888-262-4867 (GUNS)Deals888-262-4867 (GUNS)Deals1-year limited warranty
Earn 130 Bullseye Bucks
PY-A-414
$129.95
List Price $137.95 Save $8.00 (5%)
Only 4 left in stock
Excluded from coupons
This item is not eligible for coupon discounts
In stock
This item is not eligible for coupon discounts
other products by AirForce
Unit Converter for Airgun Measurements
| Caliber | .22" (5.5mm) |
| Weight | .22" (5.5mm) |
other products by AirForce
Unit Converter for Airgun Measurements
Create an online review and share your thoughts with other customers
5.0 5.0
5.0 5.0
Verified Purchase
Things I liked: Arrived on time and in great shape! Thanks Pyramydair!! I It comes with end cap and a new set of screws. The barrel took less that 5 mins to install! Not back yard friendly but not real loud at the lower settings and heavy pellets. Very accurate. I love it
Things I would have changed: Nothing. Its like I got a talonp with a larger tank! In 22cal!
What others should know: I always clean new barrels this one was dirty. Use the new screws that come with this barrel. Do not over tighten. Before installing the barrel. Put some diver silicone grease on the breach end of the barrel for the Orings that are in the breach. This a very accurate barrel. I use the ring-loc valve pin cap kit from airforce. You can control the velocity of this beast. My beast light pellet tune, air arms falcon 5.52 head size! Ring loc .123, power wheel 6-8, fill pressure 2600psi, 10 shots over the chrony average 935FPS at 26FPE Stdev: 2.9, Accuracy is excellent. Its not very loud at this setting. Heavy pellets shot great also.Eunjin 32.5, ring loc .166, power wheel 12-1 fill pressure 3000psi, Ending pressure 2300psi, 10 shots over chrony at average of 996fps for 71fpe, Stdev:5.6. The adjustaty of the condor is outstanding. Your mileage will vary. Hope this helped. Happy safe shooting!
5.0 5.0
3.0 3.0
Things I liked: Makes the Talon 5 inches shorter. Very cool and accurate
Things I would have changed: Bit pricey
What others should know: This barrel likes lite pellets due to its short length
Create an online review and share your thoughts with other customers. Show Other Reviews
Got a question? Got an answer?
Log in, then enter your text.
Can I use this barrel in my TalonP?
Yes very well.
I'm trying to decrease power and noise. Will this 12" barrel fit in my 22 caliber Condor SS
Yes it will fit, also depending if your gun came with the sound -loc system it would decrease the noise that much more.There are suppressors available via the internet that work very well. I have a suppressor on my Talon-P that quiets the report very well , its not silent by any means or backyard friendly but still much better. The 12 inch barrel will limit f.p.s. but usually only around a 100 f.p.s. give or take.
Can you turn into another item to ship to Vietnam?
Read shipping restrictions at the bottom of the web page?
5.0 5.0
5.0 5.0
See all my reviews
Verified Purchase
Things I liked: Arrived on time, and without issue. Shot very accurate when you do your homework with tank pressure and pellet weight
Things I would have changed: Nothing
What others should know: When I was using this barrel, I was running it on the standard condor frame with no after market moderator. All I did was make a homemade slap mod for my hammer. With the talon tank (.177 valve version) running a power wheel of 6.6, with tank pressure starting at 2500 and ending at 2200, on 10 shots, I was able to maintain a 1.5 inch group at 50 yards while using 25 grain diabolos