Benjamin Hand Pump, Fits Crosman & Benjamin PCP Guns

Still going strong after a couple years of use. I've pumped up sever guns 100's of times with it. Pyramid Air sent me another one as part of a package deal back in October and I still haven't taken that one out of the box because the original that I bought a couple years back is still working great. Yes, there are better, but this one gets the job done.

Nothing

It has gotten dry a couple times and I just put some Hoppes gun oil on it to lube it back up. There is probably better lube for it, but I'm simple and tend to try to use whatever I have on hand to get the job done.

Pumps up rifle in a timely manner, not as difficult as I’ve read on the interwebs. Seriously, more guys should be working out

Longer hose

If you’re not in good shape it’s possibly going to make you sore but you’ll get used to it. Not to turn this into a lecture but exercise and eat right and your whole life will be better

works as advertised. Feels heavy duty. Very few parts to assemble (foot pads).

Would probably give it a longer hose. If you are filling an air gun direct you will likely be placing the gun on the ground since there is not much room for any other place to set it while you pump. Longer hoses are easy to come by and so I will just couple this pump to another hose when I need more length.

So far a great pump and hoping to get a long service life from it.

nothing

Test it before shippingjust wont

just wont work

Portability it's easier to carry than a compressor and no power source needed because we don't always shoot where there is access to AC or DC power

The whip length is very short at 12 inches you need to be uncomfortably close to the gun you have really no choice but to put the gun sideways on the ground( depending on fill port location) some guns might be more difficult

Overall a good pump you can buy a hose extension fairly cheap, it's a bit of a workout pumping 3000psi but hey it will probably build up your pecs and that should be expected from a high pressure hand pump

I like that it came free with the purchase of my armada. I only weight about 150-160lbs n I was able to fill my gun from 0psi to 3000 psi in about 7-8 minutes with very lil effort. I filled quickly consistent air pressure with every pump and was way worth the $0 it cost me.

I wouldve made a locking mechanism to hold the pump from expanding when being picked up or transported but not really a big deal at all. I wouldve liked to see the bleeder valve and pump hose on the same side so that all delicate pieces were on one side.

Great product

The pump does what it is supposed to do: charge a Marauder with compressed air up to 3000 PSI. It takes about 50 pumps to fill the Marauder from 2200 PSI to 3000PSI. I don't let mine go below 2000.

The gauge readings on the pump do not match the readings on the Marauder. The pump readings are between 500 and 800 PSI below the readings on the gun. I would prefer if the pump lasted longer and had a more trustworthy gauge. It is still usable since I only trust the gun's gauge and do not want to over fill it.

My previous Benjamin pump, built in 2014, lasted 7 years and propelled about 2,000 shots through my Marauder before it died. I estimate that to be about 40 full fillings over the years. I started to take the pump apart but convinced myself it would be safer to just replace it. The pump has 3 stages and operates up to 3600 PSI. I didn't want to mess with that. (My wife was happy with the decision.) :-)

This is good exercise! Take your time filling you gun. Only pump for a few minutes, 10 -15 pumps, and then let it cool down so it, AND you, do not overheat and melt down.

It came as a freebie with the rifle.

This pump was a lemon from the outset with a severe air leak at the brass bushing that sits between the pump and hose. At first glance I assumed the o-ring had been damaged or was missing when assembled at the factory (or it was a return?). I figured easy fix: remove bushing, replace o-ring, and done. With the first gentle pressure on the wrench, the brass bushing sheared off. On closer inspection, it was apparent the brass fitting had been over-tightened, deformed, and fractured. Unable to get the sheared off bushing removed, and since it was a freebie, into the trash it went.

I'm sure its a fine pump -- if you get one that hasn't been damaged before you get it.

It works as advertised.

Put the hose and pressure gauge on the same side.

Get ready for a workout. It does the job, do not pump fast, and hold for a second at the top and bottom of each stroke.

It pumps pretty easily and only takes a few minutes to get my Marauder to 2700psi.

Needs a longer hose.

I'm older so I pump slower. Probably be quicker for a younger person.