in today’s report on the RWS Diana model 34P T06 trigger. I linked not only to Part 1 of the T05/T06 trigger report, but also to the entire RWS Diana 34P report (it used be called the 34 Panther) that was done way back in 2007. I did that because in changing the rifle to the new T06 trigger, I also had to replace the piston. (In Part 1, I mentioned that the T06 trigger requires a different piston to work.)

I also linked to the report where I installed and tested the Air Venturi RWS Diana Pro Guide spring retainer system in this rifle. That single link takes you to the fifth report in an entire series on just the Pro Guide, and that tune is still in this test rifle. read more