Roll over image to zoom in
1-year limited warranty
List Price $16.45 Save $1.50 (9%)
1/8"npt male threads
For professional installation only.
Need to replace your air pressure gauge? Get this Air Venturi manometer, which reads up to 6,000 psi. Of course, you should fill your gun's air reservoir no higher than what the manufacturer recommends.
other products by Air Venturi
Create an online review and share your thoughts with other customers
Things I liked: Better quality gauge than my original Benjamin Maurauder gauge. When I fill the gun to 3000 psi the needle is in the center of the gauge and pressure matches my pump gauge.
Things I would have changed: Numbers could be slightly bigger. But not a big deal
Things I liked: Pretty accurate. I have several and they all read within about 100 psi of each other.
Things I would have changed: Nothing really. They are inexpensive, accurate and fit most rifles and fill adaptors.
What others should know: I use this same gauge in my Marauder, Air Venturi hand pump, ShoeBox compressor and 2 quick connect inline gauge adaptors.
Things I liked: seems to be accurate comes with sealant on threads the gauge reads to 6,000 psi my gun uses max 3,000 psi putting the most accurate part of the gauge at 3.000
Things I would have changed: i like it just the way it is
What others should know: aside from making sure the tank is empty when you unscrew the old gauge no
Create an online review and share your thoughts with other customers. Show Other Reviews
Will this gauge replace the gauge on the young hang air compressor?
No. The Yong Hang compressors fittings are all metric, This is 1/8" NPT.
Hj, will this fit on my Evanix Rainstorm?
No. We can find the correct gauge for you. Please e-mail : [email protected] with your name address,and ph # and we will set up an parts order.
What's the size? I need a 23mm for replacement on a broken huma regulator gauge.
The threads on this unit are 1/8 NPT. The Huma probably takes a 1/8" BSPP thread. I would contact Huma for a replacement.