Date: 20/8/2018 21:55
0

Aeon Scope Sunshade, 50mm, 3" reviews - page 1

Average Customer Review

4.5 (2 reviews)
3 star2 star1 star
Pre-order

Out of Stock

Create an online review   and share your thoughts with other customers

The most helpful favorable review

0 of 0 people found the following review helpful:

Overall rating:5.0

Value for money:5.0

By David from USA on 2015-10-30 10:58:05

Things I liked: It's a great sunshade but it didn't fit my scope.

Things I would have changed: nothing, it is what you expect.

What others should know: My scope did not have internal threads to thread it on. Make sure your scope has the threads to allow the extender to screw on.

The most helpful critical review

0 of 1 people found the following review helpful:

Overall rating:4.0

Value for money:5.0

By Woody from USA on 2016-01-16 18:56:02

Things I liked: Perfect fit and finish

Things I would have changed: Change the packaging! Put it in a zip lock bag and put the ID with Bar Code on exterior of bag! I received my Aeon Sunshade, 50mmx3", with ID/ barcode pasted directly to the shade. It took me 15 min, using my finger nail, to scrape off the glossy surface, and Mineral Spirits to rube off the residue glue! Luckily there was no marring of the finish, must have been power coated,

What others should know: Be carefull not to cross the fine threads. Start threading slowly, ANY resistance, stop, back off, and try again. After 2 full turns of no resistance you can seat it tight, no locktite needed.

Sort by:
  • 4.0 4.0

    5.0 5.0

    By Woody from USA on 2016-01-16
    See all my reviews
    Was this review helpful?
    1.01 rating

    Things I liked: Perfect fit and finish

    Things I would have changed: Change the packaging! Put it in a zip lock bag and put the ID with Bar Code on exterior of bag! I received my Aeon Sunshade, 50mmx3", with ID/ barcode pasted directly to the shade. It took me 15 min, using my finger nail, to scrape off the glossy surface, and Mineral Spirits to rube off the residue glue! Luckily there was no marring of the finish, must have been power coated,

    What others should know: Be carefull not to cross the fine threads. Start threading slowly, ANY resistance, stop, back off, and try again. After 2 full turns of no resistance you can seat it tight, no locktite needed.

     
  • 5.0 5.0

    5.0 5.0

    By David from USA on 2015-10-30
    See all my reviews
    Was this review helpful?
    0.00 ratings

    Things I liked: It's a great sunshade but it didn't fit my scope.

    Things I would have changed: nothing, it is what you expect.

    What others should know: My scope did not have internal threads to thread it on. Make sure your scope has the threads to allow the extender to screw on.

Navigation